Firmware2/Marlin/src/lcd/ultralcd_impl_HD44780.h

1584 lines
49 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef ULTRALCD_IMPL_HD44780_H
#define ULTRALCD_IMPL_HD44780_H
/**
* Implementation of the LCD display routines for a Hitachi HD44780 display.
* These are the most common LCD character displays.
*/
#include "ultralcd_common_HD44780.h"
////////////////////////////////////
// Create LCD class instance and chipset-specific information
#if ENABLED(LCD_I2C_TYPE_PCF8575)
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_I2C_PIN_EN, LCD_I2C_PIN_RW, LCD_I2C_PIN_RS, LCD_I2C_PIN_D4, LCD_I2C_PIN_D5, LCD_I2C_PIN_D6, LCD_I2C_PIN_D7);
2015-05-13 11:02:19 +02:00
#elif ENABLED(LCD_I2C_TYPE_MCP23017)
#if ENABLED(DETECT_DEVICE)
2015-05-13 11:02:19 +02:00
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
2015-05-13 11:02:19 +02:00
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
2015-05-13 11:02:19 +02:00
#elif ENABLED(LCD_I2C_TYPE_MCP23008)
#if ENABLED(DETECT_DEVICE)
2015-05-13 11:02:19 +02:00
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
2015-05-13 11:02:19 +02:00
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif ENABLED(LCD_I2C_TYPE_PCA8574)
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
2015-05-13 11:02:19 +02:00
// 2 wire Non-latching LCD SR from:
2015-05-13 11:02:19 +02:00
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif ENABLED(SR_LCD_2W_NL)
2017-03-20 21:47:51 +01:00
#if PIN_EXISTS(SR_STROBE)
2016-09-25 12:28:04 +02:00
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN, SR_STROBE_PIN);
#else
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
#endif
#elif ENABLED(LCM1602)
LCD_CLASS lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);
#else
// Standard directly connected LCD implementations
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5, LCD_PINS_D6, LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
#include "fontutils.h"
#include "lcdprint.h"
#if ENABLED(LCD_PROGRESS_BAR)
2017-10-15 09:15:19 +02:00
static millis_t progress_bar_ms = 0; // Start millis of the current progress bar cycle
2014-12-28 07:26:14 +01:00
#if PROGRESS_MSG_EXPIRE > 0
2017-10-15 09:15:19 +02:00
static millis_t expire_status_ms = 0; // millis at which to expire the status message
2014-12-28 07:26:14 +01:00
#endif
#endif
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
static void lcd_implementation_update_indicators();
#endif
2017-06-06 00:41:38 +02:00
static void createChar_P(const char c, const byte * const ptr) {
byte temp[8];
2017-06-06 00:41:38 +02:00
for (uint8_t i = 0; i < 8; i++)
temp[i] = pgm_read_byte(&ptr[i]);
lcd.createChar(c, temp);
}
2017-06-06 00:41:38 +02:00
static void lcd_set_custom_characters(
2017-11-23 01:22:55 +01:00
#if ENABLED(LCD_PROGRESS_BAR) || ENABLED(SHOW_BOOTSCREEN)
const uint8_t screen_charset=CHARSET_INFO
2017-06-06 00:41:38 +02:00
#endif
) {
2017-11-23 01:22:55 +01:00
// CHARSET_BOOT
#if ENABLED(SHOW_BOOTSCREEN)
const static PROGMEM byte corner[4][8] = { {
B00000,
B00000,
B00000,
B00000,
B00001,
B00010,
B00100,
B00100
}, {
B00000,
B00000,
B00000,
B11100,
B11100,
B01100,
B00100,
B00100
}, {
B00100,
B00010,
B00001,
B00000,
B00000,
B00000,
B00000,
B00000
}, {
B00100,
B01000,
B10000,
B00000,
B00000,
B00000,
B00000,
B00000
} };
#endif // SHOW_BOOTSCREEN
// CHARSET_INFO
2017-06-06 00:41:38 +02:00
const static PROGMEM byte bedTemp[8] = {
2014-12-28 07:26:14 +01:00
B00000,
B11111,
B10101,
B10001,
B10101,
B11111,
B00000,
B00000
2017-06-06 00:41:38 +02:00
};
2017-06-06 00:41:38 +02:00
const static PROGMEM byte degree[8] = {
2014-12-28 07:26:14 +01:00
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
2017-06-06 00:41:38 +02:00
const static PROGMEM byte thermometer[8] = {
2014-12-28 07:26:14 +01:00
B00100,
B01010,
B01010,
B01010,
B01010,
B10001,
B10001,
B01110
};
2017-06-06 00:41:38 +02:00
const static PROGMEM byte uplevel[8] = {
B00100,
B01110,
B11111,
B00100,
B11100,
B00000,
B00000,
B00000
2017-06-06 00:41:38 +02:00
};
2017-06-06 00:41:38 +02:00
const static PROGMEM byte feedrate[8] = {
#if LCD_INFO_SCREEN_STYLE == 1
B00000,
B00100,
B10010,
B01001,
B10010,
B00100,
B00000,
B00000
#else
B11100,
B10000,
B11000,
B10111,
B00101,
B00110,
B00101,
B00000
#endif
2017-06-06 00:41:38 +02:00
};
2017-06-06 00:41:38 +02:00
const static PROGMEM byte clock[8] = {
2014-12-28 07:26:14 +01:00
B00000,
B01110,
B10011,
B10101,
B10001,
B01110,
B00000,
B00000
2017-06-06 00:41:38 +02:00
};
2014-12-28 07:26:14 +01:00
#if ENABLED(LCD_PROGRESS_BAR)
// CHARSET_INFO
const static PROGMEM byte progress[3][8] = { {
B00000,
B10000,
B10000,
B10000,
B10000,
B10000,
B10000,
B00000
}, {
B00000,
B10100,
B10100,
B10100,
B10100,
B10100,
B10100,
B00000
}, {
B00000,
B10101,
B10101,
B10101,
B10101,
B10101,
B10101,
B00000
} };
#endif // LCD_PROGRESS_BAR
2017-06-06 00:41:38 +02:00
#if ENABLED(SDSUPPORT)
2017-11-23 01:22:55 +01:00
// CHARSET_MENU
2017-06-06 00:41:38 +02:00
const static PROGMEM byte refresh[8] = {
B00000,
B00110,
B11001,
B11000,
B00011,
B10011,
B01100,
B00000,
2017-06-06 00:41:38 +02:00
};
const static PROGMEM byte folder[8] = {
B00000,
B11100,
B11111,
B10001,
B10001,
B11111,
2014-12-28 07:26:14 +01:00
B00000,
B00000
2017-06-06 00:41:38 +02:00
};
2017-11-23 01:22:55 +01:00
#endif // SDSUPPORT
#if ENABLED(SHOW_BOOTSCREEN)
// Set boot screen corner characters
if (screen_charset == CHARSET_BOOT) {
for (uint8_t i = 4; i--;)
createChar_P(i, corner[i]);
}
else
2014-12-28 07:26:14 +01:00
#endif
{ // Info Screen uses 5 special characters
createChar_P(LCD_BEDTEMP_CHAR, bedTemp);
createChar_P(LCD_DEGREE_CHAR, degree);
createChar_P(LCD_STR_THERMOMETER[0], thermometer);
