Firmware2/Marlin/language_zh_CN.h

239 lines
18 KiB
C
Raw Normal View History

2016-12-12 16:18:53 +01:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Simplified Chineses
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_ZH_CN_H
#define LANGUAGE_ZH_CN_H
#define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready."
#define MSG_SD_INSERTED _UxGT("存储卡已插入") //"Card inserted"
#define MSG_SD_REMOVED _UxGT("存储卡被拔出") //"Card removed"
#define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters
#define MSG_MAIN _UxGT("主菜单") //"Main"
#define MSG_AUTOSTART _UxGT("自动开始") //"Autostart"
#define MSG_DISABLE_STEPPERS _UxGT("关闭步进电机") //"Disable steppers"
#define MSG_AUTO_HOME _UxGT("回原点") //"Auto home"
#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X"
#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y"
#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z"
#define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ"
#define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin"
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point"
#define MSG_LEVEL_BED_DONE _UxGT("完成热床调平") //"Leveling Done!"
#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied"
#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin"
#define MSG_PREHEAT_1 _UxGT("预热PLA") //"Preheat PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_2 _UxGT("预热ABS") //"Preheat ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 设置") //MSG_PREHEAT_2 " conf"
#define MSG_COOLDOWN _UxGT("降温") //"Cooldown"
#define MSG_SWITCH_PS_ON _UxGT("电源打开") //"Switch power on"
#define MSG_SWITCH_PS_OFF _UxGT("电源关闭") //"Switch power off"
#define MSG_EXTRUDE _UxGT("挤出") //"Extrude"
#define MSG_RETRACT _UxGT("回抽") //"Retract"
#define MSG_MOVE_AXIS _UxGT("移动轴") //"Move axis"
#define MSG_BED_LEVELING _UxGT("调平热床") //"Bed leveling"
2016-12-12 16:18:53 +01:00
#define MSG_LEVEL_BED _UxGT("调平热床") //"Level bed"
#define MSG_MOVE_X _UxGT("移动X") //"Move X"
#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y"
#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z"
#define MSG_MOVE_E _UxGT("挤出机") //"Extruder"
#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm"
#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm"
#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm"
#define MSG_SPEED _UxGT("速率") //"Speed"
#define MSG_BED_Z _UxGT("热床Z") //"Bed Z"
#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 喷嘴") //"Nozzle" 噴嘴
#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 热床") //"Bed"
#define MSG_FAN_SPEED _UxGT("风扇速率") //"Fan speed"
#define MSG_FLOW _UxGT("挤出速率") //"Flow"
#define MSG_CONTROL _UxGT("控制") //"Control"
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min"
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 因数") //" " LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP _UxGT("自动控温") //"Autotemp"
#define MSG_ON _UxGT("开 ") //"On "
#define MSG_OFF _UxGT("关 ") //"Off"
#define MSG_PID_P _UxGT("PID-P") //"PID-P"
#define MSG_PID_I _UxGT("PID-I") //"PID-I"
#define MSG_PID_D _UxGT("PID-D") //"PID-D"
#define MSG_PID_C _UxGT("PID-C") //"PID-C"
#define MSG_SELECT _UxGT("选择") //"Select"
#define MSG_ACC _UxGT("加速度") //"Accel" acceleration
2017-05-28 19:13:27 +02:00
#define MSG_JERK _UxGT("抖动速率") // "Jerk"
2016-12-12 16:18:53 +01:00
#define MSG_VX_JERK _UxGT("X轴抖动速率") //"Vx-jerk"
#define MSG_VY_JERK _UxGT("Y轴抖动速率") //"Vy-jerk"
#define MSG_VZ_JERK _UxGT("Z轴抖动速率") //"Vz-jerk"
#define MSG_VE_JERK _UxGT("挤出机抖动速率") //"Ve-jerk"
#define MSG_VMAX _UxGT("最大进料速率") //"Vmax " max_feedrate_mm_s
#define MSG_VMIN _UxGT("最小进料速率") //"Vmin" min_feedrate_mm_s
#define MSG_VTRAV_MIN _UxGT("最小移动速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
#define MSG_AMAX _UxGT("最大打印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
#define MSG_A_RETRACT _UxGT("收进加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
#define MSG_A_TRAVEL _UxGT("非打印移动加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
2017-05-28 19:13:27 +02:00
#define MSG_STEPS_PER_MM _UxGT("轴步数/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
2016-12-12 16:18:53 +01:00
#define MSG_XSTEPS _UxGT("X轴步数/mm") //"Xsteps/mm" axis_steps_per_mm, axis steps-per-unit G92
#define MSG_YSTEPS _UxGT("Y轴步数/mm") //"Ysteps/mm"
#define MSG_ZSTEPS _UxGT("Z轴步数/mm") //"Zsteps/mm"
#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm"
#define MSG_TEMPERATURE _UxGT("温度") //"Temperature"
#define MSG_MOTION _UxGT("运动") //"Motion"
2017-04-17 06:00:08 +02:00
#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu
2016-12-12 16:18:53 +01:00
#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled
#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia."
