Firmware2/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h

92 lines
3.1 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Endstop interrupts for Libmaple STM32F1 based targets.
*
* On STM32F, all pins support external interrupt capability.
* Any pin can be used for external interrupts, but there are some restrictions.
* At most 16 different external interrupts can be used at one time.
* Further, you cant just pick any 16 pins to use. This is because every pin on the STM32
* connects to what is called an EXTI line, and only one pin per EXTI line can be used for external interrupts at a time
* Check the Reference Manual of the MCU to confirm which line is used by each pin
*/
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the stepper-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#ifndef _ENDSTOP_INTERRUPTS_H_
#define _ENDSTOP_INTERRUPTS_H_
void setup_endstop_interrupts(void) {
#if HAS_X_MAX
SET_INPUT(X_MAX_PIN);
attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE); // assign it
#endif
#if HAS_X_MIN
SET_INPUT(X_MIN_PIN);
attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MAX
SET_INPUT(Y_MAX_PIN);
attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MIN
SET_INPUT(Y_MIN_PIN);
attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MAX
SET_INPUT(Z_MAX_PIN);
attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN
SET_INPUT(Z_MIN_PIN);
attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MAX
SET_INPUT(Z2_MAX_PIN);
attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MIN
SET_INPUT(Z2_MIN_PIN);
attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN_PROBE_PIN
SET_INPUT(Z_MIN_PROBE_PIN);
attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
#endif
}
#endif //_ENDSTOP_INTERRUPTS_H_