createChar_P(LCD_FEEDRATE_CHAR, feedrate);
createChar_P(LCD_CLOCK_CHAR, clock);
#if ENABLED(LCD_PROGRESS_BAR)
if (screen_charset == CHARSET_INFO) { // 3 Progress bar characters for info screen
for (int16_t i = 3; i--;)
createChar_P(LCD_STR_PROGRESS[i], progress[i]);
2017-11-23 01:22:55 +01:00
}
else
#endif
{
createChar_P(LCD_UPLEVEL_CHAR, uplevel);
#if ENABLED(SDSUPPORT)
// SD Card sub-menu special characters
createChar_P(LCD_STR_REFRESH[0], refresh);
createChar_P(LCD_STR_FOLDER[0], folder);
#endif
2017-11-23 01:22:55 +01:00
}
}
2014-12-28 07:26:14 +01:00
}
static void lcd_implementation_init(
#if ENABLED(LCD_PROGRESS_BAR)
2017-11-23 01:22:55 +01:00
const uint8_t screen_charset=CHARSET_INFO
2014-12-28 07:26:14 +01:00
#endif
) {
#if ENABLED(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
2015-05-13 11:02:19 +02:00
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL, POSITIVE);
lcd.setBacklight(HIGH);
2015-05-13 11:02:19 +02:00
#endif
#elif ENABLED(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd_implementation_update_indicators();
2015-05-13 11:02:19 +02:00
#elif ENABLED(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif ENABLED(LCD_I2C_TYPE_PCA8574)
2015-05-13 11:02:19 +02:00
lcd.init();
lcd.backlight();
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
2015-05-13 11:02:19 +02:00
#endif
2015-05-13 11:02:19 +02:00
lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
2017-11-23 01:22:55 +01:00
screen_charset
2015-05-13 11:02:19 +02:00
#endif
);
2014-12-28 07:26:14 +01:00
2015-05-13 11:02:19 +02:00
lcd.clear();
}
2017-03-18 16:15:54 +01:00
void lcd_implementation_clear() { lcd.clear(); }
2015-05-13 11:02:19 +02:00
#if ENABLED(SHOW_BOOTSCREEN)
void lcd_erase_line(const int16_t line) {
lcd_moveto(0, line);
for (uint8_t i = LCD_WIDTH + 1; --i;)
lcd_put_wchar(' ');
2015-07-31 23:29:52 +02:00
}
// Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line
2018-10-01 06:44:33 +02:00
void lcd_scroll(const uint8_t col, const uint8_t line, PGM_P const text, const uint8_t len, const int16_t time) {
uint8_t slen = utf8_strlen_P(text);
if (slen < len) {
// Fits into,
lcd_moveto(col, line);
lcd_put_u8str_max_P(text, len);
while (slen < len) {
lcd_put_wchar(' ');
++slen;
}
safe_delay(time);
}
else {
2018-10-01 06:44:33 +02:00
PGM_P p = text;
int dly = time / MAX(slen, 1);
for (uint8_t i = 0; i <= slen; i++) {
// Go to the correct place
lcd_moveto(col, line);
// Print the text
lcd_put_u8str_max_P(p, len);
// Fill with spaces
uint8_t ix = slen - i;
while (ix < len) {
lcd_put_wchar(' ');
++ix;
}
// Delay
safe_delay(dly);
// Advance to the next UTF8 valid position
p++;
while (!START_OF_UTF8_CHAR(pgm_read_byte(p))) p++;
}
}
2015-07-31 23:29:52 +02:00
}
2018-10-01 06:44:33 +02:00
static void logo_lines(PGM_P const extra) {
int16_t indent = (LCD_WIDTH - 8 - utf8_strlen_P(extra)) / 2;
lcd_moveto(indent, 0); lcd_put_wchar('\x00'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x01');
lcd_moveto(indent, 1); lcd_put_u8str_P(PSTR("|Marlin|")); lcd_put_u8str_P(extra);
lcd_moveto(indent, 2); lcd_put_wchar('\x02'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x03');
}
2017-07-02 07:35:41 +02:00
void lcd_bootscreen() {
2017-11-27 03:07:17 +01:00
lcd_set_custom_characters(CHARSET_BOOT);
lcd.clear();
2015-07-31 23:29:52 +02:00
#define LCD_EXTRA_SPACE (LCD_WIDTH-8)
2016-04-17 08:50:36 +02:00
#define CENTER_OR_SCROLL(STRING,DELAY) \
lcd_erase_line(3); \
if (utf8_strlen(STRING) <= LCD_WIDTH) { \
lcd_moveto((LCD_WIDTH - utf8_strlen_P(PSTR(STRING))) / 2, 3); \
lcd_put_u8str_P(PSTR(STRING)); \
safe_delay(DELAY); \
2016-04-17 08:50:36 +02:00
} \
else { \
lcd_scroll(0, 3, PSTR(STRING), LCD_WIDTH, DELAY); \
}
#ifdef STRING_SPLASH_LINE1
2016-04-17 08:50:36 +02:00
//
// Show the Marlin logo with splash line 1
//
if (LCD_EXTRA_SPACE >= utf8_strlen(STRING_SPLASH_LINE1) + 1) {
2016-04-17 08:50:36 +02:00
//
// Show the Marlin logo, splash line1, and splash line 2
//
logo_lines(PSTR(" " STRING_SPLASH_LINE1));
#ifdef STRING_SPLASH_LINE2
2016-04-17 08:50:36 +02:00
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000);
#else
safe_delay(2000);
#endif
}
else {
2016-04-17 08:50:36 +02:00
//
// Show the Marlin logo with splash line 1
// After a delay show splash line 2, if it exists
//
#ifdef STRING_SPLASH_LINE2
#define _SPLASH_WAIT_1 1500
#else
#define _SPLASH_WAIT_1 2000
#endif
logo_lines(PSTR(""));
2016-04-17 08:50:36 +02:00
CENTER_OR_SCROLL(STRING_SPLASH_LINE1, _SPLASH_WAIT_1);
#ifdef STRING_SPLASH_LINE2
2016-04-17 08:50:36 +02:00
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 1500);
#endif
}
#elif defined(STRING_SPLASH_LINE2)
2016-04-17 08:50:36 +02:00
//
// Show splash line 2 only, alongside the logo if possible
//
if (LCD_EXTRA_SPACE >= utf8_strlen(STRING_SPLASH_LINE2) + 1) {
logo_lines(PSTR(" " STRING_SPLASH_LINE2));
safe_delay(2000);
}
else {
logo_lines(PSTR(""));
2016-04-17 08:50:36 +02:00
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000);
}
#else
2016-04-17 08:50:36 +02:00
//
// Show only the Marlin logo
//
logo_lines(PSTR(""));
safe_delay(2000);
#endif
lcd.clear();
safe_delay(100);
2017-11-27 03:07:17 +01:00
lcd_set_custom_characters();
lcd.clear();
}
#endif // SHOW_BOOTSCREEN
2016-07-10 04:50:45 +02:00
void lcd_kill_screen() {
lcd_moveto(0, 0);
lcd_put_u8str(lcd_status_message);
2016-07-10 04:50:45 +02:00
#if LCD_HEIGHT < 4
lcd_moveto(0, 2);
2016-07-10 04:50:45 +02:00
#else
lcd_moveto(0, 2);
lcd_put_u8str_P(PSTR(MSG_HALTED));
lcd_moveto(0, 3);
2016-07-10 04:50:45 +02:00
#endif
lcd_put_u8str_P(PSTR(MSG_PLEASE_RESET));
2016-07-10 04:50:45 +02:00
}
//
// Before homing, blink '123' <-> '???'.
