Firmware2/Marlin/src/inc/Conditionals_adv.h

1135 lines
35 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Conditionals_adv.h
2022-02-13 20:12:38 +01:00
* Conditionals set before pins.h and which depend on Configuration_adv.h.
*/
#ifndef AXIS_RELATIVE_MODES
#define AXIS_RELATIVE_MODES {}
#endif
#ifdef SWITCHING_NOZZLE_E1_SERVO_NR
#define SWITCHING_NOZZLE_TWO_SERVOS 1
#endif
// Determine NUM_SERVOS if none was supplied
#ifndef NUM_SERVOS
#define NUM_SERVOS 0
2020-10-31 23:42:05 +01:00
#if ANY(HAS_Z_SERVO_PROBE, CHAMBER_VENT, SWITCHING_TOOLHEAD, SWITCHING_EXTRUDER, SWITCHING_NOZZLE, SPINDLE_SERVO)
#if NUM_SERVOS <= Z_PROBE_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= CHAMBER_VENT_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (CHAMBER_VENT_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= SWITCHING_TOOLHEAD_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SWITCHING_TOOLHEAD_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= SWITCHING_NOZZLE_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SWITCHING_NOZZLE_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= SWITCHING_NOZZLE_E1_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SWITCHING_NOZZLE_E1_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= SWITCHING_EXTRUDER_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SWITCHING_EXTRUDER_SERVO_NR + 1)
#endif
#if NUM_SERVOS <= SWITCHING_EXTRUDER_E23_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SWITCHING_EXTRUDER_E23_SERVO_NR + 1)
#endif
2020-10-31 23:42:05 +01:00
#if NUM_SERVOS <= SPINDLE_SERVO_NR
#undef NUM_SERVOS
#define NUM_SERVOS (SPINDLE_SERVO_NR + 1)
#endif
#endif
#endif
// Convenience override for a BLTouch alone
#if ENABLED(BLTOUCH) && NUM_SERVOS == 1
#undef SERVO_DELAY
#define SERVO_DELAY { 50 }
#endif
#if !HAS_STOWABLE_PROBE
#undef PROBE_DEPLOY_STOW_MENU
#endif
2021-05-21 15:23:09 +02:00
#if !HAS_EXTRUDERS
2019-09-10 09:20:49 +02:00
#define NO_VOLUMETRICS
#undef TEMP_SENSOR_0
#undef TEMP_SENSOR_1
#undef TEMP_SENSOR_2
#undef TEMP_SENSOR_3
#undef TEMP_SENSOR_4
#undef TEMP_SENSOR_5
#undef TEMP_SENSOR_6
#undef TEMP_SENSOR_7
2019-09-10 09:20:49 +02:00
#undef FWRETRACT
#undef PIDTEMP
#undef AUTOTEMP
#undef PID_EXTRUSION_SCALING
#undef LIN_ADVANCE
#undef FILAMENT_RUNOUT_SENSOR
#undef ADVANCED_PAUSE_FEATURE
#undef FILAMENT_RUNOUT_DISTANCE_MM
#undef FILAMENT_LOAD_UNLOAD_GCODES
#undef DISABLE_INACTIVE_EXTRUDER
#undef FILAMENT_LOAD_UNLOAD_GCODES
#undef EXTRUDER_RUNOUT_PREVENT
#undef PREVENT_COLD_EXTRUSION
#undef PREVENT_LENGTHY_EXTRUDE
#undef THERMAL_PROTECTION_HOTENDS
#undef THERMAL_PROTECTION_PERIOD
#undef WATCH_TEMP_PERIOD
#undef SHOW_TEMP_ADC_VALUES
#undef LCD_SHOW_E_TOTAL
#undef MANUAL_E_MOVES_RELATIVE
#undef STEALTHCHOP_E
2019-09-10 09:20:49 +02:00
#endif
2022-08-04 09:38:15 +02:00
#if HOTENDS <= 7
#undef E7_AUTO_FAN_PIN
#if HOTENDS <= 6
#undef E6_AUTO_FAN_PIN
#if HOTENDS <= 5
#undef E5_AUTO_FAN_PIN
#if HOTENDS <= 4
#undef E4_AUTO_FAN_PIN
#if HOTENDS <= 3
#undef E3_AUTO_FAN_PIN
#if HOTENDS <= 2
#undef E2_AUTO_FAN_PIN
#if HOTENDS <= 1
#undef E1_AUTO_FAN_PIN
#if HOTENDS == 0
#undef E0_AUTO_FAN_PIN
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
/**
* Temperature Sensors; define what sensor(s) we have.
