Firmware2/Marlin/stepper.h

356 lines
12 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors
2016-05-08 21:16:26 +02:00
* Derived from Grbl
*
* Copyright (c) 2009-2011 Simen Svale Skogsrud
*
* Grbl is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Grbl is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
2011-11-20 14:50:08 +01:00
#ifndef STEPPER_H
#define STEPPER_H
2011-11-20 14:50:08 +01:00
#include "planner.h"
#include "speed_lookuptable.h"
#include "stepper_indirection.h"
#include "language.h"
2011-11-20 14:50:08 +01:00
class Stepper;
extern Stepper stepper;
2011-11-20 14:50:08 +01:00
// intRes = intIn1 * intIn2 >> 16
// uses:
// r26 to store 0
// r27 to store the byte 1 of the 24 bit result
#define MultiU16X8toH16(intRes, charIn1, intIn2) \
asm volatile ( \
"clr r26 \n\t" \
"mul %A1, %B2 \n\t" \
"movw %A0, r0 \n\t" \
"mul %A1, %A2 \n\t" \
"add %A0, r1 \n\t" \
"adc %B0, r26 \n\t" \
"lsr r0 \n\t" \
"adc %A0, r26 \n\t" \
"adc %B0, r26 \n\t" \
"clr r1 \n\t" \
: \
"=&r" (intRes) \
: \
"d" (charIn1), \
"d" (intIn2) \
: \
"r26" \
)
2011-11-20 14:50:08 +01:00
class Stepper {
2011-11-20 14:50:08 +01:00
public:
static block_t* current_block; // A pointer to the block currently being traced
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
static bool abort_on_endstop_hit;
#endif
#if ENABLED(Z_DUAL_ENDSTOPS)
static bool performing_homing;
#endif
private:
static unsigned char last_direction_bits; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter;
#if ENABLED(Z_DUAL_ENDSTOPS)
static bool locked_z_motor, locked_z2_motor;
#endif
// Counter variables for the Bresenham line tracer
static long counter_X, counter_Y, counter_Z, counter_E;
static volatile unsigned long step_events_completed; // The number of step events executed in the current block
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
static unsigned char old_OCR0A;
static volatile unsigned char eISR_Rate;
#if ENABLED(LIN_ADVANCE)
static volatile int e_steps[EXTRUDERS];
static int extruder_advance_k;
static int final_estep_rate;
static int current_estep_rate[EXTRUDERS]; // Actual extruder speed [steps/s]
static int current_adv_steps[EXTRUDERS]; // The amount of current added esteps due to advance.
// i.e., the current amount of pressure applied
// to the spring (=filament).
#else
static long e_steps[EXTRUDERS];
static long advance_rate, advance, final_advance;
static long old_advance;
#endif
#endif // ADVANCE or LIN_ADVANCE
static long acceleration_time, deceleration_time;
//unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
static unsigned short acc_step_rate; // needed for deceleration start point
static uint8_t step_loops, step_loops_nominal;
static unsigned short OCR1A_nominal;
static volatile long endstops_trigsteps[3];
static volatile long endstops_stepsTotal, endstops_stepsDone;
#if HAS_MOTOR_CURRENT_PWM
#ifndef PWM_MOTOR_CURRENT
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
#endif
const int motor_current_setting[3] = PWM_MOTOR_CURRENT;
#endif
//
// Positions of stepper motors, in step units
//
static volatile long count_position[NUM_AXIS];
//
// Current direction of stepper motors (+1 or -1)
//
static volatile signed char count_direction[NUM_AXIS];
public:
//
// Constructor / initializer
//
Stepper() { };
//
// Initialize stepper hardware
//
static void init();
//
// Interrupt Service Routines
//
static void isr();
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
static void advance_isr();
#endif
//
// Block until all buffered steps are executed
//
static void synchronize();
//
// Set the current position in steps
//
static void set_position(const long& x, const long& y, const long& z, const long& e);
static void set_e_position(const long& e);
//
// Set direction bits for all steppers
//
static void set_directions();
//
// Get the position of a stepper, in steps
//
static long position(AxisEnum axis);
//
// Report the positions of the steppers, in steps
//
static void report_positions();
//
// Get the position (mm) of an axis based on stepper position(s)
//
static float get_axis_position_mm(AxisEnum axis);
//
// The stepper subsystem goes to sleep when it runs out of things to execute. Call this
// to notify the subsystem that it is time to go to work.