// Homed but unknown... '123' <-> ' '.
// Homed and known, display constantly.
//
FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) {
lcd_put_wchar('X' + uint8_t(axis));
if (blink)
lcd_put_u8str(value);
else {
2018-06-12 04:29:31 +02:00
if (!TEST(axis_homed, axis))
while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
else {
#if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
2018-06-12 04:29:31 +02:00
if (!TEST(axis_known_position, axis))
lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
else
#endif
lcd_put_u8str(value);
}
}
}
FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, const bool blink) {
#if HAS_HEATED_BED
const bool isBed = heater < 0;
const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)),
t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater));
#else
const float t1 = thermalManager.degHotend(heater), t2 = thermalManager.degTargetHotend(heater);
#endif
if (prefix >= 0) lcd_put_wchar(prefix);
lcd_put_u8str(itostr3(t1 + 0.5));
lcd_put_wchar('/');
2017-11-03 05:59:42 +01:00
#if !HEATER_IDLE_HANDLER
UNUSED(blink);
#else
const bool is_idle = (
#if HAS_HEATED_BED
isBed ? thermalManager.is_bed_idle() :
2017-05-30 10:20:10 +02:00
#endif
thermalManager.is_heater_idle(heater)
);
if (!blink && is_idle) {
lcd_put_wchar(' ');
if (t2 >= 10) lcd_put_wchar(' ');
if (t2 >= 100) lcd_put_wchar(' ');
}
else
#endif
lcd_put_u8str(itostr3left(t2 + 0.5));
if (prefix >= 0) {
lcd_put_wchar(LCD_DEGREE_CHAR);
lcd_put_wchar(' ');
if (t2 < 10) lcd_put_wchar(' ');
}
}
FORCE_INLINE void _draw_bed_status(const bool blink) {
_draw_heater_status(-1, (
#if HAS_LEVELING
planner.leveling_active && blink ? '_' :
#endif
LCD_BEDTEMP_CHAR
), blink);
}
#if HAS_PRINT_PROGRESS
FORCE_INLINE void _draw_print_progress() {
const uint8_t percent = (
#if ENABLED(SDSUPPORT)
2018-10-19 20:52:44 +02:00
IS_SD_PRINTING() ? card.percentDone() : 0
#else
progress_bar_percent
#endif
);
lcd_put_u8str_P(PSTR(
#if ENABLED(SDSUPPORT)
"SD"
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
"P:"
#endif
));
if (percent)
lcd_put_u8str(itostr3(percent));
else
lcd_put_u8str_P(PSTR("---"));
lcd_put_wchar('%');
}
#endif
#if ENABLED(LCD_PROGRESS_BAR)
inline void lcd_draw_progress_bar(const uint8_t percent) {
const int16_t tix = (int16_t)(percent * (LCD_WIDTH) * 3) / 100,
2017-06-06 00:41:38 +02:00
cel = tix / 3,
rem = tix % 3;
uint8_t i = LCD_WIDTH;
char msg[LCD_WIDTH + 1], b = ' ';
2017-06-06 00:41:38 +02:00
msg[LCD_WIDTH] = '\0';
while (i--) {
if (i == cel - 1)
b = LCD_STR_PROGRESS[2];
else if (i == cel && rem != 0)
b = LCD_STR_PROGRESS[rem - 1];
msg[i] = b;
}
lcd_put_u8str(msg);
}
#endif // LCD_PROGRESS_BAR
FORCE_INLINE void _draw_status_message(const bool blink) {
lcd_moveto(0, LCD_HEIGHT - 1);
#if ENABLED(LCD_PROGRESS_BAR)
// Draw the progress bar if the message has shown long enough
// or if there is no message set.
#if DISABLED(LCD_SET_PROGRESS_MANUALLY)
const uint8_t progress_bar_percent = card.percentDone();
#endif
if (progress_bar_percent > 2 && (ELAPSED(millis(), progress_bar_ms + PROGRESS_BAR_MSG_TIME) || !lcd_status_message[0]))
return lcd_draw_progress_bar(progress_bar_percent);
#elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
// Show Filament Diameter and Volumetric Multiplier %
// After allowing lcd_status_message to show for 5 seconds
if (ELAPSED(millis(), previous_lcd_status_ms + 5000UL)) {
lcd_put_u8str_P(PSTR("Dia "));
lcd_put_u8str(ftostr12ns(filament_width_meas));
lcd_put_u8str_P(PSTR(" V"));
lcd_put_u8str(itostr3(100.0 * (
parser.volumetric_enabled
? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
: planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
)
));
lcd_put_wchar('%');
return;
}
#endif // FILAMENT_LCD_DISPLAY && SDSUPPORT
#if ENABLED(STATUS_MESSAGE_SCROLLING)
static bool last_blink = false;
// Get the UTF8 character count of the string
uint8_t slen = utf8_strlen(lcd_status_message);
// If the string fits into the LCD, just print it and do not scroll it
if (slen <= LCD_WIDTH) {
// The string isn't scrolling and may not fill the screen
lcd_put_u8str(lcd_status_message);
// Fill the rest with spaces
while (slen < LCD_WIDTH) {
lcd_put_wchar(' ');
++slen;
}
}
else {
// String is larger than the available space in screen.
