Firmware2/Marlin/src/pins/pins_ARCHIM2.h

188 lines
5.5 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* ARCHIM2 pin assignment (pins_ARCHIM2.h)
*
* The Archim2 board requires Arduino Archim addons installed.
* Add the following URL to Arduino IDE's Additional Board Manager URLs:
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
* In the Arduino IDE Board Manager search for Archim and install the package.
* Change your target board to "Archim".
*
* Further information is provided by UltiMachine
* https://github.com/ultimachine/Archim/wiki/Archim-v2.0
* https://github.com/ultimachine/Archim/wiki
*
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Archim' selected from the 'Tools -> Boards' menu."
#endif
//
// Items marked * have been altered from Archim v1.0
//
// TMC2130 Diag Pins (currently just for reference)
#define X_DIAG_PIN 59 // PA4 X_DIAG
#define Y_DIAG_PIN 48 // PC15 Y_DIAG
#define Z_DIAG_PIN 36 // PC4 Z_DIAG
#define E0_DIAG_PIN 78 // PB23 E1_DIAG
#define E1_DIAG_PIN 25 // PD0 E2_DIAG
//
// Limit Switches
//
// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
// Otherwise use a physical endstop based configuration.
#if DISABLED(SENSORLESS_HOMING)
#define X_MIN_PIN 14 // PD4 MIN ES1
#define X_MAX_PIN 32 // PD10 MAX ES1
#define Y_MIN_PIN 29 // PD6 MIN ES2
#define Y_MAX_PIN 15 // PD5 MAX ES2
#else
#if X_HOME_DIR == -1
#define X_MIN_PIN X_DIAG_PIN
#define X_MAX_PIN 32
#else
#define X_MIN_PIN 14
#define X_MAX_PIN X_DIAG_PIN
#endif
#if Y_HOME_DIR == -1
#define Y_MIN_PIN Y_DIAG_PIN
#define Y_MAX_PIN 15
#else
#define Y_MIN_PIN 29
#define Y_MAX_PIN Y_DIAG_PIN
#endif
#endif
#define Z_MIN_PIN 31 // PA7 MIN ES3
#define Z_MAX_PIN 30 // PD9 MAX ES3
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 38 // PC6 X-STEP *
#define X_DIR_PIN 37 // PC5 X-DIR *
#define X_ENABLE_PIN 41 // PC9 EN1
2018-02-04 23:35:52 +01:00
#ifndef X_CS_PIN
#define X_CS_PIN 39 // PC7 X_nCS
#endif
#define Y_STEP_PIN 51 // PC12 Y-STEP *
#define Y_DIR_PIN 92 // PC11 Y-DIR -AddOns *
#define Y_ENABLE_PIN 49 // PC14 Y-EN *
2018-02-04 23:35:52 +01:00
#ifndef Y_CS_PIN
#define Y_CS_PIN 50 // PC13 Y_nCS
#endif
#define Z_STEP_PIN 46 // PC17 Z-STEP *
#define Z_DIR_PIN 47 // PC16 Z-DIR *
#define Z_ENABLE_PIN 44 // PC19 Z-END *
2018-02-04 23:35:52 +01:00
#ifndef Z_CS_PIN
#define Z_CS_PIN 45 // PC18 Z_nCS
#endif
#define E0_STEP_PIN 107 // PB10 E1-STEP -AddOns *
#define E0_DIR_PIN 96 // PC10 E1-DIR -AddOns *
#define E0_ENABLE_PIN 105 // PB22 E1-EN -AddOns *
2018-02-04 23:35:52 +01:00
#ifndef E0_CS_PIN
#define E0_CS_PIN 104 // PC20 E1_nCS -AddOns *
#endif
#define E1_STEP_PIN 22 // PB26 E2_STEP *
#define E1_DIR_PIN 97 // PB24 E2_DIR -AddOns *
#define E1_ENABLE_PIN 18 // PA11 E2-EN
2018-02-04 23:35:52 +01:00
#ifndef E1_CS_PIN
#define E1_CS_PIN 19 // PA10 E2_nCS
#endif
//
// Software SPI pins for TMC2130 stepper drivers.
// Required for the Archim2 board.
//
#if ENABLED(TMC_USE_SW_SPI)
#define TMC_SW_MOSI 28 // PD3
#define TMC_SW_MISO 26 // PD1
#define TMC_SW_SCK 27 // PD2
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 *
#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 *
#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 *
#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 *
//
// Heaters / Fans
//
#ifndef FAN_PIN
#define FAN_PIN 4 // D4 PC26 FET_PWM1
#endif
#define FAN1_PIN 5 // D5 PC25 FET_PWM2
#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3
#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4
#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5
#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM
//
// Misc. Functions
//
#define SDSS 87 // D87 PA29 CS
//////////////////////////
// LCDs and Controllers //
//////////////////////////
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
#define LCD_PINS_D4 69 // D69 PA0_CANTX0
#define LCD_PINS_D5 54 // D54 PA16_SCK1
#define LCD_PINS_D6 68 // D68 PA1_CANRX0
#define LCD_PINS_D7 34 // D34 PC2_PWML0
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
#endif // NEWPANEL
#endif // ULTRA_LCD