Firmware2/Marlin/src/module/servo.cpp

59 lines
1.6 KiB
C++
Raw Normal View History

2017-11-19 20:39:46 +01:00
/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2017-11-19 20:39:46 +01:00
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
2017-11-19 20:39:46 +01:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
2017-11-19 20:39:46 +01:00
*
*/
/**
* module/servo.cpp
*/
#include "../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "servo.h"
HAL_SERVO_LIB servo[NUM_SERVOS];
#if ENABLED(EDITABLE_SERVO_ANGLES)
uint16_t servo_angles[NUM_SERVOS][2];
#endif
2017-11-19 20:39:46 +01:00
void servo_init() {
#if NUM_SERVOS >= 1 && HAS_SERVO_0
servo[0].attach(SERVO0_PIN);
2021-09-15 02:00:48 +02:00
DETACH_SERVO(0); // Just set up the pin. We don't have a position yet. Don't move to a random position.
2017-11-19 20:39:46 +01:00
#endif
#if NUM_SERVOS >= 2 && HAS_SERVO_1
servo[1].attach(SERVO1_PIN);
2021-09-15 02:00:48 +02:00
DETACH_SERVO(1);
2017-11-19 20:39:46 +01:00
#endif
#if NUM_SERVOS >= 3 && HAS_SERVO_2
servo[2].attach(SERVO2_PIN);
2021-09-15 02:00:48 +02:00
DETACH_SERVO(2);
2017-11-19 20:39:46 +01:00
#endif
#if NUM_SERVOS >= 4 && HAS_SERVO_3
servo[3].attach(SERVO3_PIN);
2021-09-15 02:00:48 +02:00
DETACH_SERVO(3);
2017-11-19 20:39:46 +01:00
#endif
}
#endif // HAS_SERVOS