// Get a pointer to the next valid UTF8 character
const char *stat = lcd_status_message + status_scroll_offset;
// Get the string remaining length
const uint8_t rlen = utf8_strlen(stat);
// If we have enough characters to display
if (rlen >= LCD_WIDTH) {
// The remaining string fills the screen - Print it
lcd_put_u8str_max(stat, LCD_WIDTH);
}
else {
// The remaining string does not completely fill the screen
lcd_put_u8str_max(stat, LCD_WIDTH); // The string leaves space
uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters
lcd_put_wchar('.'); // Always at 1+ spaces left, draw a dot
if (--chars) { // Draw a second dot if there's space
lcd_put_wchar('.');
if (--chars)
lcd_put_u8str_max(lcd_status_message, chars); // Print a second copy of the message
}
}
if (last_blink != blink) {
last_blink = blink;
// Adjust by complete UTF8 characters
if (status_scroll_offset < slen) {
status_scroll_offset++;
while (!START_OF_UTF8_CHAR(lcd_status_message[status_scroll_offset]))
status_scroll_offset++;
}
else
status_scroll_offset = 0;
}
}
#else
UNUSED(blink);
// Get the UTF8 character count of the string
uint8_t slen = utf8_strlen(lcd_status_message);
// Just print the string to the LCD
lcd_put_u8str_max(lcd_status_message, LCD_WIDTH);
// Fill the rest with spaces if there are missing spaces
while (slen < LCD_WIDTH) {
lcd_put_wchar(' ');
++slen;
}
#endif
}
#if LCD_INFO_SCREEN_STYLE == 0
/**
* LCD_INFO_SCREEN_STYLE 0 : Classic Status Screen
*
* 16x2 |000/000 B000/000|
* |0123456789012345|
*
* 16x4 |000/000 B000/000|
* |SD---% Z 000.00|
* |F---% T--:--|
* |0123456789012345|
*
* 20x2 |T000/000° B000/000° |
* |01234567890123456789|
*
* 20x4 |T000/000° B000/000° |
* |X 000 Y 000 Z000.000|
* |F---% SD---% T--:--|
* |01234567890123456789|
*/
static void lcd_impl_status_screen_0() {
const bool blink = lcd_blink();
// ========== Line 1 ==========
lcd_moveto(0, 0);
#if LCD_WIDTH < 20
//
// Hotend 0 Temperature
//
_draw_heater_status(0, -1, blink);
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1
lcd_moveto(8, 0);
lcd_put_wchar((char)LCD_STR_THERMOMETER[0]);
_draw_heater_status(1, -1, blink);
#elif HAS_HEATED_BED
lcd_moveto(8, 0);
lcd_put_wchar((char)LCD_BEDTEMP_CHAR);
_draw_heater_status(-1, -1, blink);
#endif
#else // LCD_WIDTH >= 20
//
// Hotend 0 Temperature
//
_draw_heater_status(0, LCD_STR_THERMOMETER[0], blink);
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1
lcd_moveto(10, 0);
_draw_heater_status(1, LCD_STR_THERMOMETER[0], blink);
#elif HAS_HEATED_BED
lcd_moveto(10, 0);
_draw_bed_status(blink);
#endif
#endif // LCD_WIDTH >= 20
// ========== Line 2 ==========
#if LCD_HEIGHT > 2
#if LCD_WIDTH < 20
#if HAS_PRINT_PROGRESS
lcd_moveto(0, 2);
_draw_print_progress();
#endif
#else // LCD_WIDTH >= 20
lcd_moveto(0, 1);
// If the first line has two extruder temps,
// show more temperatures on the next line
#if HOTENDS > 2 || (HOTENDS > 1 && HAS_HEATED_BED)
#if HOTENDS > 2
_draw_heater_status(2, LCD_STR_THERMOMETER[0], blink);
lcd_moveto(10, 1);
#endif
_draw_bed_status(blink);
#else // HOTENDS <= 2 && (HOTENDS <= 1 || !HAS_HEATED_BED)
_draw_axis_value(X_AXIS, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS])), blink);
lcd_put_wchar(' ');
_draw_axis_value(Y_AXIS, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS])), blink);
#endif // HOTENDS <= 2 && (HOTENDS <= 1 || !HAS_HEATED_BED)
#endif // LCD_WIDTH >= 20
lcd_moveto(LCD_WIDTH - 8, 1);
_draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS])), blink);
#if HAS_LEVELING && !HAS_HEATED_BED
lcd_put_wchar(planner.leveling_active || blink ? '_' : ' ');
#endif
#endif // LCD_HEIGHT > 2
// ========== Line 3 ==========
2017-09-27 19:21:15 +02:00
#if LCD_HEIGHT > 3
lcd_moveto(0, 2);
lcd_put_wchar(LCD_FEEDRATE_CHAR);
lcd_put_u8str(itostr3(feedrate_percentage));
lcd_put_wchar('%');
#if LCD_WIDTH >= 20 && HAS_PRINT_PROGRESS
lcd_moveto(7, 2);
_draw_print_progress();
#endif
char buffer[14];
duration_t elapsed = print_job_timer.duration();
uint8_t len = elapsed.toDigital(buffer);
lcd_moveto(LCD_WIDTH - len - 1, 2);
lcd_put_wchar(LCD_CLOCK_CHAR);
lcd_put_u8str(buffer);
#endif // LCD_HEIGHT > 3
2016-12-05 04:09:12 +01:00
// ========= Last Line ========
//
// Status Message (which may be a Progress Bar or Filament display)
//
_draw_status_message(blink);
}
#elif LCD_INFO_SCREEN_STYLE == 1
/**
* LCD_INFO_SCREEN_STYLE 1 : Prusa-style Status Screen
*
* |T000/000° Z 000.00 |
* |B000/000° F---% |
* |SD---% T--:-- |
* |01234567890123456789|
*
* |T000/000° Z 000.00 |
* |T000/000° F---% |
* |B000/000° SD---% |
* |01234567890123456789|
*/
static void lcd_impl_status_screen_1() {
const bool blink = lcd_blink();
// ========== Line 1 ==========
//
// Hotend 0 Temperature
//
lcd_moveto(0, 0);
_draw_heater_status(0, LCD_STR_THERMOMETER[0], blink);
//
// Z Coordinate
//
lcd_moveto(LCD_WIDTH - 9, 0);
_draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS])), blink);
#if HAS_LEVELING && (HOTENDS > 1 || !HAS_HEATED_BED)