#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast"
#define MSG_STORE_EEPROM _UxGT("保存设置") //"Store memory"
#define MSG_LOAD_EEPROM _UxGT("装载设置") //"Load memory"
2016-12-12 16:18:53 +01:00
#define MSG_RESTORE_FAILSAFE _UxGT("恢复安全值") //"Restore failsafe"
#define MSG_REFRESH _UxGT("刷新") //"Refresh"
#define MSG_WATCH _UxGT("信息屏") //"Info screen"
#define MSG_PREPARE _UxGT("准备") //"Prepare"
#define MSG_TUNE _UxGT("调整") //"Tune"
#define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print"
#define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print"
#define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print"
#define MSG_CARD_MENU _UxGT("从存储卡上打印") //"Print from SD"
#define MSG_NO_CARD _UxGT("无存储卡") //"No SD card"
#define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..."
#define MSG_USERWAIT _UxGT("等待用户 ...") //"Wait for user..."
#define MSG_RESUMING _UxGT("恢复打印中") //"Resuming print"
#define MSG_PRINT_ABORTED _UxGT("打印已取消") //"Print aborted"
#define MSG_NO_MOVE _UxGT("无移动") //"No move."
#define MSG_KILLED _UxGT("已杀掉") //"KILLED. "
#define MSG_STOPPED _UxGT("已停止") //"STOPPED. "
#define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm)
#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" retract_length_swap, swap retract length (positive mm), for extruder change
#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering)
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" retract_recover_length_swap, additional swap recover length (mm, added to retract length when recovering from extruder change)
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled,
#define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament"
#define MSG_INIT_SDCARD _UxGT("初始化存储卡") //"Init. SD card"
#define MSG_CNG_SDCARD _UxGT("更换存储卡") //"Change SD card"
#define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits
#define MSG_HOME _UxGT("归位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("先") //"first"
#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"
#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y"
#define MSG_BABYSTEP_Z _UxGT("微量调整Z轴") //"Babystep Z"
#define MSG_ENDSTOP_ABORT _UxGT("挡块终止") //"Endstop abort"
#define MSG_HEATING_FAILED_LCD _UxGT("加热失败") //"Heating failed"
#define MSG_ERR_REDUNDANT_TEMP _UxGT("错误REDUNDANT TEMP") //"Err: REDUNDANT TEMP"
#define MSG_THERMAL_RUNAWAY _UxGT("温控失控") //"THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP _UxGT("错误:最高温度") //"Err: MAXTEMP"
#define MSG_ERR_MINTEMP _UxGT("错误:最低温度") //"Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED _UxGT("错误:最高热床温度") //"Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED _UxGT("错误:最低热床温度") //"Err: MINTEMP BED"
#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED"
#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset"
#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only
#define MSG_SHORT_HOUR _UxGT("时") //"h" // One character only
#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only
#define MSG_HEATING _UxGT("加热中 ...") //"Heating..."
#define MSG_HEATING_COMPLETE _UxGT("完成加热") //"Heating done."
#define MSG_BED_HEATING _UxGT("加热热床中") //"Bed Heating."
#define MSG_BED_DONE _UxGT("完成加热热床") //"Bed done."
#define MSG_DELTA_CALIBRATE _UxGT("⊿校准") //"Delta Calibration"
#define MSG_DELTA_CALIBRATE_X _UxGT("校准X") //"Calibrate X"
#define MSG_DELTA_CALIBRATE_Y _UxGT("校准Y") //"Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z _UxGT("校准Z") //"Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("校准中心") //"Calibrate Center"
#define MSG_INFO_MENU _UxGT("关于打印机") //"About Printer"
#define MSG_INFO_PRINTER_MENU _UxGT("打印机信息") //"Printer Info"
#define MSG_INFO_STATS_MENU _UxGT("打印机统计") //"Printer Stats"
#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info"
#define MSG_INFO_THERMISTOR_MENU _UxGT("温度计") //"Thermistors"
#define MSG_INFO_EXTRUDERS _UxGT("挤出机") //"Extruders"
#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud"
#define MSG_INFO_PROTOCOL _UxGT("协议") //"Protocol"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"
#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"
#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"
#else
#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"
#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"
#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"
#endif
#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp"
#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"
#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("挤出更多") //"Extrude more"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("丝料挤出") //"filament extrude"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //""
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("挤出中 ...") //"Extruding..."
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_ZH_CN_H