//
static void wake_up();
//
// Wait for moves to finish and disable all steppers
//
static void finish_and_disable();
//
// Quickly stop all steppers and clear the blocks queue
//
static void quick_stop();
2011-11-20 14:50:08 +01:00
//
// The direction of a single motor
//
static FORCE_INLINE bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); }
#if HAS_DIGIPOTSS
static void digitalPotWrite(int address, int value);
#endif
static void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2);
static void digipot_current(uint8_t driver, int current);
static void microstep_mode(uint8_t driver, uint8_t stepping);
static void microstep_readings();
2011-11-20 14:50:08 +01:00
#if ENABLED(Z_DUAL_ENDSTOPS)
static FORCE_INLINE void set_homing_flag(bool state) { performing_homing = state; }
static FORCE_INLINE void set_z_lock(bool state) { locked_z_motor = state; }
static FORCE_INLINE void set_z2_lock(bool state) { locked_z2_motor = state; }
#endif
2011-11-20 14:50:08 +01:00
#if ENABLED(BABYSTEPPING)
static void babystep(const uint8_t axis, const bool direction); // perform a short step with a single stepper motor, outside of any convention
#endif
2011-11-20 14:50:08 +01:00
static inline void kill_current_block() {
step_events_completed = current_block->step_event_count;
}
2011-11-20 14:50:08 +01:00
//
// Handle a triggered endstop
//
static void endstop_triggered(AxisEnum axis);
//
// Triggered position of an axis in mm (not core-savvy)
//
static FORCE_INLINE float triggered_position_mm(AxisEnum axis) {
return endstops_trigsteps[axis] / planner.axis_steps_per_mm[axis];
}
2011-11-20 14:50:08 +01:00
#if ENABLED(LIN_ADVANCE)
2016-06-14 04:25:05 +02:00
void advance_M905(const float &k);
FORCE_INLINE int get_advance_k() { return extruder_advance_k; }
#endif
private:
static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) {
unsigned short timer;
NOMORE(step_rate, MAX_STEP_FREQUENCY);
2011-11-20 14:50:08 +01:00
if (step_rate > 20000) { // If steprate > 20kHz >> step 4 times
2016-05-11 22:57:23 +02:00
step_rate >>= 2;
step_loops = 4;
}
else if (step_rate > 10000) { // If steprate > 10kHz >> step 2 times
2016-05-11 22:57:23 +02:00
step_rate >>= 1;
step_loops = 2;
}
else {
step_loops = 1;
}
NOLESS(step_rate, F_CPU / 500000);
step_rate -= F_CPU / 500000; // Correct for minimal speed
if (step_rate >= (8 * 256)) { // higher step rate
unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate >> 8)][0];
unsigned char tmp_step_rate = (step_rate & 0x00ff);
unsigned short gain = (unsigned short)pgm_read_word_near(table_address + 2);
MultiU16X8toH16(timer, tmp_step_rate, gain);
timer = (unsigned short)pgm_read_word_near(table_address) - timer;
}
else { // lower step rates
unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0];
table_address += ((step_rate) >> 1) & 0xfffc;
timer = (unsigned short)pgm_read_word_near(table_address);
timer -= (((unsigned short)pgm_read_word_near(table_address + 2) * (unsigned char)(step_rate & 0x0007)) >> 3);
}
if (timer < 100) { // (20kHz - this should never happen)
timer = 100;
MYSERIAL.print(MSG_STEPPER_TOO_HIGH);
MYSERIAL.println(step_rate);
}
return timer;
}
// Initializes the trapezoid generator from the current block. Called whenever a new
// block begins.
static FORCE_INLINE void trapezoid_generator_reset() {
2011-11-20 14:50:08 +01:00
static int8_t last_extruder = -1;
if (current_block->direction_bits != last_direction_bits || current_block->active_extruder != last_extruder) {
last_direction_bits = current_block->direction_bits;
last_extruder = current_block->active_extruder;
set_directions();
}
2011-11-20 14:50:08 +01:00
#if ENABLED(ADVANCE)
advance = current_block->initial_advance;
final_advance = current_block->final_advance;
// Do E steps + advance steps
e_steps[current_block->active_extruder] += ((advance >>8) - old_advance);
old_advance = advance >>8;
#endif
deceleration_time = 0;
// step_rate to timer interval
OCR1A_nominal = calc_timer(current_block->nominal_rate);
// make a note of the number of step loops required at nominal speed
step_loops_nominal = step_loops;
acc_step_rate = current_block->initial_rate;
acceleration_time = calc_timer(acc_step_rate);
OCR1A = acceleration_time;
2016-05-04 18:53:17 +02:00
#if ENABLED(LIN_ADVANCE)
if (current_block->use_advance_lead) {
2016-05-04 18:53:17 +02:00
current_estep_rate[current_block->active_extruder] = ((unsigned long)acc_step_rate * current_block->e_speed_multiplier8) >> 8;
final_estep_rate = (current_block->nominal_rate * current_block->e_speed_multiplier8) >> 8;
}
#endif
// SERIAL_ECHO_START;
// SERIAL_ECHOPGM("advance :");
// SERIAL_ECHO(current_block->advance/256.0);
// SERIAL_ECHOPGM("advance rate :");
// SERIAL_ECHO(current_block->advance_rate/256.0);
// SERIAL_ECHOPGM("initial advance :");
// SERIAL_ECHO(current_block->initial_advance/256.0);
// SERIAL_ECHOPGM("final advance :");
// SERIAL_ECHOLN(current_block->final_advance/256.0);
}
static void digipot_init();
static void microstep_init();
};
#endif // STEPPER_H