*/
// Temperature sensor IDs
#define HID_REDUNDANT -6
#define HID_BOARD -5
#define HID_COOLER -4
#define HID_PROBE -3
#define HID_CHAMBER -2
#define HID_BED -1
#define HID_E0 0
#define HID_E1 1
#define HID_E2 2
#define HID_E3 3
#define HID_E4 4
#define HID_E5 5
#define HID_E6 6
#define HID_E7 7
#define _SENSOR_IS(I,N) || (TEMP_SENSOR(N) == I)
2021-10-18 08:49:35 +02:00
#define _E_SENSOR_IS(I,N) _SENSOR_IS(N,I)
#define ANY_E_SENSOR_IS(N) (0 REPEAT2(HOTENDS, _E_SENSOR_IS, N))
#define ANY_THERMISTOR_IS(N) ( ANY_E_SENSOR_IS(N) \
2021-10-18 08:49:35 +02:00
_SENSOR_IS(N,BED) _SENSOR_IS(N,PROBE) _SENSOR_IS(N,CHAMBER) \
_SENSOR_IS(N,COOLER) _SENSOR_IS(N,BOARD) _SENSOR_IS(N,REDUNDANT) )
#if ANY_THERMISTOR_IS(1000)
#define HAS_USER_THERMISTORS 1
#endif
#if TEMP_SENSOR_REDUNDANT
#define _HEATER_ID(M) HID_##M
#define HEATER_ID(M) _HEATER_ID(M)
#define REDUNDANT_TEMP_MATCH(M,N) (HEATER_ID(TEMP_SENSOR_REDUNDANT_##M) == _HEATER_ID(N))
#else
#define REDUNDANT_TEMP_MATCH(...) 0
#endif
2022-08-04 09:38:15 +02:00
#if TEMP_SENSOR_IS_MAX_TC(0)
#if TEMP_SENSOR_0 == -5
#define TEMP_SENSOR_0_IS_MAX31865 1
#define TEMP_SENSOR_0_MAX_TC_TMIN 0
#define TEMP_SENSOR_0_MAX_TC_TMAX 1024
#ifndef MAX31865_SENSOR_WIRES_0
#define MAX31865_SENSOR_WIRES_0 2
#endif
#ifndef MAX31865_WIRE_OHMS_0
#define MAX31865_WIRE_OHMS_0 0.0f
#endif
#elif TEMP_SENSOR_0 == -3
#define TEMP_SENSOR_0_IS_MAX31855 1
#define TEMP_SENSOR_0_MAX_TC_TMIN -270
#define TEMP_SENSOR_0_MAX_TC_TMAX 1800
#elif TEMP_SENSOR_0 == -2
#define TEMP_SENSOR_0_IS_MAX6675 1
#define TEMP_SENSOR_0_MAX_TC_TMIN 0
#define TEMP_SENSOR_0_MAX_TC_TMAX 1024
#endif
#elif TEMP_SENSOR_0 == -4
#define TEMP_SENSOR_0_IS_AD8495 1
#elif TEMP_SENSOR_0 == -1
#define TEMP_SENSOR_0_IS_AD595 1
#elif TEMP_SENSOR_0 > 0
#define TEMP_SENSOR_0_IS_THERMISTOR 1
#if TEMP_SENSOR_0 == 1000
#define TEMP_SENSOR_0_IS_CUSTOM 1
#elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999
#define TEMP_SENSOR_0_IS_DUMMY 1
#endif
#else
#undef HEATER_0_MINTEMP
#undef HEATER_0_MAXTEMP
#endif
2022-08-04 09:38:15 +02:00
#if TEMP_SENSOR_IS_MAX_TC(1)
#if TEMP_SENSOR_1 == -5
#define TEMP_SENSOR_1_IS_MAX31865 1
#define TEMP_SENSOR_1_MAX_TC_TMIN 0
#define TEMP_SENSOR_1_MAX_TC_TMAX 1024
#ifndef MAX31865_SENSOR_WIRES_1
#define MAX31865_SENSOR_WIRES_1 2
#endif
#ifndef MAX31865_WIRE_OHMS_1
#define MAX31865_WIRE_OHMS_1 0.0f
#endif
#elif TEMP_SENSOR_1 == -3
#define TEMP_SENSOR_1_IS_MAX31855 1
#define TEMP_SENSOR_1_MAX_TC_TMIN -270
#define TEMP_SENSOR_1_MAX_TC_TMAX 1800
#elif TEMP_SENSOR_1 == -2
#define TEMP_SENSOR_1_IS_MAX6675 1
#define TEMP_SENSOR_1_MAX_TC_TMIN 0
#define TEMP_SENSOR_1_MAX_TC_TMAX 1024
#endif
#if TEMP_SENSOR_1 != TEMP_SENSOR_0
#if TEMP_SENSOR_1 == -5
#error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match."
#elif TEMP_SENSOR_1 == -3
#error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match."
#elif TEMP_SENSOR_1 == -2
#error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match."
#endif
#endif
#elif TEMP_SENSOR_1 == -4
#define TEMP_SENSOR_1_IS_AD8495 1
#elif TEMP_SENSOR_1 == -1
#define TEMP_SENSOR_1_IS_AD595 1
#elif TEMP_SENSOR_1 > 0
#define TEMP_SENSOR_1_IS_THERMISTOR 1
#if TEMP_SENSOR_1 == 1000
#define TEMP_SENSOR_1_IS_CUSTOM 1
#elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999
#define TEMP_SENSOR_1_IS_DUMMY 1
#endif
#else
#undef HEATER_1_MINTEMP
#undef HEATER_1_MAXTEMP
#endif
#if TEMP_SENSOR_IS_MAX_TC(2)
#if TEMP_SENSOR_2 == -5
#define TEMP_SENSOR_2_IS_MAX31865 1
#define TEMP_SENSOR_2_MAX_TC_TMIN 0
#define TEMP_SENSOR_2_MAX_TC_TMAX 1024
#ifndef MAX31865_SENSOR_WIRES_2
#define MAX31865_SENSOR_WIRES_2 2
#endif
#ifndef MAX31865_WIRE_OHMS_2
#define MAX31865_WIRE_OHMS_2 0.0f
#endif
#elif TEMP_SENSOR_2 == -3
#define TEMP_SENSOR_2_IS_MAX31855 1
#define TEMP_SENSOR_2_MAX_TC_TMIN -270
#define TEMP_SENSOR_2_MAX_TC_TMAX 1800
#elif TEMP_SENSOR_2 == -2
#define TEMP_SENSOR_2_IS_MAX6675 1
#define TEMP_SENSOR_2_MAX_TC_TMIN 0
#define TEMP_SENSOR_2_MAX_TC_TMAX 1024
#endif
#if TEMP_SENSOR_2 != TEMP_SENSOR_0
#if TEMP_SENSOR_2 == -5
#error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_2 then TEMP_SENSOR_0 must match."
