Firmware2/Marlin/pins_AZTEEG_X3.h

99 lines
2.6 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2015-02-20 02:28:38 +01:00
/**
2016-02-29 08:13:50 +01:00
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
2015-02-20 02:28:38 +01:00
*/
2017-04-07 20:52:21 +02:00
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#if HOTENDS > 2 || E_STEPPERS > 2
#error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 6 // must define it here or else RAMPS will define it
2017-04-07 20:52:21 +02:00
#endif
#define BOARD_NAME "Azteeg X3"
2017-04-07 20:52:21 +02:00
2016-08-02 22:59:43 +02:00
#include "pins_RAMPS_13.h"
2015-02-20 02:28:38 +01:00
//
// Servos
//
2016-10-25 23:11:26 +02:00
#undef SERVO0_PIN
#undef SERVO1_PIN
#define SERVO0_PIN 44 // SERVO1 port
#define SERVO1_PIN 55 // SERVO2 port
//
// LCD / Controller
//
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef DOGLCD_A0
#undef DOGLCD_CS
#undef BTN_ENC
2015-07-31 16:36:20 +02:00
#define DOGLCD_A0 31
#define DOGLCD_CS 32
#define BTN_ENC 12
2015-07-31 16:36:20 +02:00
2016-09-24 23:26:41 +02:00
#undef STAT_LED_RED_PIN
#undef STAT_LED_BLUE_PIN
#define STAT_LED_RED_PIN 64
#define STAT_LED_BLUE_PIN 63
2016-09-24 23:26:41 +02:00
#else
2016-09-24 23:26:41 +02:00
#define STAT_LED_RED_PIN 6
#define STAT_LED_BLUE_PIN 11
2015-02-20 02:28:38 +01:00
#endif
2017-04-07 20:52:21 +02:00
//
// Misc
//
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
2017-04-07 20:52:21 +02:00
#undef STAT_LED_RED_PIN
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board
#undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_DIR_PIN
#if ENABLED(SPINDLE_LASER_ENABLE)
#undef SDA // use EXP3 header
#undef SCL
#if SERVO0_PIN == 7
#undef SERVO0_PIN
#def SERVO0_PIN 11
#endif
2017-04-07 20:52:21 +02:00
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 21
#endif