Firmware2/Marlin/language_gl.h

252 lines
14 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2015-09-30 16:22:42 +02:00
/**
* Galician language (ISO "gl")
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
2015-09-30 16:22:42 +02:00
*
*/
#ifndef LANGUAGE_GL_H
#define LANGUAGE_GL_H
#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1
2016-12-12 16:18:53 +01:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" lista.")
#define MSG_SD_INSERTED _UxGT("Tarxeta inserida")
#define MSG_SD_REMOVED _UxGT("Tarxeta retirada")
#define MSG_LCD_ENDSTOPS _UxGT("FinCarro")
#define MSG_MAIN _UxGT("Menu principal")
#define MSG_AUTOSTART _UxGT("Autoarranque")
#define MSG_DISABLE_STEPPERS _UxGT("Apagar motores")
#define MSG_AUTO_HOME _UxGT("Ir a orixe")
#define MSG_AUTO_HOME_X _UxGT("Ir orixe X")
#define MSG_AUTO_HOME_Y _UxGT("Ir orixe Y")
#define MSG_AUTO_HOME_Z _UxGT("Ir orixe Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Ir orixes XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Prema pulsador")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Seguinte punto")
#define MSG_LEVEL_BED_DONE _UxGT("Nivelado feito")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancelar")
#define MSG_SET_HOME_OFFSETS _UxGT("Offsets na orixe")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets fixados")
#define MSG_SET_ORIGIN _UxGT("Fixar orixe")
#define MSG_PREHEAT_1 _UxGT("Prequentar PLA")
#define MSG_PREHEAT_1_N _UxGT("Prequentar PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Preque. PLA Todo")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. PLA Cama")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. PLA conf")
#define MSG_PREHEAT_2 _UxGT("Prequentar ABS")
#define MSG_PREHEAT_2_N _UxGT("Prequentar ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Preque. ABS Todo")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. ABS Cama")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. ABS conf")
#define MSG_COOLDOWN _UxGT("Arrefriar")
#define MSG_SWITCH_PS_ON _UxGT("Acender")
#define MSG_SWITCH_PS_OFF _UxGT("Apagar")
#define MSG_EXTRUDE _UxGT("Extrudir")
#define MSG_RETRACT _UxGT("Retraer")
#define MSG_MOVE_AXIS _UxGT("Mover eixe")
#define MSG_LEVEL_BED _UxGT("Nivelar cama")
#define MSG_MOVE_X _UxGT("Mover X")
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")
#define MSG_SPEED _UxGT("Velocidade")
#define MSG_BED_Z _UxGT("Cama Z")
#define MSG_NOZZLE _UxGT("Bico")
#define MSG_BED _UxGT("Cama")
#define MSG_FAN_SPEED _UxGT("Velocidade vent.")
#define MSG_FLOW _UxGT("Fluxo")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Escolla")
#define MSG_ACC _UxGT("Acel")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_XSTEPS _UxGT("Xpasos/mm")
#define MSG_YSTEPS _UxGT("Ypasos/mm")
#define MSG_ZSTEPS _UxGT("Zpasos/mm")
#define MSG_ESTEPS _UxGT("Epasos/mm")
#define MSG_E1STEPS _UxGT("E1pasos/mm")
#define MSG_E2STEPS _UxGT("E2pasos/mm")
#define MSG_E3STEPS _UxGT("E3pasos/mm")
#define MSG_E4STEPS _UxGT("E4pasos/mm")
2017-04-09 10:23:05 +02:00
#define MSG_E5STEPS _UxGT("E5pasos/mm")
2016-12-12 16:18:53 +01:00
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movemento")
2017-04-17 06:00:08 +02:00
#define MSG_FILAMENT _UxGT("Filamento")
2016-12-12 16:18:53 +01:00
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.")
#define MSG_CONTRAST _UxGT("Constraste LCD")
#define MSG_STORE_EEPROM _UxGT("Gardar en memo.")
#define MSG_LOAD_EEPROM _UxGT("Cargar de memo.")
2016-12-12 16:18:53 +01:00
#define MSG_RESTORE_FAILSAFE _UxGT("Cargar de firm.")