#elif TEMP_SENSOR_2 == -3
#error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_2 then TEMP_SENSOR_0 must match."
#elif TEMP_SENSOR_2 == -2
#error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_2 then TEMP_SENSOR_0 must match."
#endif
#endif
#elif TEMP_SENSOR_2 == -4
#define TEMP_SENSOR_2_IS_AD8495 1
#elif TEMP_SENSOR_2 == -1
#define TEMP_SENSOR_2_IS_AD595 1
#elif TEMP_SENSOR_2 > 0
#define TEMP_SENSOR_2_IS_THERMISTOR 1
#if TEMP_SENSOR_2 == 1000
#define TEMP_SENSOR_2_IS_CUSTOM 1
#elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999
#define TEMP_SENSOR_2_IS_DUMMY 1
#endif
#else
#undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP
#endif
2022-08-04 09:38:15 +02:00
#if TEMP_SENSOR_IS_MAX_TC(REDUNDANT)
#if TEMP_SENSOR_REDUNDANT == -5
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) && !REDUNDANT_TEMP_MATCH(SOURCE, E2)
#error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 (0/1/2)."
#endif
#define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024
#elif TEMP_SENSOR_REDUNDANT == -3
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) && !REDUNDANT_TEMP_MATCH(SOURCE, E2)
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 (0/1/2)."
#endif
#define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800
#elif TEMP_SENSOR_REDUNDANT == -2
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) && !REDUNDANT_TEMP_MATCH(SOURCE, E2)
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 (0/1/2)."
#endif
#define TEMP_SENSOR_REDUNDANT_IS_MAX6675 1
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024
#endif
// mimic setting up the source TEMP_SENSOR
#if REDUNDANT_TEMP_MATCH(SOURCE, E0)
#define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
#define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
#ifndef MAX31865_SENSOR_WIRES_0
#define MAX31865_SENSOR_WIRES_0 2
#endif
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
#define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
#define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
#ifndef MAX31865_SENSOR_WIRES_1
#define MAX31865_SENSOR_WIRES_1 2
#endif
#elif REDUNDANT_TEMP_MATCH(SOURCE, E2)
#define TEMP_SENSOR_2_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
#define TEMP_SENSOR_2_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
#ifndef MAX31865_SENSOR_WIRES_2
#define MAX31865_SENSOR_WIRES_2 2
#endif
#endif
#if (TEMP_SENSOR_IS_MAX_TC(0) && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_0) || (TEMP_SENSOR_IS_MAX_TC(1) && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_1) || (TEMP_SENSOR_IS_MAX_TC(2) && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_2)
#if TEMP_SENSOR_REDUNDANT == -5
#error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 then TEMP_SENSOR_REDUNDANT must match."
#elif TEMP_SENSOR_REDUNDANT == -3
#error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 then TEMP_SENSOR_REDUNDANT must match."
#elif TEMP_SENSOR_REDUNDANT == -2
#error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_0/TEMP_SENSOR_1/TEMP_SENSOR_2 then TEMP_SENSOR_REDUNDANT must match."
#endif
#endif
#elif TEMP_SENSOR_REDUNDANT == -4
#define TEMP_SENSOR_REDUNDANT_IS_AD8495 1
#elif TEMP_SENSOR_REDUNDANT == -1
#define TEMP_SENSOR_REDUNDANT_IS_AD595 1
#elif TEMP_SENSOR_REDUNDANT > 0
#define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1
#if TEMP_SENSOR_REDUNDANT == 1000
#define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1
#elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999
#error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT."
#endif
#endif
#if TEMP_SENSOR_IS_MAX_TC(0) || TEMP_SENSOR_IS_MAX_TC(1) || TEMP_SENSOR_IS_MAX_TC(2) || TEMP_SENSOR_IS_MAX_TC(REDUNDANT)
#define HAS_MAX_TC 1
#endif
#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 || TEMP_SENSOR_2_IS_MAX6675 || TEMP_SENSOR_REDUNDANT_IS_MAX6675
#define HAS_MAX6675 1
#endif
#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 || TEMP_SENSOR_2_IS_MAX31855 || TEMP_SENSOR_REDUNDANT_IS_MAX31855
#define HAS_MAX31855 1
#endif
#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 || TEMP_SENSOR_2_IS_MAX31865 || TEMP_SENSOR_REDUNDANT_IS_MAX31865
#define HAS_MAX31865 1
#endif
#if TEMP_SENSOR_3 == -4
#define TEMP_SENSOR_3_IS_AD8495 1
#elif TEMP_SENSOR_3 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3."
#elif TEMP_SENSOR_3 == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3."
#elif TEMP_SENSOR_3 == -1
#define TEMP_SENSOR_3_IS_AD595 1
#elif TEMP_SENSOR_3 > 0
#define TEMP_SENSOR_3_IS_THERMISTOR 1
#if TEMP_SENSOR_3 == 1000
#define TEMP_SENSOR_3_IS_CUSTOM 1
#elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999
#define TEMP_SENSOR_3_IS_DUMMY 1
#endif
#else
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_4 == -4
#define TEMP_SENSOR_4_IS_AD8495 1
#elif TEMP_SENSOR_4 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4."
#elif TEMP_SENSOR_4 == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4."
#elif TEMP_SENSOR_4 == -1
#define TEMP_SENSOR_4_IS_AD595 1
#elif TEMP_SENSOR_4 > 0
#define TEMP_SENSOR_4_IS_THERMISTOR 1
#if TEMP_SENSOR_4 == 1000
#define TEMP_SENSOR_4_IS_CUSTOM 1
#elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999
#define TEMP_SENSOR_4_IS_DUMMY 1
#endif
#else
#undef HEATER_4_MINTEMP
#undef HEATER_4_MAXTEMP
#endif
#if TEMP_SENSOR_5 == -4
#define TEMP_SENSOR_5_IS_AD8495 1
#elif TEMP_SENSOR_5 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5."
