Firmware2/Marlin/language_pt.h

176 lines
9.1 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Portuguese
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_PT_H
#define LANGUAGE_PT_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "Cartao inserido"
#define MSG_SD_REMOVED "Cartao removido"
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Desactivar motores"
#define MSG_AUTO_HOME "Ir para origem"
2016-05-14 02:45:15 +02:00
#define MSG_AUTO_HOME_X "Ir para origem X"
#define MSG_AUTO_HOME_Y "Ir para origem Y"
#define MSG_AUTO_HOME_Z "Ir para origem Z"
#define MSG_LEVEL_BED_HOMING "Indo para origem"
2016-05-14 02:45:15 +02:00
#define MSG_LEVEL_BED_WAITING "Click para iniciar"
#define MSG_LEVEL_BED_NEXT_POINT "Proximo ponto"
#define MSG_LEVEL_BED_DONE "Pronto !"
#define MSG_LEVEL_BED_CANCEL "Cancelar"
#define MSG_SET_HOME_OFFSETS "Definir desvio"
2016-04-03 03:00:39 +02:00
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Definir origem"
#define MSG_PREHEAT_1 "Pre-aquecer PLA"
#define MSG_PREHEAT_1_N "Pre-aquecer PLA"
#define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo"
#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_1_SETTINGS "Definicoes PLA"
#define MSG_PREHEAT_2 "Pre-aquecer ABS"
#define MSG_PREHEAT_2_N "Pre-aquecer ABS "
#define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo"
#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_2_SETTINGS "Definicoes ABS"
#define MSG_COOLDOWN "Arrefecer"
#define MSG_SWITCH_PS_ON "Ligar"
#define MSG_SWITCH_PS_OFF "Desligar"
#define MSG_EXTRUDE "Extrudir"
#define MSG_RETRACT "Retrair"
#define MSG_MOVE_AXIS "Mover eixo"
#define MSG_MOVE_X "Mover X"
#define MSG_MOVE_Y "Mover Y"
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Mover Extrusor"
#define MSG_MOVE_01MM "Mover 0.1mm"
#define MSG_MOVE_1MM "Mover 1mm"
#define MSG_MOVE_10MM "Mover 10mm"
2015-01-28 06:53:08 +01:00
#define MSG_SPEED "Velocidade"
#define MSG_BED_Z "Base Z"
#define MSG_NOZZLE LCD_STR_THERMOMETER " Bico"
#define MSG_BED LCD_STR_THERMOMETER " Base"
#define MSG_FAN_SPEED "Vel. ventoinha"
2015-01-28 06:53:08 +01:00
#define MSG_FLOW "Fluxo"
#define MSG_CONTROL "Controlo"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Temp. Automatica"
#define MSG_ON "On "
#define MSG_OFF "Off"
2015-01-28 06:53:08 +01:00
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX " Vmax "
2015-01-28 06:53:08 +01:00
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
2016-04-07 14:00:08 +02:00
#define MSG_A_RETRACT "A-retraccao"
#define MSG_A_TRAVEL "A-movimento"
#define MSG_XSTEPS "X passo/mm"
#define MSG_YSTEPS "Y passo/mm"
#define MSG_ZSTEPS "Z passo/mm"
#define MSG_ESTEPS "E passo/mm"
2016-12-08 11:57:41 +01:00
#define MSG_E1STEPS "E1 passo/mm"
#define MSG_E2STEPS "E2 passo/mm"
#define MSG_E3STEPS "E3 passo/mm"
#define MSG_E4STEPS "E4 passo/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E em mm3"
#define MSG_FILAMENT_DIAM "Fil. Diam."
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar na memoria"
#define MSG_LOAD_EPROM "Carregar da memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH LCD_STR_REFRESH " Recarregar"
#define MSG_WATCH "Monitorizar"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Afinar"
#define MSG_PAUSE_PRINT "Pausar impressao"
#define MSG_RESUME_PRINT "Retomar impressao"
#define MSG_STOP_PRINT "Parar impressao"
#define MSG_CARD_MENU "Imprimir do SD"
#define MSG_NO_CARD "Sem cartao SD"
#define MSG_DWELL "Em espera..."
#define MSG_USERWAIT "A espera de ordem"
#define MSG_RESUMING "Retomando impressao"
#define MSG_PRINT_ABORTED "Impressao cancelada"
#define MSG_NO_MOVE "Sem movimento"
#define MSG_KILLED "EMERGENCIA. "
#define MSG_STOPPED "PARADO. "
2015-01-28 06:53:08 +01:00
#define MSG_CONTROL_RETRACT " Retrair mm"
#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm"
#define MSG_CONTROL_RETRACTF " Retrair V"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V"
#define MSG_AUTORETRACT " AutoRetr."
#define MSG_FILAMENTCHANGE "Trocar filamento"
#define MSG_INIT_SDCARD "Inici. cartao SD"
#define MSG_CNG_SDCARD "Trocar cartao SD"
#define MSG_ZPROBE_OUT "Sensor fora/base"
2016-06-28 00:46:40 +02:00
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Desvio Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Fim de curso"
2016-04-07 14:00:08 +02:00
#define MSG_HEATING_FAILED_LCD "Aquecimento falhou"
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP"
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
2016-04-07 14:00:08 +02:00
#define MSG_ERR_MAXTEMP "Err: T Maxima"
#define MSG_ERR_MINTEMP "Err: T Minima"
#define MSG_ERR_MAXTEMP_BED "Err: T Base Maxima"
#define MSG_ERR_MINTEMP_BED "Err: T Base Minima"
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecida."
#define MSG_BED_HEATING "Aquecendo base.."
#define MSG_BED_DONE "Base aquecida."
2016-04-12 04:42:09 +02:00
#define MSG_DELTA_CALIBRATE "Calibracao Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
#define MSG_DELTA_CALIBRATE_Y "Calibrar Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrar Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro"
2016-05-14 02:45:15 +02:00
#define MSG_LCD_ENDSTOPS "Fim de curso"
#endif // LANGUAGE_PT_H