lcd_moveto(LCD_WIDTH - 1, 0);
lcd_put_wchar(planner.leveling_active || blink ? '_' : ' ');
#endif
// ========== Line 2 ==========
//
// Hotend 1 or Bed Temperature
//
lcd_moveto(0, 1);
#if HOTENDS > 1
_draw_heater_status(1, LCD_STR_THERMOMETER[0], blink);
#elif HAS_HEATED_BED
_draw_bed_status(blink);
#endif
lcd_moveto(LCD_WIDTH - 9, 1);
lcd_put_wchar(LCD_FEEDRATE_CHAR);
lcd_put_u8str(itostr3(feedrate_percentage));
lcd_put_wchar('%');
// ========== Line 3 ==========
//
// SD Percent, Hotend 2, or Bed
//
lcd_moveto(0, 2);
#if HOTENDS > 2
_draw_heater_status(2, LCD_STR_THERMOMETER[0], blink);
#elif HOTENDS > 1 && HAS_HEATED_BED
_draw_bed_status(blink);
#elif HAS_PRINT_PROGRESS
#define DREW_PRINT_PROGRESS
_draw_print_progress();
#endif
//
// Elapsed Time or SD Percent
//
lcd_moveto(LCD_WIDTH - 9, 2);
#if HAS_PRINT_PROGRESS && !defined(DREW_PRINT_PROGRESS)
_draw_print_progress();
#else
duration_t elapsed = print_job_timer.duration();
char buffer[14];
(void)elapsed.toDigital(buffer);
lcd_put_wchar(LCD_CLOCK_CHAR);
lcd_put_u8str(buffer);
#endif
// ========== Line 4 ==========
//
// Status Message (which may be a Progress Bar or Filament display)
//
_draw_status_message(blink);
}
#endif
2016-08-21 01:12:57 +02:00
#if ENABLED(ULTIPANEL)
#if ENABLED(ADVANCED_PAUSE_FEATURE)
2017-02-18 06:57:13 +01:00
static void lcd_implementation_hotend_status(const uint8_t row, const uint8_t extruder=active_extruder) {
2017-02-18 06:57:13 +01:00
if (row < LCD_HEIGHT) {
lcd_moveto(LCD_WIDTH - 9, row);
_draw_heater_status(extruder, LCD_STR_THERMOMETER[0], lcd_blink());
2017-02-18 06:57:13 +01:00
}
}
#endif // ADVANCED_PAUSE_FEATURE
2017-02-18 06:57:13 +01:00
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_static(const uint8_t row, PGM_P pstr, const bool center=true, const bool invert=false, const char *valstr=NULL) {
UNUSED(invert);
int8_t n = LCD_WIDTH;
lcd_moveto(0, row);
if (center && !valstr) {
int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2;
while (--pad >= 0) { lcd_put_wchar(' '); n--; }
2016-08-21 01:12:57 +02:00
}
n -= lcd_put_u8str_max_P(pstr, n);
if (valstr) n -= lcd_put_u8str_max(valstr, n);
for (; n > 0; --n) lcd_put_wchar(' ');
}
2016-08-21 01:12:57 +02:00
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_generic(const bool sel, const uint8_t row, PGM_P pstr, const char pre_char, const char post_char) {
2016-08-21 01:12:57 +02:00
uint8_t n = LCD_WIDTH - 2;
lcd_moveto(0, row);
lcd_put_wchar(sel ? pre_char : ' ');
n -= lcd_put_u8str_max_P(pstr, n);
while (n--) lcd_put_wchar(' ');
lcd_put_wchar(post_char);
}
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_setting_edit_generic(const bool sel, const uint8_t row, PGM_P pstr, const char pre_char, const char* const data) {
uint8_t n = LCD_WIDTH - 2 - utf8_strlen(data);
lcd_moveto(0, row);
lcd_put_wchar(sel ? pre_char : ' ');
n -= lcd_put_u8str_max_P(pstr, n);
lcd_put_wchar(':');
while (n--) lcd_put_wchar(' ');
lcd_put_u8str(data);
}
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_setting_edit_generic_P(const bool sel, const uint8_t row, PGM_P pstr, const char pre_char, const char* const data) {
uint8_t n = LCD_WIDTH - 2 - utf8_strlen_P(data);
lcd_moveto(0, row);
lcd_put_wchar(sel ? pre_char : ' ');
n -= lcd_put_u8str_max_P(pstr, n);
lcd_put_wchar(':');
while (n--) lcd_put_wchar(' ');
lcd_put_u8str_P(data);
}
#define DRAWMENU_SETTING_EDIT_GENERIC(_src) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _src)
#define DRAW_BOOL_SETTING(sel, row, pstr, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
2016-08-21 01:12:57 +02:00
2018-10-01 06:44:33 +02:00
void lcd_implementation_drawedit(PGM_P pstr, const char* const value=NULL) {
lcd_moveto(1, 1);
lcd_put_u8str_P(pstr);
2016-08-21 01:12:57 +02:00
if (value != NULL) {
lcd_put_wchar(':');
int len = utf8_strlen(value);
const uint8_t valrow = (utf8_strlen_P(pstr) + 1 + len + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit
lcd_moveto((LCD_WIDTH - 1) - (len + 1), valrow); // Right-justified, padded by spaces
lcd_put_wchar(' '); // overwrite char if value gets shorter
lcd_put_u8str(value);
2016-08-21 01:12:57 +02:00
}
}
2016-08-21 01:12:57 +02:00
#if ENABLED(SDSUPPORT)
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, PGM_P const pstr, CardReader &theCard, const uint8_t concat, const char post_char) {
2016-08-21 01:12:57 +02:00
UNUSED(pstr);
lcd_moveto(0, row);
lcd_put_wchar(sel ? '>' : ' ');
2017-10-19 05:15:33 +02:00
uint8_t n = LCD_WIDTH - concat;
2018-07-13 08:44:27 +02:00
const char *outstr = theCard.longest_filename();
if (theCard.longFilename[0]) {
2017-10-19 05:15:33 +02:00
#if ENABLED(SCROLL_LONG_FILENAMES)
if (sel) {
uint8_t name_hash = row;
for (uint8_t l = FILENAME_LENGTH; l--;)
2018-07-13 08:44:27 +02:00
name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ theCard.filename[l]; // rotate, xor
2017-10-19 05:15:33 +02:00
if (filename_scroll_hash != name_hash) { // If the hash changed...