#elif TEMP_SENSOR_5 == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5."
#elif TEMP_SENSOR_5 == -1
#define TEMP_SENSOR_5_IS_AD595 1
#elif TEMP_SENSOR_5 > 0
#define TEMP_SENSOR_5_IS_THERMISTOR 1
#if TEMP_SENSOR_5 == 1000
#define TEMP_SENSOR_5_IS_CUSTOM 1
#elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999
#define TEMP_SENSOR_5_IS_DUMMY 1
#endif
#else
#undef HEATER_5_MINTEMP
#undef HEATER_5_MAXTEMP
#endif
#if TEMP_SENSOR_6 == -4
#define TEMP_SENSOR_6_IS_AD8495 1
#elif TEMP_SENSOR_6 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6."
#elif TEMP_SENSOR_6 == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6."
#elif TEMP_SENSOR_6 == -1
#define TEMP_SENSOR_6_IS_AD595 1
#elif TEMP_SENSOR_6 > 0
#define TEMP_SENSOR_6_IS_THERMISTOR 1
#if TEMP_SENSOR_6 == 1000
#define TEMP_SENSOR_6_IS_CUSTOM 1
#elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999
#define TEMP_SENSOR_6_IS_DUMMY 1
#endif
#else
#undef HEATER_6_MINTEMP
#undef HEATER_6_MAXTEMP
#endif
#if TEMP_SENSOR_7 == -4
#define TEMP_SENSOR_7_IS_AD8495 1
#elif TEMP_SENSOR_7 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7."
#elif TEMP_SENSOR_7 == -2
#error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7."
#elif TEMP_SENSOR_7 == -1
#define TEMP_SENSOR_7_IS_AD595 1
#elif TEMP_SENSOR_7 > 0
#define TEMP_SENSOR_7_IS_THERMISTOR 1
#if TEMP_SENSOR_7 == 1000
#define TEMP_SENSOR_7_IS_CUSTOM 1
#elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999
#define TEMP_SENSOR_7_IS_DUMMY 1
#endif
#else
#undef HEATER_7_MINTEMP
#undef HEATER_7_MAXTEMP
#endif
#if TEMP_SENSOR_BED == -4
#define TEMP_SENSOR_BED_IS_AD8495 1
#elif TEMP_SENSOR_BED == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED."
#elif TEMP_SENSOR_BED == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED."
#elif TEMP_SENSOR_BED == -1
#define TEMP_SENSOR_BED_IS_AD595 1
#elif TEMP_SENSOR_BED > 0
#define TEMP_SENSOR_BED_IS_THERMISTOR 1
#if TEMP_SENSOR_BED == 1000
#define TEMP_SENSOR_BED_IS_CUSTOM 1
#elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999
#define TEMP_SENSOR_BED_IS_DUMMY 1
#endif
#else
#undef THERMAL_PROTECTION_BED
#undef THERMAL_PROTECTION_BED_PERIOD
#undef BED_MINTEMP
#undef BED_MAXTEMP
#endif
#if TEMP_SENSOR_CHAMBER == -4
#define TEMP_SENSOR_CHAMBER_IS_AD8495 1
#elif TEMP_SENSOR_CHAMBER == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER."
#elif TEMP_SENSOR_CHAMBER == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER."
#elif TEMP_SENSOR_CHAMBER == -1
#define TEMP_SENSOR_CHAMBER_IS_AD595 1
#elif TEMP_SENSOR_CHAMBER > 0
#define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1
#if TEMP_SENSOR_CHAMBER == 1000
#define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1
#elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999
#define TEMP_SENSOR_CHAMBER_IS_DUMMY 1
#endif
#else
#undef THERMAL_PROTECTION_CHAMBER
#undef CHAMBER_MINTEMP
#undef CHAMBER_MAXTEMP
#endif
#if TEMP_SENSOR_COOLER == -4
#define TEMP_SENSOR_COOLER_IS_AD8495 1
#elif TEMP_SENSOR_COOLER == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER."
#elif TEMP_SENSOR_COOLER == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER."
#elif TEMP_SENSOR_COOLER == -1
#define TEMP_SENSOR_COOLER_IS_AD595 1
#elif TEMP_SENSOR_COOLER > 0
#define TEMP_SENSOR_COOLER_IS_THERMISTOR 1
#if TEMP_SENSOR_COOLER == 1000
#define TEMP_SENSOR_COOLER_IS_CUSTOM 1
#elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999
#define TEMP_SENSOR_COOLER_IS_DUMMY 1
#endif
#else
#undef THERMAL_PROTECTION_COOLER
#undef COOLER_MINTEMP
#undef COOLER_MAXTEMP
#endif
#if TEMP_SENSOR_PROBE == -4
#define TEMP_SENSOR_PROBE_IS_AD8495 1
#elif TEMP_SENSOR_PROBE == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE."
#elif TEMP_SENSOR_PROBE == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE."
#elif TEMP_SENSOR_PROBE == -1
#define TEMP_SENSOR_PROBE_IS_AD595 1
#elif TEMP_SENSOR_PROBE > 0
#define TEMP_SENSOR_PROBE_IS_THERMISTOR 1
#if TEMP_SENSOR_PROBE == 1000
#define TEMP_SENSOR_PROBE_IS_CUSTOM 1
#elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999
#define TEMP_SENSOR_PROBE_IS_DUMMY 1
#endif
#endif
#if TEMP_SENSOR_BOARD == -4
#define TEMP_SENSOR_BOARD_IS_AD8495 1
#elif TEMP_SENSOR_BOARD == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BOARD."
