Firmware2/Marlin/src/pins/stm32/pins_FYSETC_AIO_II.h

182 lines
4.0 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2019-07-05 05:44:12 +02:00
#pragma once
#ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#define BOARD_NAME "FYSETC AIO II"
#define BOARD_WEBSITE_URL "https://fysetc.com"
#define DISABLE_JTAG
#define pins_v2_20190128 // geo-f:add for new pins define
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Limit Switches
//
#define X_STOP_PIN PA1
#define Y_STOP_PIN PA0
#define Z_STOP_PIN PB14
//
// Filament runout
//
#ifdef pins_v2_20190128
#define FIL_RUNOUT_PIN PB15
#else
#define FIL_RUNOUT_PIN PB5
#endif
//
// Steppers
//
#define X_STEP_PIN PB8
#define X_DIR_PIN PB9
#define X_ENABLE_PIN PA8
#define Y_STEP_PIN PB2
#ifdef pins_v2_20190128
#define Y_DIR_PIN PB3
#else
#define Y_DIR_PIN PB0
#endif
#define Y_ENABLE_PIN PB1
#define Z_STEP_PIN PC0
#define Z_DIR_PIN PC1
#define Z_ENABLE_PIN PC2
#define E0_STEP_PIN PC15
#define E0_DIR_PIN PC14
#define E0_ENABLE_PIN PC13
//
// Stepper current PWM
//
// X:PA2 Y:PA3 Z:PB12 E:PB13 // changed for test
//#define MOTOR_CURRENT_PWM_XY_PIN PA3
//#define MOTOR_CURRENT_PWM_Z_PIN PA2 // PB12
//#define MOTOR_CURRENT_PWM_XY_PIN PB6
//#define MOTOR_CURRENT_PWM_Z_PIN PB7 // PB12
//#define MOTOR_CURRENT_PWM_E_PIN -1 // PB13
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT {500, 500, 400} // geo-f:old 1300 1300 1250
// 采用 SDIO PCB从左到右数
// 1:PC10 - SDIO_D2
// 2:PC11 - SDIO_D3
// 3:PD2 - SDIO_CMD
// 4:VCC
// 5:PC12 - SDIO_CK
// 6:VDD
// 7:PC8 - SDIO_D0
// 8:PC9 - SDIO_D1
// 9:PA15 - SD_DETECT_PIN
//
// Heaters / Fans
//
#define HEATER_0_PIN PC7
#define HEATER_BED_PIN PC6
#ifndef FAN_PIN
#define FAN_PIN PC8
#endif
//
// Temperature Sensors
//
#define TEMP_BED_PIN PC5 // Analog Input
#define TEMP_0_PIN PC4 // Analog Input
//
// Misc. Functions
//
#define SDSS PA4
//
// LCD Pins
//
#if HAS_SPI_LCD
#define BEEPER_PIN PC9
#if HAS_GRAPHICAL_LCD
#define DOGLCD_A0 PA15
#ifdef pins_v2_20190128
#define DOGLCD_CS PB5
#else
#define DOGLCD_CS PB7
#endif
//#define LCD_CONTRAST 190
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#endif
// not connected to a pin
#define SD_DETECT_PIN PC3
#if ENABLED(NEWPANEL)
// The encoder and click button
#define BTN_EN1 PC10
#define BTN_EN2 PC11
#define BTN_ENC PC12
#endif
#ifdef pins_v2_20190128
#define LCD_RESET_PIN PB4
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB0
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN PB6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN PB7
#endif
#else
#define LCD_RESET_PIN PB6
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB3
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN PB4
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN PB5
#endif
#endif
#endif