Firmware2/Marlin/language_de.h

346 lines
21 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* German
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H
#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")
2016-12-12 16:18:53 +01:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")
#define MSG_BACK _UxGT("Zurück")
2016-12-12 16:18:53 +01:00
#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")
#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
#define MSG_MAIN _UxGT("Hauptmenü")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
#define MSG_DEBUG_MENU _UxGT("Debug Menu")
#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittsb. Test")
2016-12-12 16:18:53 +01:00
#define MSG_AUTO_HOME _UxGT("Home") // G28
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
#define MSG_LEVEL_BED_DONE _UxGT("Fertig")
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle")
2017-04-28 21:09:10 +02:00
#define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.")
2016-12-12 16:18:53 +01:00
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")
#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle")
2017-04-28 21:09:10 +02:00
#define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.")
2016-12-12 16:18:53 +01:00
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")
#define MSG_COOLDOWN _UxGT("Abkühlen")
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
#define MSG_EXTRUDE _UxGT("Extrudieren")
#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("Bewegen")
#define MSG_BED_LEVELING _UxGT("Bett Nivellierung")
2016-12-12 16:18:53 +01:00
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
#define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.")
#define MSG_USER_MENU _UxGT("Benutzer Menü")
#define MSG_MOVING _UxGT("In Bewegung...")
#define MSG_FREE_XY _UxGT("Abstand XY")
2016-12-12 16:18:53 +01:00
#define MSG_MOVE_X _UxGT("X")
#define MSG_MOVE_Y _UxGT("Y")
#define MSG_MOVE_Z _UxGT("Z")
#define MSG_MOVE_E _UxGT("Extruder ")
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM _UxGT("10,0 mm")
#define MSG_SPEED _UxGT("Geschw.")
#define MSG_BED_Z _UxGT("Bett Z")
#define MSG_NOZZLE _UxGT("Düse")
#define MSG_BED _UxGT("Bett")
#define MSG_FAN_SPEED _UxGT("Lüfter")
#define MSG_FLOW _UxGT("Flussrate")
2016-12-12 16:18:53 +01:00
#define MSG_CONTROL _UxGT("Einstellungen")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
#define MSG_AUTOTEMP _UxGT("AutoTemp")
#define MSG_ON _UxGT("Ein")
#define MSG_OFF _UxGT("Aus")
#define MSG_PID_P _UxGT("PID P")
#define MSG_PID_I _UxGT("PID I")
#define MSG_PID_D _UxGT("PID D")
#define MSG_PID_C _UxGT("PID C")
#define MSG_SELECT _UxGT("Auswählen")
#define MSG_ACC _UxGT("A")
2017-05-28 19:13:27 +02:00
#define MSG_JERK _UxGT("Jerk")
2016-12-12 16:18:53 +01:00
#define MSG_VX_JERK _UxGT("V X Jerk")
#define MSG_VY_JERK _UxGT("V Y Jerk")
#define MSG_VZ_JERK _UxGT("V Z Jerk")
#define MSG_VE_JERK _UxGT("V E Jerk")
#define MSG_VELOCITY _UxGT("Geschwindigkeit")
2016-12-12 16:18:53 +01:00
#define MSG_VMAX _UxGT("V max ") // space by purpose
#define MSG_VMIN _UxGT("V min")
#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")
#define MSG_ACCELERATION _UxGT("Beschleunigung")
2016-12-12 16:18:53 +01:00
#define MSG_AMAX _UxGT("A max ") // space by purpose
#define MSG_A_RETRACT _UxGT("A Retract")
#define MSG_A_TRAVEL _UxGT("A Leerfahrt")
2017-05-28 19:13:27 +02:00
#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
2016-12-12 16:18:53 +01:00
#define MSG_XSTEPS _UxGT("X Steps/mm")
#define MSG_YSTEPS _UxGT("Y Steps/mm")
#define MSG_ZSTEPS _UxGT("Z Steps/mm")
#define MSG_ESTEPS _UxGT("E Steps/mm")
#define MSG_E1STEPS _UxGT("E1 Steps/mm")
#define MSG_E2STEPS _UxGT("E2 Steps/mm")
#define MSG_E3STEPS _UxGT("E3 Steps/mm")
#define MSG_E4STEPS _UxGT("E4 Steps/mm")
2017-04-09 10:23:05 +02:00
#define MSG_E5STEPS _UxGT("E5 Steps/mm")
2016-12-12 16:18:53 +01:00
#define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bewegung")
2017-04-17 06:00:08 +02:00
#define MSG_FILAMENT _UxGT("Filament")
2016-12-12 16:18:53 +01:00
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM _UxGT("D Fil.")