#elif TEMP_SENSOR_BOARD == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BOARD."
#elif TEMP_SENSOR_BOARD == -1
#define TEMP_SENSOR_BOARD_IS_AD595 1
#elif TEMP_SENSOR_BOARD > 0
#define TEMP_SENSOR_BOARD_IS_THERMISTOR 1
#if TEMP_SENSOR_BOARD == 1000
#define TEMP_SENSOR_BOARD_IS_CUSTOM 1
#elif TEMP_SENSOR_BOARD == 998 || TEMP_SENSOR_BOARD == 999
#define TEMP_SENSOR_BOARD_IS_DUMMY 1
#endif
#endif
2020-04-19 09:01:30 +02:00
#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
#define HAS_MIXER_SYNC_CHANNEL 1
#endif
#if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
#define HAS_DUPLICATION_MODE 1
#endif
#if ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
#define HAS_SERVICE_INTERVALS 1
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define HAS_FILAMENT_SENSOR 1
2021-03-01 02:50:17 +01:00
#if NUM_RUNOUT_SENSORS > 1
#define MULTI_FILAMENT_SENSOR 1
#endif
2020-05-06 06:18:23 +02:00
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
#define HAS_FILAMENT_RUNOUT_DISTANCE 1
#endif
#if ENABLED(MIXING_EXTRUDER)
#define WATCH_ALL_RUNOUT_SENSORS
#endif
#endif
#if ANY(PTC_PROBE, PTC_BED, PTC_HOTEND)
#define HAS_PTC 1
#endif
// Let SD_FINISHED_RELEASECOMMAND stand in for SD_FINISHED_STEPPERRELEASE
#if ENABLED(SD_FINISHED_STEPPERRELEASE)
#ifndef SD_FINISHED_RELEASECOMMAND
#define SD_FINISHED_RELEASECOMMAND "M84" // planner.finish_and_disable()
#endif
#else
#undef SD_FINISHED_RELEASECOMMAND
#endif
#if ENABLED(NO_SD_AUTOSTART)
#undef MENU_ADDAUTOSTART
#endif
#if EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
#define HAS_PRINT_PROGRESS 1
#endif
#if DISABLED(SET_PROGRESS_MANUALLY)
#undef SET_REMAINING_TIME
#undef SET_INTERACTION_TIME
#undef M73_REPORT
#endif
#if ANY(HAS_MARLINUI_MENU, ULTIPANEL_FEEDMULTIPLY, SOFT_RESET_ON_KILL)
#define HAS_ENCODER_ACTION 1
#endif
#if STATUS_MESSAGE_TIMEOUT_SEC > 0
#define HAS_STATUS_MESSAGE_TIMEOUT 1
#endif
2020-11-10 01:53:19 +01:00
#if ENABLED(SDSUPPORT) && SD_PROCEDURE_DEPTH
#define HAS_MEDIA_SUBCALLS 1
#endif
#if HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME)
#define HAS_PRINT_PROGRESS_PERMYRIAD 1
#endif
#if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAMES 1
#if MANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAME_MENU 1
#endif
#endif
2020-03-14 05:18:16 +01:00
#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION)
#define HAS_POSITION_MODIFIERS 1
#endif
#if ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
#define HAS_EXTRA_ENDSTOPS 1
#endif
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_SOFTWARE_ENDSTOPS 1
#endif
2021-09-07 06:06:27 +02:00
#if ANY(EXTENSIBLE_UI, IS_NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, HAS_DWIN_E3V2)
#define HAS_RESUME_CONTINUE 1
#endif
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define HAS_COLOR_LEDS 1
#else
#undef LED_POWEROFF_TIMEOUT
#endif
#if ALL(HAS_RESUME_CONTINUE, PRINTER_EVENT_LEDS, SDSUPPORT)
#define HAS_LEDS_OFF_FLAG 1
#endif
#if DISPLAY_SLEEP_MINUTES || TOUCH_IDLE_SLEEP_MINS
#define HAS_DISPLAY_SLEEP 1
#endif
#if HAS_DISPLAY_SLEEP || LCD_BACKLIGHT_TIMEOUT_MINS
#define HAS_GCODE_M255 1
#endif
#if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
2020-10-11 21:58:35 +02:00
#define HAS_MOTOR_CURRENT_I2C 1
#endif
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
#ifdef Z_STEPPER_ALIGN_STEPPER_XY
#define HAS_Z_STEPPER_ALIGN_STEPPER_XY 1
#undef Z_STEPPER_ALIGN_AMP
#endif
#ifndef Z_STEPPER_ALIGN_AMP
#define Z_STEPPER_ALIGN_AMP 1.0
#endif
#endif
2020-01-20 06:35:07 +01:00
// Multiple Z steppers
#if NUM_Z_STEPPERS < 4
#undef INVERT_Z4_VS_Z_DIR
#if NUM_Z_STEPPERS < 3
#undef INVERT_Z3_VS_Z_DIR
#if NUM_Z_STEPPERS < 2
#undef INVERT_Z2_VS_Z_DIR
#endif
#endif
#endif
#if defined(X2_DRIVER_TYPE) && DISABLED(DUAL_X_CARRIAGE)
#define HAS_DUAL_X_STEPPERS 1
#endif
//
// Spindle/Laser power display types
// Defined here so sanity checks can use them
//
#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
#define HAS_CUTTER 1
#define _CUTTER_POWER_PWM255 1
#define _CUTTER_POWER_PERCENT 2
#define _CUTTER_POWER_RPM 3
#define _CUTTER_POWER(V) _CAT(_CUTTER_POWER_, V)
#define CUTTER_UNIT_IS(V) (_CUTTER_POWER(CUTTER_POWER_UNIT) == _CUTTER_POWER(V))
#endif
