Firmware2/Marlin/src/feature/controllerfan.cpp

85 lines
2.8 KiB
C++
Raw Normal View History

2017-09-18 08:44:59 +02:00
/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2017-09-18 08:44:59 +02:00
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
2017-09-18 08:44:59 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(USE_CONTROLLER_FAN)
2019-09-01 02:44:45 +02:00
#include "../module/stepper/indirection.h"
#include "../module/temperature.h"
uint8_t controllerfan_speed;
2017-09-18 08:44:59 +02:00
void controllerfan_update() {
static millis_t lastMotorOn = 0, // Last time a motor was turned on
nextMotorCheck = 0; // Last time the state was checked
const millis_t ms = millis();
if (ELAPSED(ms, nextMotorCheck)) {
nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
2018-08-29 08:49:30 +02:00
2020-01-20 03:05:53 +01:00
const bool xory = X_ENABLE_READ() == bool(X_ENABLE_ON) || Y_ENABLE_READ() == bool(Y_ENABLE_ON);
2018-08-29 08:49:30 +02:00
// If any of the drivers or the bed are enabled...
2020-01-20 03:05:53 +01:00
if (xory || Z_ENABLE_READ() == bool(Z_ENABLE_ON)
2018-05-04 07:15:31 +02:00
#if HAS_HEATED_BED
|| thermalManager.temp_bed.soft_pwm_amount > 0
2018-05-04 07:15:31 +02:00
#endif
2020-01-20 03:01:22 +01:00
#if HAS_X2_ENABLE
2020-01-20 03:05:53 +01:00
|| X2_ENABLE_READ() == bool(X_ENABLE_ON)
2020-01-20 03:01:22 +01:00
#endif
#if HAS_Y2_ENABLE
2020-01-20 03:05:53 +01:00
|| Y2_ENABLE_READ() == bool(Y_ENABLE_ON)
2020-01-20 03:01:22 +01:00
#endif
#if HAS_Z2_ENABLE
2020-01-20 03:05:53 +01:00
|| Z2_ENABLE_READ() == bool(Z_ENABLE_ON)
2020-01-20 03:01:22 +01:00
#endif
#if HAS_Z3_ENABLE
2020-01-20 03:05:53 +01:00
|| Z3_ENABLE_READ() == bool(Z_ENABLE_ON)
2020-01-20 03:01:22 +01:00
#endif
2020-01-20 06:35:07 +01:00
#if HAS_Z4_ENABLE
|| Z4_ENABLE_READ() == bool(Z_ENABLE_ON)
#endif
2020-01-20 03:01:22 +01:00
#if E_STEPPERS
2020-01-20 03:05:53 +01:00
#define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == bool(E_ENABLE_ON)
2020-01-20 03:01:22 +01:00
REPEAT(E_STEPPERS, _OR_ENABLED_E)
#endif
2017-09-18 08:44:59 +02:00
) {
lastMotorOn = ms; //... set time to NOW so the fan will turn on
}
// Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds
controllerfan_speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : (
#ifdef CONTROLLERFAN_SPEED_Z_ONLY
xory ? CONTROLLERFAN_SPEED : CONTROLLERFAN_SPEED_Z_ONLY
#else
CONTROLLERFAN_SPEED
#endif
);
2017-09-18 08:44:59 +02:00
// Allow digital or PWM fan output (see M42 handling)
WRITE(CONTROLLER_FAN_PIN, controllerfan_speed);
analogWrite(pin_t(CONTROLLER_FAN_PIN), controllerfan_speed);
2017-09-18 08:44:59 +02:00
}
}
#endif // USE_CONTROLLER_FAN