#define MSG_ADVANCE_K _UxGT("Advance Faktor")
2016-12-12 16:18:53 +01:00
#define MSG_CONTRAST _UxGT("LCD Kontrast")
#define MSG_STORE_EEPROM _UxGT("Konfig. speichern")
#define MSG_LOAD_EEPROM _UxGT("Konfig. laden")
#define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden")
#define MSG_INIT_EEPROM _UxGT("Werkseinstellungen")
2016-12-12 16:18:53 +01:00
#define MSG_REFRESH _UxGT("Aktualisieren")
#define MSG_WATCH _UxGT("Info")
#define MSG_PREPARE _UxGT("Vorbereitung")
#define MSG_TUNE _UxGT("Justierung")
#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause")
#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung")
#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch")
#define MSG_CARD_MENU _UxGT("SD-Karte")
#define MSG_NO_CARD _UxGT("Keine SD-Karte")
#define MSG_DWELL _UxGT("Warten...")
#define MSG_USERWAIT _UxGT("Warte auf Nutzer")
#define MSG_PRINT_PAUSED _UxGT("Druck pausiert")
2016-12-12 16:18:53 +01:00
#define MSG_RESUMING _UxGT("Druckfortsetzung")
#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")
#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet")
#define MSG_KILLED _UxGT("ABGEBROCHEN")
#define MSG_STOPPED _UxGT("ANGEHALTEN")
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
2016-12-12 16:18:53 +01:00
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("Autom. Retract")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren")
2016-12-12 16:18:53 +01:00
#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("homen")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.")
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten")
#define MSG_HALTED _UxGT("DRUCKER STOPP")
#define MSG_PLEASE_RESET _UxGT("Bitte Resetten")
#define MSG_SHORT_DAY _UxGT("t") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Extr. heizt...")
#define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt")
#define MSG_BED_HEATING _UxGT("Bett heizt...")
#define MSG_BED_DONE _UxGT("Bett aufgeheizt")
#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen")
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MENU _UxGT("Über den Drucker")
#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")
#define MSG_3POINT_LEVELING _UxGT("3-Punkt Nivellierung")
#define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung")
#define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.")
#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling")
#define MSG_MESH_LEVELING _UxGT("Netz Nivellierung")
#define MSG_INFO_STATS_MENU _UxGT("Drucker Statistik")
2016-12-12 16:18:53 +01:00
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
2017-01-12 16:06:58 +01:00
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")
#define MSG_INFO_EXTRUDERS _UxGT("Extruder")
2016-12-12 16:18:53 +01:00
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protokoll")
#define MSG_CASE_LIGHT _UxGT("Beleuchtung")
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit")
2017-06-10 23:27:39 +02:00
#define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!")
#define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen")
#define MSG_UBL_TOOLS _UxGT("UBL Tools")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")
#define MSG_UBL_BC_INSERT2 _UxGT("Messen")
#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen")
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")
#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")
#define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
#define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung")
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.")
#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren")
#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte")
#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp")
#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben")
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host")
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV")
#define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben")
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten")
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in")
#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in")
#define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in")
#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz")
#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren")
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.")
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle")
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.")
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz")
#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
#define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden")
#define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern")
#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")
#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
2016-07-14 20:46:35 +02:00
2016-11-18 05:17:14 +01:00
#if LCD_WIDTH >= 20
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")
#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")
2016-07-14 20:46:35 +02:00
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett")
#define MSG_INFO_PRINT_TIME _UxGT("Gesamt ")
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
2016-07-14 20:46:35 +02:00
#endif
2017-05-26 03:55:00 +02:00
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Stromversorgung")
2016-12-12 16:18:53 +01:00
#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")
#define MSG_DAC_PERCENT _UxGT("Treiber %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
2016-12-03 14:05:34 +01:00
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("DRUCK PAUSIERT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
2017-01-12 16:06:58 +01:00
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf...")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DE_H