#if !defined(__AVR__) || !defined(USBCON)
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
#ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128
#endif
// 256 is the max TX buffer limit due to uint8_t head and tail
// : [0, 4, 8, 16, 32, 64, 128, 256]
#ifndef TX_BUFFER_SIZE
#define TX_BUFFER_SIZE 32
#endif
#else
// SERIAL_XON_XOFF not supported on USB-native devices
#undef SERIAL_XON_XOFF
#endif
2019-02-12 22:55:47 +01:00
2022-04-03 23:50:39 +02:00
#if ENABLED(HOST_PROMPT_SUPPORT) && DISABLED(EMERGENCY_PARSER)
#define HAS_GCODE_M876 1
#endif
2019-02-12 22:55:47 +01:00
#if ENABLED(HOST_ACTION_COMMANDS)
#ifndef ACTION_ON_PAUSE
#define ACTION_ON_PAUSE "pause"
#endif
#ifndef ACTION_ON_PAUSED
#define ACTION_ON_PAUSED "paused"
#endif
#ifndef ACTION_ON_RESUME
#define ACTION_ON_RESUME "resume"
#endif
#ifndef ACTION_ON_RESUMED
#define ACTION_ON_RESUMED "resumed"
#endif
#ifndef ACTION_ON_CANCEL
#define ACTION_ON_CANCEL "cancel"
#endif
2020-09-17 13:36:21 +02:00
#ifndef ACTION_ON_START
#define ACTION_ON_START "start"
#endif
2019-02-12 22:55:47 +01:00
#ifndef ACTION_ON_KILL
#define ACTION_ON_KILL "poweroff"
#endif
#ifndef SHUTDOWN_ACTION
#define SHUTDOWN_ACTION "shutdown"
#endif
2019-02-13 03:08:34 +01:00
#if HAS_FILAMENT_SENSOR
2019-02-12 22:55:47 +01:00
#ifndef ACTION_ON_FILAMENT_RUNOUT
#define ACTION_ON_FILAMENT_RUNOUT "filament_runout"
#endif
#ifndef ACTION_REASON_ON_FILAMENT_RUNOUT
#define ACTION_REASON_ON_FILAMENT_RUNOUT "filament_runout"
#endif
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
#ifndef ACTION_ON_G29_RECOVER
#define ACTION_ON_G29_RECOVER "probe_rewipe"
#endif
#ifndef ACTION_ON_G29_FAILURE
#define ACTION_ON_G29_FAILURE "probe_failed"
#endif
#endif
#endif
2020-07-17 16:30:41 +02:00
#if EITHER(FYSETC_MINI_12864_2_1, FYSETC_242_OLED_12864)
#ifndef LED_USER_PRESET_GREEN
#define LED_USER_PRESET_GREEN 128
#endif
#ifndef LED_USER_PRESET_BLUE
#define LED_USER_PRESET_BLUE 0
#endif
#ifndef LED_USER_PRESET_BRIGHTNESS
#define LED_USER_PRESET_BRIGHTNESS 255
#endif
#endif
2019-08-17 01:34:13 +02:00
// Set defaults for unspecified LED user colors
#if ENABLED(LED_CONTROL_MENU)
#ifndef LED_USER_PRESET_RED
#define LED_USER_PRESET_RED 255
#endif
#ifndef LED_USER_PRESET_GREEN
#define LED_USER_PRESET_GREEN 255
#endif
#ifndef LED_USER_PRESET_BLUE
#define LED_USER_PRESET_BLUE 255
#endif
#ifndef LED_USER_PRESET_WHITE
#define LED_USER_PRESET_WHITE 0
#endif
#ifndef LED_USER_PRESET_BRIGHTNESS
#ifdef NEOPIXEL_BRIGHTNESS
#define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
#else
#define LED_USER_PRESET_BRIGHTNESS 255
#endif
#endif
#endif
2020-08-27 21:18:16 +02:00
#if BOTH(LED_CONTROL_MENU, NEOPIXEL2_SEPARATE)
#ifndef LED2_USER_PRESET_RED
#define LED2_USER_PRESET_RED 255
#endif
#ifndef LED2_USER_PRESET_GREEN
#define LED2_USER_PRESET_GREEN 255
#endif
#ifndef LED2_USER_PRESET_BLUE
#define LED2_USER_PRESET_BLUE 255
#endif
#ifndef LED2_USER_PRESET_WHITE
#define LED2_USER_PRESET_WHITE 0
#endif
#ifndef LED2_USER_PRESET_BRIGHTNESS
#ifdef NEOPIXEL2_BRIGHTNESS
#define LED2_USER_PRESET_BRIGHTNESS NEOPIXEL2_BRIGHTNESS
#else
#define LED2_USER_PRESET_BRIGHTNESS 255
#endif
#endif
#endif
// Full Touch Screen needs 'tft/xpt2046'
#if EITHER(TFT_TOUCH_DEVICE_XPT2046, HAS_TFT_LVGL_UI)
#define HAS_TFT_XPT2046 1
#endif
// Touch Screen or "Touch Buttons" need XPT2046 pins
// but they use different components
#if HAS_TFT_XPT2046 || HAS_RES_TOUCH_BUTTONS
#define NEED_TOUCH_PINS 1
#endif
2019-08-17 01:34:13 +02:00
// Extensible UI pin mapping for RepRapDiscount
#if ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
#define TOUCH_UI_ULTIPANEL 1
#endif
// Poll-based jogging for joystick and other devices
#if ENABLED(JOYSTICK)
#define POLL_JOG
#endif
2020-01-07 20:52:19 +01:00
2021-05-19 07:21:34 +02:00
#if X2_HOME_DIR > 0
#define X2_HOME_TO_MAX 1
#elif X2_HOME_DIR < 0
#define X2_HOME_TO_MIN 1
#endif
2020-12-29 06:10:48 +01:00
#ifndef HOMING_BUMP_MM
#define HOMING_BUMP_MM { 0, 0, 0 }
#endif
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && NONE(USE_OTG_USB_HOST, USE_UHS3_USB)
#define USE_UHS2_USB
#endif
/**
* Driver Timings (in nanoseconds)
* NOTE: Driver timing order is longest-to-shortest duration.