#define MSG_REFRESH _UxGT("Volver a cargar")
#define MSG_WATCH _UxGT("Monitorizacion")
#define MSG_PREPARE _UxGT("Preparar")
#define MSG_TUNE _UxGT("Axustar")
#define MSG_PAUSE_PRINT _UxGT("Pausar impres.")
#define MSG_RESUME_PRINT _UxGT("Seguir impres.")
#define MSG_STOP_PRINT _UxGT("Deter impres.")
#define MSG_CARD_MENU _UxGT("Tarxeta SD")
#define MSG_NO_CARD _UxGT("Sen tarxeta SD")
#define MSG_DWELL _UxGT("En repouso...")
#define MSG_USERWAIT _UxGT("A espera...")
#define MSG_RESUMING _UxGT("Imprimindo...")
#define MSG_PRINT_ABORTED _UxGT("Impre. cancelada")
#define MSG_NO_MOVE _UxGT("Sen movemento.")
#define MSG_KILLED _UxGT("PROGRAMA MORTO")
#define MSG_STOPPED _UxGT("PROGRAMA PARADO")
#define MSG_CONTROL_RETRACT _UxGT("Retraccion mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Cambio retra. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retraccion V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Alzar Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Recup. retra. mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Cambio recup. mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Recuperacion V")
#define MSG_AUTORETRACT _UxGT("Retraccion auto.")
#define MSG_FILAMENTCHANGE _UxGT("Cambiar filamen.")
#define MSG_INIT_SDCARD _UxGT("Iniciando SD")
#define MSG_CNG_SDCARD _UxGT("Cambiar SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda-Z sen cama")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_BLTOUCH_SELFTEST _UxGT("Comprobar BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Iniciar BLTouch")
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
#define MSG_BABYSTEP_Z _UxGT("Micropaso Z")
#define MSG_ENDSTOP_ABORT _UxGT("Erro fin carro")
#define MSG_HEATING_FAILED_LCD _UxGT("Fallo quentando")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Erro temperatura")
#define MSG_THERMAL_RUNAWAY _UxGT("Temp. excesiva")
#define MSG_ERR_MAXTEMP _UxGT("Err: temp. max.")
#define MSG_ERR_MINTEMP _UxGT("Err: temp. min.")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z impedido")
#define MSG_HALTED _UxGT("SISTEMA MORTO")
#define MSG_PLEASE_RESET _UxGT("Debe reiniciar!")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Quentando...")
#define MSG_HEATING_COMPLETE _UxGT("Xa esta quente")
#define MSG_BED_HEATING _UxGT("Quentando cama")
#define MSG_BED_DONE _UxGT("Cama esta quente")
#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro")
#define MSG_INFO_MENU _UxGT("Acerca de...")
#define MSG_INFO_PRINTER_MENU _UxGT("Informacion")
#define MSG_INFO_STATS_MENU _UxGT("Estadisticas")
#define MSG_INFO_BOARD_MENU _UxGT("Placa nai")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistores")
#define MSG_INFO_EXTRUDERS _UxGT("Extrusores")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Acender a luz")
#define MSG_LIGHTS_OFF _UxGT("Apagar a luz")
2016-11-18 05:17:14 +01:00
#if LCD_WIDTH >= 20
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Total traballos")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Total completos")
#define MSG_INFO_PRINT_TIME _UxGT("Tempo impresion")
#define MSG_INFO_PRINT_LONGEST _UxGT("Traballo +longo")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total extruido")
2016-08-03 15:00:18 +02:00
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Traballos")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completos")
#define MSG_INFO_PRINT_TIME _UxGT("Tempo")
#define MSG_INFO_PRINT_LONGEST _UxGT("O +longo")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruido")
2016-08-03 15:00:18 +02:00
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Fonte alime.")
#define MSG_DRIVE_STRENGTH _UxGT("Potencia motor")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Garda DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mais")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo")
2016-08-03 15:00:18 +02:00
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar troco")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filamento")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("descarga do")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza o")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("faga click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion do")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo")
2016-08-03 15:00:18 +02:00
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruindo...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...")
2016-08-03 15:00:18 +02:00
#endif // LCD_HEIGHT < 4
2015-09-30 16:22:42 +02:00
#endif // LANGUAGE_GL_H
2016-08-03 15:00:18 +02:00