filename_scroll_hash = name_hash; // Save the new hash
2018-07-13 08:44:27 +02:00
filename_scroll_max = MAX(0, utf8_strlen(theCard.longFilename) - n); // Update the scroll limit
2017-10-19 05:15:33 +02:00
filename_scroll_pos = 0; // Reset scroll to the start
lcd_status_update_delay = 8; // Don't scroll right away
}
outstr += filename_scroll_pos;
}
#else
2018-07-13 08:44:27 +02:00
theCard.longFilename[n] = '\0'; // cutoff at screen edge
2017-10-19 05:15:33 +02:00
#endif
2016-08-21 01:12:57 +02:00
}
2017-10-19 05:15:33 +02:00
lcd_moveto(0, row);
lcd_put_wchar(sel ? '>' : ' ');
n -= lcd_put_u8str_max(outstr, n);
2017-10-19 05:15:33 +02:00
while (n) { --n; lcd_put_wchar(' '); }
lcd_put_wchar(post_char);
2016-08-21 01:12:57 +02:00
}
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_sdfile(const bool sel, const uint8_t row, PGM_P pstr, CardReader &theCard) {
2018-07-13 08:44:27 +02:00
lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, ' ');
2016-08-21 01:12:57 +02:00
}
2018-10-01 06:44:33 +02:00
static void lcd_implementation_drawmenu_sddirectory(const bool sel, const uint8_t row, PGM_P pstr, CardReader &theCard) {
2018-07-13 08:44:27 +02:00
lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, LCD_STR_FOLDER[0]);
2016-08-21 01:12:57 +02:00
}
#endif // SDSUPPORT
2017-06-15 22:10:45 +02:00
#define lcd_implementation_drawmenu_back(sel, row, pstr, dummy) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_UPLEVEL_CHAR, LCD_UPLEVEL_CHAR)
2016-08-21 01:12:57 +02:00
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
2016-08-21 01:12:57 +02:00
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
2016-08-21 01:12:57 +02:00
extern millis_t next_button_update_ms;
static uint8_t lcd_implementation_read_slow_buttons() {
#if ENABLED(LCD_I2C_TYPE_MCP23017)
// Reading these buttons this is likely to be too slow to call inside interrupt context
// so they are called during normal lcd_update
uint8_t slow_bits = lcd.readButtons() << B_I2C_BTN_OFFSET;
#if ENABLED(LCD_I2C_VIKI)
if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked
slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated
#endif // LCD_I2C_VIKI
return slow_bits;
#endif // LCD_I2C_TYPE_MCP23017
}
#endif // LCD_HAS_SLOW_BUTTONS
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
2015-04-13 03:07:08 +02:00
static void lcd_implementation_update_indicators() {
// Set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
2016-03-06 03:27:45 +01:00
if (thermalManager.degTargetBed() > 0) leds |= LED_A;
2016-03-06 03:27:45 +01:00
if (thermalManager.degTargetHotend(0) > 0) leds |= LED_B;
2016-03-06 03:27:45 +01:00
#if FAN_COUNT > 0
if (0
#if HAS_FAN0
|| fan_speed[0]
#endif
#if HAS_FAN1
|| fan_speed[1]
#endif
#if HAS_FAN2
|| fan_speed[2]
#endif
) leds |= LED_C;
#endif // FAN_COUNT > 0
2016-03-06 03:27:45 +01:00
#if HOTENDS > 1
if (thermalManager.degTargetHotend(1) > 0) leds |= LED_C;
#endif
2016-03-06 03:27:45 +01:00
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
}
2015-04-13 03:07:08 +02:00
#endif // LCD_HAS_STATUS_INDICATORS
#if ENABLED(AUTO_BED_LEVELING_UBL)
2017-06-21 22:26:59 +02:00
/**
Possible map screens:
2017-07-02 01:37:33 +02:00
16x2 |X000.00 Y000.00|
|(00,00) Z00.000|
2017-07-02 01:37:33 +02:00
20x2 | X:000.00 Y:000.00 |
| (00,00) Z:00.000 |
2017-07-02 01:37:33 +02:00
16x4 |+-------+(00,00)|
|| |X000.00|
|| |Y000.00|
|+-------+Z00.000|
2017-07-02 01:37:33 +02:00
20x4 | +-------+ (00,00) |
| | | X:000.00|
| | | Y:000.00|
| +-------+ Z:00.000|
*/
2017-07-02 01:37:33 +02:00
typedef struct {
uint8_t custom_char_bits[ULTRA_Y_PIXELS_PER_CHAR];
} custom_char;
typedef struct {
uint8_t column, row;
uint8_t y_pixel_offset, x_pixel_offset;
uint8_t x_pixel_mask;
} coordinate;
void add_edges_to_custom_char(custom_char * const custom, coordinate * const ul, coordinate * const lr, coordinate * const brc, const uint8_t cell_location);
FORCE_INLINE static void clear_custom_char(custom_char * const cc) { ZERO(cc->custom_char_bits); }
/*
// This debug routine should be deleted by anybody that sees it. It doesn't belong here
// But I'm leaving it for now until we know the 20x4 Radar Map is working right.
// We may need it again if any funny lines show up on the mesh points.
void dump_custom_char(char *title, custom_char *c) {
SERIAL_PROTOCOLLN(title);
for (uint8_t j = 0; j < 8; j++) {
for (uint8_t i = 7; i >= 0; i--)
SERIAL_PROTOCOLCHAR(TEST(c->custom_char_bits[j], i) ? '1' : '0');
SERIAL_EOL();
}
SERIAL_EOL();
}
//*/
2017-07-02 01:37:33 +02:00
coordinate pixel_location(int16_t x, int16_t y) {
coordinate ret_val;
int16_t xp, yp, r, c;
x++; y++; // +1 because lines on the left and top
c = x / (ULTRA_X_PIXELS_PER_CHAR);
r = y / (ULTRA_Y_PIXELS_PER_CHAR);
2017-06-28 05:19:32 +02:00
ret_val.column = c;
ret_val.row = r;
2017-06-28 05:19:32 +02:00
xp = x - c * (ULTRA_X_PIXELS_PER_CHAR); // get the pixel offsets into the character cell
xp = ULTRA_X_PIXELS_PER_CHAR - 1 - xp; // column within relevant character cell (0 on the right)
yp = y - r * (ULTRA_Y_PIXELS_PER_CHAR);
2017-06-28 05:19:32 +02:00
ret_val.x_pixel_mask = _BV(xp);
ret_val.x_pixel_offset = xp;
ret_val.y_pixel_offset = yp;
return ret_val;
}
2017-06-28 05:19:32 +02:00
2017-11-03 05:59:42 +01:00
inline coordinate pixel_location(const uint8_t x, const uint8_t y) { return pixel_location((int16_t)x, (int16_t)y); }
2017-06-28 05:19:32 +02:00
2017-11-03 05:59:42 +01:00
void lcd_implementation_ubl_plot(const uint8_t x, const uint8_t inverted_y) {
2017-06-28 05:19:32 +02:00
#if LCD_WIDTH >= 20
#define _LCD_W_POS 12
#define _PLOT_X 1
#define _MAP_X 3
#define _LABEL(C,X,Y) lcd_moveto(X, Y); lcd_put_u8str(C)
#define _XLABEL(X,Y) _LABEL("X:",X,Y)
#define _YLABEL(X,Y) _LABEL("Y:",X,Y)
#define _ZLABEL(X,Y) _LABEL("Z:",X,Y)
#else
#define _LCD_W_POS 8
#define _PLOT_X 0
#define _MAP_X 1
#define _LABEL(X,Y,C) lcd_moveto(X, Y); lcd_put_wchar(C)
#define _XLABEL(X,Y) _LABEL('X',X,Y)
#define _YLABEL(X,Y) _LABEL('Y',X,Y)
#define _ZLABEL(X,Y) _LABEL('Z',X,Y)
#endif
#if LCD_HEIGHT <= 3 // 16x2 or 20x2 display
/**
* Show X and Y positions
*/
_XLABEL(_PLOT_X, 0);
2018-05-01 14:08:47 +02:00
lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x]))));
_YLABEL(_LCD_W_POS, 0);
2018-05-01 14:08:47 +02:00
lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y]))));
lcd_moveto(_PLOT_X, 0);
#else // 16x4 or 20x4 display
coordinate upper_left, lower_right, bottom_right_corner;
custom_char new_char;
uint8_t i, j, k, l, m, n, n_rows, n_cols, y,
bottom_line, right_edge,
x_map_pixels, y_map_pixels,
pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt,
suppress_x_offset = 0, suppress_y_offset = 0;
y = GRID_MAX_POINTS_Y - inverted_y - 1;
upper_left.column = 0;
upper_left.row = 0;
lower_right.column = 0;
lower_right.row = 0;
lcd_implementation_clear();
x_map_pixels = (ULTRA_X_PIXELS_PER_CHAR) * (ULTRA_COLUMNS_FOR_MESH_MAP) - 2; // minus 2 because we are drawing a box around the map
y_map_pixels = (ULTRA_Y_PIXELS_PER_CHAR) * (ULTRA_ROWS_FOR_MESH_MAP) - 2;
pixels_per_x_mesh_pnt = x_map_pixels / (GRID_MAX_POINTS_X);
pixels_per_y_mesh_pnt = y_map_pixels / (GRID_MAX_POINTS_Y);
if (pixels_per_x_mesh_pnt >= ULTRA_X_PIXELS_PER_CHAR) { // There are only 2 custom characters available, so the X
pixels_per_x_mesh_pnt = ULTRA_X_PIXELS_PER_CHAR; // size of the mesh point needs to fit within them independent
suppress_x_offset = 1; // of where the starting pixel is located.
