Firmware2/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h

65 lines
1.8 KiB
C
Raw Normal View History

2019-07-28 04:21:54 +02:00
/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2019-07-28 04:21:54 +02:00
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
2019-07-28 04:21:54 +02:00
*
*/
#pragma once
#if NOT_TARGET(__STM32F1__)
2019-07-28 04:21:54 +02:00
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#include "pins_FYSETC_CHEETAH.h"
#undef X_HARDWARE_SERIAL
#undef Y_HARDWARE_SERIAL
#undef Z_HARDWARE_SERIAL
#undef E0_HARDWARE_SERIAL
#undef RGB_LED_R_PIN
#undef RGB_LED_G_PIN
#undef RGB_LED_B_PIN
2020-03-22 03:13:19 +01:00
#define FAN1_PIN PB0 // Fan1
2019-08-04 01:12:35 +02:00
2020-03-17 21:05:33 +01:00
#if HAS_TMC_UART
2019-07-28 04:21:54 +02:00
/**
* TMC2208/TMC2209 stepper drivers
*/
//
// Software serial
//
2020-03-22 03:13:19 +01:00
#define X_SERIAL_TX_PIN PA11
#define X_SERIAL_RX_PIN PA12
2019-07-28 04:21:54 +02:00
2020-03-22 03:13:19 +01:00
#define Y_SERIAL_TX_PIN PB6
#define Y_SERIAL_RX_PIN PB7
2019-07-28 04:21:54 +02:00
2020-03-22 03:13:19 +01:00
#define Z_SERIAL_TX_PIN PB10
#define Z_SERIAL_RX_PIN PB11
2019-07-28 04:21:54 +02:00
2020-03-22 03:13:19 +01:00
#define E0_SERIAL_TX_PIN PA2
#define E0_SERIAL_RX_PIN PA3
2019-07-28 04:21:54 +02:00
2019-11-07 00:08:12 +01:00
// Reduce baud rate to improve software serial reliability
2019-11-10 02:45:10 +01:00
#define TMC_BAUD_RATE 19200
2019-07-28 04:21:54 +02:00
#endif