* Preserve this ordering when adding new drivers.
*/
#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
#if HAS_DRIVER(TB6560)
#define MINIMUM_STEPPER_POST_DIR_DELAY 15000
#elif HAS_DRIVER(TB6600)
#define MINIMUM_STEPPER_POST_DIR_DELAY 1500
#elif HAS_DRIVER(DRV8825)
#define MINIMUM_STEPPER_POST_DIR_DELAY 650
#elif HAS_DRIVER(LV8729)
#define MINIMUM_STEPPER_POST_DIR_DELAY 500
#elif HAS_DRIVER(A5984)
#define MINIMUM_STEPPER_POST_DIR_DELAY 400
#elif HAS_DRIVER(A4988)
#define MINIMUM_STEPPER_POST_DIR_DELAY 200
2020-03-02 19:03:43 +01:00
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
#define MINIMUM_STEPPER_POST_DIR_DELAY 60
#else
#define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire
#endif
#endif
#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
#define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
#endif
#ifndef MINIMUM_STEPPER_PULSE
#if HAS_DRIVER(TB6560)
#define MINIMUM_STEPPER_PULSE 30
#elif HAS_DRIVER(TB6600)
#define MINIMUM_STEPPER_PULSE 3
#elif HAS_DRIVER(DRV8825)
#define MINIMUM_STEPPER_PULSE 2
#elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
#define MINIMUM_STEPPER_PULSE 1
2020-03-02 19:03:43 +01:00
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
#define MINIMUM_STEPPER_PULSE 0
#elif HAS_DRIVER(LV8729)
#define MINIMUM_STEPPER_PULSE 0
#else
#define MINIMUM_STEPPER_PULSE 2
#endif
#endif
#ifndef MAXIMUM_STEPPER_RATE
#if HAS_DRIVER(TB6560)
#define MAXIMUM_STEPPER_RATE 15000
#elif HAS_DRIVER(TB6600)
#define MAXIMUM_STEPPER_RATE 150000
#elif HAS_DRIVER(DRV8825)
#define MAXIMUM_STEPPER_RATE 250000
#elif HAS_DRIVER(A4988)
#define MAXIMUM_STEPPER_RATE 500000
#elif HAS_DRIVER(LV8729)
#define MAXIMUM_STEPPER_RATE 1000000
2020-03-02 19:03:43 +01:00
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
#define MAXIMUM_STEPPER_RATE 5000000
#else
#define MAXIMUM_STEPPER_RATE 250000
#endif
2020-01-07 20:52:19 +01:00
#endif
2020-05-12 02:22:41 +02:00
#if ENABLED(DIRECT_STEPPING)
#ifndef STEPPER_PAGES
#define STEPPER_PAGES 16
#endif
#ifndef STEPPER_PAGE_FORMAT
#define STEPPER_PAGE_FORMAT SP_4x2_256
#endif
#ifndef PAGE_MANAGER
#define PAGE_MANAGER SerialPageManager
#endif
#endif
// Remove unused STEALTHCHOP flags
#if NUM_AXES < 9
#undef STEALTHCHOP_W
#undef CALIBRATION_MEASURE_WMIN
#undef CALIBRATION_MEASURE_WMAX
#if NUM_AXES < 8
#undef STEALTHCHOP_V
#undef CALIBRATION_MEASURE_VMIN
#undef CALIBRATION_MEASURE_VMAX
#if NUM_AXES < 7
#undef STEALTHCHOP_U
#undef CALIBRATION_MEASURE_UMIN
#undef CALIBRATION_MEASURE_UMAX
#if NUM_AXES < 6
#undef STEALTHCHOP_K
#undef CALIBRATION_MEASURE_KMIN
#undef CALIBRATION_MEASURE_KMAX
#if NUM_AXES < 5
#undef STEALTHCHOP_J
#undef CALIBRATION_MEASURE_JMIN
#undef CALIBRATION_MEASURE_JMAX
#if NUM_AXES < 4
#undef STEALTHCHOP_I
#undef CALIBRATION_MEASURE_IMIN
#undef CALIBRATION_MEASURE_IMAX
#if NUM_AXES < 3
#undef STEALTHCHOP_Z
#undef Z_IDLE_HEIGHT
#undef Z_PROBE_SLED
#undef Z_SAFE_HOMING
#undef HOME_Z_FIRST
#undef HOMING_Z_WITH_PROBE
#undef ENABLE_LEVELING_FADE_HEIGHT
#undef NUM_Z_STEPPERS
#undef CNC_WORKSPACE_PLANES
#if NUM_AXES < 2
#undef STEALTHCHOP_Y
#undef QUICK_HOME
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
//
// SD Card connection methods
// Defined here so pins and sanity checks can use them
//
#if ENABLED(SDSUPPORT)
#define _SDCARD_LCD 1
#define _SDCARD_ONBOARD 2
#define _SDCARD_CUSTOM_CABLE 3
#define _SDCARD_ID(V) _CAT(_SDCARD_, V)
#define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V))
#else
#define SD_CONNECTION_IS(...) 0
#endif
2020-04-29 21:46:33 +02:00
2020-06-18 22:23:03 +02:00
// Power Monitor sensors
#if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE)
#define HAS_POWER_MONITOR 1
2021-04-13 22:17:52 +02:00