}
if (pixels_per_y_mesh_pnt >= ULTRA_Y_PIXELS_PER_CHAR) { // There are only 2 custom characters available, so the Y
pixels_per_y_mesh_pnt = ULTRA_Y_PIXELS_PER_CHAR; // size of the mesh point needs to fit within them independent
suppress_y_offset = 1; // of where the starting pixel is located.
}
x_map_pixels = pixels_per_x_mesh_pnt * (GRID_MAX_POINTS_X); // now we have the right number of pixels to make both
y_map_pixels = pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y); // directions fit nicely
right_edge = pixels_per_x_mesh_pnt * (GRID_MAX_POINTS_X) + 1; // find location of right edge within the character cell
bottom_line= pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y) + 1; // find location of bottome line within the character cell
n_rows = bottom_line / (ULTRA_Y_PIXELS_PER_CHAR) + 1;
n_cols = right_edge / (ULTRA_X_PIXELS_PER_CHAR) + 1;
for (i = 0; i < n_cols; i++) {
lcd_moveto(i, 0);
lcd_put_wchar((char)0x00); // top line of the box
lcd_moveto(i, n_rows - 1);
lcd_put_wchar(0x01); // bottom line of the box
}
for (j = 0; j < n_rows; j++) {
lcd_moveto(0, j);
lcd_put_wchar(0x02); // Left edge of the box
lcd_moveto(n_cols - 1, j);
lcd_put_wchar(0x03); // right edge of the box
}
/**
* If the entire 4th row is not in use, do not put vertical bars all the way down to the bottom of the display
*/
k = pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y) + 2;
l = (ULTRA_Y_PIXELS_PER_CHAR) * n_rows;
if (l > k && l - k >= (ULTRA_Y_PIXELS_PER_CHAR) / 2) {
lcd_moveto(0, n_rows - 1); // left edge of the box
lcd_put_wchar(' ');
lcd_moveto(n_cols - 1, n_rows - 1); // right edge of the box
lcd_put_wchar(' ');
}
clear_custom_char(&new_char);
new_char.custom_char_bits[0] = 0b11111U; // char #0 is used for the top line of the box
lcd.createChar(0, (uint8_t*)&new_char);
clear_custom_char(&new_char);
k = (GRID_MAX_POINTS_Y) * pixels_per_y_mesh_pnt + 1; // row of pixels for the bottom box line
l = k % (ULTRA_Y_PIXELS_PER_CHAR); // row within relevant character cell
new_char.custom_char_bits[l] = 0b11111U; // char #1 is used for the bottom line of the box
lcd.createChar(1, (uint8_t*)&new_char);
clear_custom_char(&new_char);
for (j = 0; j < ULTRA_Y_PIXELS_PER_CHAR; j++)
new_char.custom_char_bits[j] = 0b10000U; // char #2 is used for the left edge of the box
lcd.createChar(2, (uint8_t*)&new_char);
clear_custom_char(&new_char);
m = (GRID_MAX_POINTS_X) * pixels_per_x_mesh_pnt + 1; // Column of pixels for the right box line
n = m % (ULTRA_X_PIXELS_PER_CHAR); // Column within relevant character cell
i = ULTRA_X_PIXELS_PER_CHAR - 1 - n; // Column within relevant character cell (0 on the right)
for (j = 0; j < ULTRA_Y_PIXELS_PER_CHAR; j++)
new_char.custom_char_bits[j] = (uint8_t)_BV(i); // Char #3 is used for the right edge of the box
lcd.createChar(3, (uint8_t*)&new_char);
i = x * pixels_per_x_mesh_pnt - suppress_x_offset;
j = y * pixels_per_y_mesh_pnt - suppress_y_offset;
upper_left = pixel_location(i, j);
k = (x + 1) * pixels_per_x_mesh_pnt - 1 - suppress_x_offset;
l = (y + 1) * pixels_per_y_mesh_pnt - 1 - suppress_y_offset;
lower_right = pixel_location(k, l);
bottom_right_corner = pixel_location(x_map_pixels, y_map_pixels);
/**
* First, handle the simple case where everything is within a single character cell.
* If part of the Mesh Plot is outside of this character cell, we will follow up
* and deal with that next.
*/
//dump_custom_char("at entry:", &new_char);
clear_custom_char(&new_char);
const uint8_t ypix = MIN(upper_left.y_pixel_offset + pixels_per_y_mesh_pnt, ULTRA_Y_PIXELS_PER_CHAR);
for (j = upper_left.y_pixel_offset; j < ypix; j++) {
i = upper_left.x_pixel_mask;
for (k = 0; k < pixels_per_x_mesh_pnt; k++) {
new_char.custom_char_bits[j] |= i;
i >>= 1;
}
}
//dump_custom_char("after loops:", &new_char);
add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, TOP_LEFT);
//dump_custom_char("after add edges", &new_char);
lcd.createChar(4, (uint8_t*)&new_char);
lcd_moveto(upper_left.column, upper_left.row);
lcd_put_wchar(0x04);
//dump_custom_char("after lcd update:", &new_char);
/**
* Next, check for two side by side character cells being used to display the Mesh Point
* If found... do the right hand character cell next.
*/
if (upper_left.column == lower_right.column - 1) {
l = upper_left.x_pixel_offset;
clear_custom_char(&new_char);
for (j = upper_left.y_pixel_offset; j < ypix; j++) {
i = _BV(ULTRA_X_PIXELS_PER_CHAR - 1); // Fill in the left side of the right character cell
for (k = 0; k < pixels_per_x_mesh_pnt - 1 - l; k++) {
new_char.custom_char_bits[j] |= i;
i >>= 1;
}
}
add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, TOP_RIGHT);
lcd.createChar(5, (uint8_t *) &new_char);
lcd_moveto(lower_right.column, upper_left.row);
lcd_put_wchar(0x05);
}
/**
* Next, check for two character cells stacked on top of each other being used to display the Mesh Point
*/
if (upper_left.row == lower_right.row - 1) {
l = ULTRA_Y_PIXELS_PER_CHAR - upper_left.y_pixel_offset; // Number of pixel rows in top character cell
k = pixels_per_y_mesh_pnt - l; // Number of pixel rows in bottom character cell
clear_custom_char(&new_char);
for (j = 0; j < k; j++) {
i = upper_left.x_pixel_mask;
for (m = 0; m < pixels_per_x_mesh_pnt; m++) { // Fill in the top side of the bottom character cell
new_char.custom_char_bits[j] |= i;
if (!(i >>= 1)) break;
}
}
add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, LOWER_LEFT);
lcd.createChar(6, (uint8_t *) &new_char);
lcd_moveto(upper_left.column, lower_right.row);
lcd_put_wchar(0x06);
}
/**
* Next, check for four character cells being used to display the Mesh Point. If that is
* what is here, we work to fill in the character cell that is down one and to the right one
* from the upper_left character cell.
