Firmware2/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Wanhao 0ne+ pin assignments
 */

#ifndef __AVR_ATmega2560__
  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#define BOARD_INFO_NAME      "Wanhao i3 Mini 0ne+"
#define DEFAULT_MACHINE_NAME "i3 Mini"
#define BOARD_WEBSITE_URL    "https://tinyurl.com/yyxw7se7"

//
// Limit Switches
//
#define X_STOP_PIN         19
#define Y_STOP_PIN         18
#define Z_STOP_PIN         38

//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN  38
#endif

//
// Steppers
//
#define X_STEP_PIN         22
#define X_DIR_PIN          23
#define X_ENABLE_PIN       57

#define Y_STEP_PIN         25
#define Y_DIR_PIN          26
#define Y_ENABLE_PIN       24

#define Z_STEP_PIN         29
#define Z_DIR_PIN          39
#define Z_ENABLE_PIN       28

#define E0_STEP_PIN        55
#define E0_DIR_PIN         56
#define E0_ENABLE_PIN      54

//
// Temperature Sensors
//
#define TEMP_0_PIN         13
#define TEMP_BED_PIN       14

//
// Heaters / Fans
//
#define HEATER_0_PIN        4
#define HEATER_BED_PIN     44
#define FAN_PIN            12   // IO pin. Buffer needed

//
// SD Card
//
#define SD_DETECT_PIN      -1
#define SDSS               53

//
// Misc. Functions
//
#define BEEPER_PIN         37
#define KILL_PIN           64

//
// LCD / Controller (Integrated MINIPANEL)
//
#if ENABLED(MINIPANEL)
  #define DOGLCD_A0        40
  #define DOGLCD_CS        41
  #define LCD_BACKLIGHT_PIN 65   // Backlight LED on A11/D65
  #define LCD_RESET_PIN    27

  #define BTN_EN1           2
  #define BTN_EN2           3
  #define BTN_ENC           5

  // This display has adjustable contrast
  #define LCD_CONTRAST_MIN       0
  #define LCD_CONTRAST_MAX     255
  #define LCD_CONTRAST_INIT LCD_CONTRAST_MAX
#endif