#if ENABLED(POWER_MONITOR_CURRENT) && (ENABLED(POWER_MONITOR_VOLTAGE) || defined(POWER_MONITOR_FIXED_VOLTAGE))
#define HAS_POWER_MONITOR_WATTS 1
#endif
2020-06-18 22:23:03 +02:00
#endif
2020-04-29 21:46:33 +02:00
// Flag if an EEPROM type is pre-selected
#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM, QSPI_EEPROM, FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SDCARD_EEPROM_EMULATION)
#define NO_EEPROM_SELECTED 1
#endif
2020-08-06 06:21:41 +02:00
// Flag whether hex_print.cpp is used
#if ANY(AUTO_BED_LEVELING_UBL, M100_FREE_MEMORY_WATCHER, DEBUG_GCODE_PARSER, TMC_DEBUG, MARLIN_DEV_MODE, DEBUG_CARDREADER, M20_TIMESTAMP_SUPPORT)
2020-08-06 06:21:41 +02:00
#define NEED_HEX_PRINT 1
#endif
2020-08-06 11:19:56 +02:00
2021-02-27 23:06:48 +01:00
// Flags for Case Light having a color property or a single pin
#if ENABLED(CASE_LIGHT_ENABLE)
#if EITHER(CASE_LIGHT_USE_NEOPIXEL, CASE_LIGHT_USE_RGB_LED)
#define CASE_LIGHT_IS_COLOR_LED 1
#else
#define NEED_CASE_LIGHT_PIN 1
#endif
#endif
// Flags for Case Light having a brightness property
#if ENABLED(CASE_LIGHT_ENABLE) && (NONE(CASE_LIGHT_NO_BRIGHTNESS, CASE_LIGHT_IS_COLOR_LED) || ENABLED(CASE_LIGHT_USE_NEOPIXEL))
#define CASELIGHT_USES_BRIGHTNESS 1
#endif
2020-08-06 11:19:56 +02:00
// Flag whether least_squares_fit.cpp is used
#if ANY(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_LINEAR, HAS_Z_STEPPER_ALIGN_STEPPER_XY)
2020-08-06 11:19:56 +02:00
#define NEED_LSF 1
#endif
#if BOTH(HAS_TFT_LVGL_UI, CUSTOM_MENU_MAIN)
#define _HAS_1(N) (defined(MAIN_MENU_ITEM_##N##_DESC) && defined(MAIN_MENU_ITEM_##N##_GCODE))
#define HAS_USER_ITEM(V...) DO(HAS,||,V)
#else
#define HAS_USER_ITEM(N) 0
#endif
/**
* LCD_SERIAL_PORT must be defined ahead of HAL.h
*/
#ifndef LCD_SERIAL_PORT
2022-06-22 12:08:24 +02:00
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI || HAS_DGUS_LCD
#if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_MINI_E3_V1_2, BTT_SKR_MINI_E3_V2_0, BTT_SKR_MINI_E3_V3_0, BTT_SKR_E3_TURBO)
#define LCD_SERIAL_PORT 1
2022-06-22 12:08:24 +02:00
#elif MB(CREALITY_V24S1_301, CREALITY_V24S1_301F4, CREALITY_V423, MKS_ROBIN)
#define LCD_SERIAL_PORT 2 // Creality Ender3S1, MKS Robin
#else
2022-06-22 12:08:24 +02:00
#define LCD_SERIAL_PORT 3 // Other boards
#endif
#endif
#ifdef LCD_SERIAL_PORT
#define AUTO_ASSIGNED_LCD_SERIAL 1
#endif
#endif
#if !HAS_MULTI_SERIAL
#undef MEATPACK_ON_SERIAL_PORT_2
#endif
#if EITHER(MEATPACK_ON_SERIAL_PORT_1, MEATPACK_ON_SERIAL_PORT_2)
#define HAS_MEATPACK 1
#endif
// AVR are (usually) too limited in resources to store the configuration into the binary
#if ENABLED(CONFIGURATION_EMBEDDING) && !defined(FORCE_CONFIG_EMBED) && (defined(__AVR__) || DISABLED(SDSUPPORT) || EITHER(SDCARD_READONLY, DISABLE_M503))
#undef CONFIGURATION_EMBEDDING
#define CANNOT_EMBED_CONFIGURATION defined(__AVR__)
#endif
2022-06-01 00:09:44 +02:00
#if ANY(DISABLE_INACTIVE_X, DISABLE_INACTIVE_Y, DISABLE_INACTIVE_Z, DISABLE_INACTIVE_I, DISABLE_INACTIVE_J, DISABLE_INACTIVE_K, DISABLE_INACTIVE_U, DISABLE_INACTIVE_V, DISABLE_INACTIVE_W, DISABLE_INACTIVE_E)
#define HAS_DISABLE_INACTIVE_AXIS 1
#endif
// Fan Kickstart
#if FAN_KICKSTART_TIME && !defined(FAN_KICKSTART_POWER)
#define FAN_KICKSTART_POWER 180
#endif
#if FAN_MIN_PWM == 0 && FAN_MAX_PWM == 255
#define CALC_FAN_SPEED(f) (f ?: FAN_OFF_PWM)
#else
#define CALC_FAN_SPEED(f) (f ? map(f, 1, 255, FAN_MIN_PWM, FAN_MAX_PWM) : FAN_OFF_PWM)
#endif
2022-10-21 23:34:22 +02:00
// Input shaping
#if ENABLED(INPUT_SHAPING)
#if !HAS_Y_AXIS
#undef SHAPING_FREQ_Y
#undef SHAPING_BUFFER_Y
#endif
#ifdef SHAPING_FREQ_X
#define HAS_SHAPING_X 1
#endif
#ifdef SHAPING_FREQ_Y
#define HAS_SHAPING_Y 1
#endif
#endif