*/
if (upper_left.column == lower_right.column - 1 && upper_left.row == lower_right.row - 1) {
l = ULTRA_Y_PIXELS_PER_CHAR - upper_left.y_pixel_offset; // Number of pixel rows in top character cell
k = pixels_per_y_mesh_pnt - l; // Number of pixel rows in bottom character cell
clear_custom_char(&new_char);
for (j = 0; j < k; j++) {
l = upper_left.x_pixel_offset;
i = _BV(ULTRA_X_PIXELS_PER_CHAR - 1); // Fill in the left side of the right character cell
for (m = 0; m < pixels_per_x_mesh_pnt - 1 - l; m++) { // Fill in the top side of the bottom character cell
new_char.custom_char_bits[j] |= i;
i >>= 1;
}
}
add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, LOWER_RIGHT);
lcd.createChar(7, (uint8_t*)&new_char);
lcd_moveto(lower_right.column, lower_right.row);
lcd_put_wchar(0x07);
}
#endif
/**
* Print plot position
*/
lcd_moveto(_LCD_W_POS, 0);
lcd_put_wchar('(');
lcd_put_u8str(itostr3(x));
lcd_put_wchar(',');
lcd_put_u8str(itostr3(inverted_y));
lcd_put_wchar(')');
2017-07-02 01:37:33 +02:00
#if LCD_HEIGHT <= 3 // 16x2 or 20x2 display
/**
* Print Z values
*/
_ZLABEL(_LCD_W_POS, 1);
if (!isnan(ubl.z_values[x][inverted_y]))
lcd_put_u8str(ftostr43sign(ubl.z_values[x][inverted_y]));
else
lcd_put_u8str_P(PSTR(" -----"));
#else // 16x4 or 20x4 display
/**
* Show all values at right of screen
*/
_XLABEL(_LCD_W_POS, 1);
2018-05-01 14:08:47 +02:00
lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x]))));
_YLABEL(_LCD_W_POS, 2);
2018-05-01 14:08:47 +02:00
lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y]))));
/**
* Show the location value
*/
_ZLABEL(_LCD_W_POS, 3);
if (!isnan(ubl.z_values[x][inverted_y]))
lcd_put_u8str(ftostr43sign(ubl.z_values[x][inverted_y]));
else
lcd_put_u8str_P(PSTR(" -----"));
#endif // LCD_HEIGHT > 3
}
void add_edges_to_custom_char(custom_char * const custom, coordinate * const ul, coordinate * const lr, coordinate * const brc, uint8_t cell_location) {
uint8_t i, k;
int16_t n_rows = lr->row - ul->row + 1,
n_cols = lr->column - ul->column + 1;
2017-07-02 01:37:33 +02:00
/**
* Check if Top line of box needs to be filled in
2017-07-02 01:37:33 +02:00
*/
if (ul->row == 0 && ((cell_location & TOP_LEFT) || (cell_location & TOP_RIGHT))) { // Only fill in the top line for the top character cells
if (n_cols == 1) {
if (ul->column != brc->column)
custom->custom_char_bits[0] = 0xFF; // Single column in middle
else
for (i = brc->x_pixel_offset; i < ULTRA_X_PIXELS_PER_CHAR; i++) // Single column on right side
SBI(custom->custom_char_bits[0], i);
}
else if ((cell_location & TOP_LEFT) || lr->column != brc->column) // Multiple column in the middle or with right cell in middle
custom->custom_char_bits[0] = 0xFF;
else
for (i = brc->x_pixel_offset; i < ULTRA_X_PIXELS_PER_CHAR; i++)
SBI(custom->custom_char_bits[0], i);
}
2017-07-02 01:37:33 +02:00
/**
* Check if left line of box needs to be filled in
2017-07-02 01:37:33 +02:00
*/
if ((cell_location & TOP_LEFT) || (cell_location & LOWER_LEFT)) {
if (ul->column == 0) { // Left column of characters on LCD Display
k = ul->row == brc->row ? brc->y_pixel_offset : ULTRA_Y_PIXELS_PER_CHAR; // If it isn't the last row... do the full character cell
for (i = 0; i < k; i++)
SBI(custom->custom_char_bits[i], ULTRA_X_PIXELS_PER_CHAR - 1);
}
}
/**
* Check if bottom line of box needs to be filled in
*/
// Single row of mesh plot cells
if (n_rows == 1 /* && (cell_location == TOP_LEFT || cell_location == TOP_RIGHT) */ && ul->row == brc->row) {
if (n_cols == 1) // Single row, single column case
k = ul->column == brc->column ? brc->x_pixel_mask : 0x01;
else if (cell_location & TOP_RIGHT) // Single row, multiple column case
k = lr->column == brc->column ? brc->x_pixel_mask : 0x01;
else // Single row, left of multiple columns
k = 0x01;
while (k < _BV(ULTRA_X_PIXELS_PER_CHAR)) {
custom->custom_char_bits[brc->y_pixel_offset] |= k;
k <<= 1;
}
}
// Double row of characters on LCD Display
// And this is a bottom custom character
if (n_rows == 2 && (cell_location == LOWER_LEFT || cell_location == LOWER_RIGHT) && lr->row == brc->row) {
if (n_cols == 1) // Double row, single column case
k = ul->column == brc->column ? brc->x_pixel_mask : 0x01;
else if (cell_location & LOWER_RIGHT) // Double row, multiple column case
k = lr->column == brc->column ? brc->x_pixel_mask : 0x01;
else // Double row, left of multiple columns
k = 0x01;
while (k < _BV(ULTRA_X_PIXELS_PER_CHAR)) {
custom->custom_char_bits[brc->y_pixel_offset] |= k;
k <<= 1;
}
}
/**
* Check if right line of box needs to be filled in
*/
// Nothing to do if the lower right part of the mesh pnt isn't in the same column as the box line
if (lr->column == brc->column) {
// This mesh point is in the same character cell as the right box line
if (ul->column == brc->column || (cell_location & TOP_RIGHT) || (cell_location & LOWER_RIGHT)) {
// If not the last row... do the full character cell
k = ul->row == brc->row ? brc->y_pixel_offset : ULTRA_Y_PIXELS_PER_CHAR;
for (i = 0; i < k; i++) custom->custom_char_bits[i] |= brc->x_pixel_mask;
}
}
}
#endif // AUTO_BED_LEVELING_UBL
#endif // ULTIPANEL
#endif // ULTRALCD_IMPL_HD44780_H