2020-10-21 20:44:55 +02:00
|
|
|
/**
|
|
|
|
|
* Marlin 3D Printer Firmware
|
|
|
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
|
|
|
*
|
|
|
|
|
* Based on Sprinter and grbl.
|
|
|
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
|
|
|
*
|
|
|
|
|
* This program is free software: you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Arduino Mega with RAMPS-S v1.2 by Sakul.cz pin assignments
|
|
|
|
|
* Written by Michal Rábek <rabek33@gmail.com>
|
|
|
|
|
*
|
|
|
|
|
* Applies to the following boards:
|
|
|
|
|
*
|
|
|
|
|
* BOARD_RAMPS_S_12_EEFB Ramps S 1.2 (Hotend0, Hotend1, Fan, Bed)
|
|
|
|
|
* BOARD_RAMPS_S_12_EEEB Ramps S 1.2 (Hotend0, Hotend1, Hotend2, Bed)
|
|
|
|
|
* BOARD_RAMPS_S_12_EFFB Ramps S 1.2 (Hotend, Fan0, Fan1, Bed)
|
|
|
|
|
*
|
|
|
|
|
* Other pins_MYBOARD.h files may override these defaults
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
|
|
|
|
|
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Custom flags and defines for the build
|
|
|
|
|
//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
|
|
|
|
|
|
|
|
|
|
#ifndef BOARD_INFO_NAME
|
|
|
|
|
#define BOARD_INFO_NAME "RAMPS S 1.2"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Servos
|
|
|
|
|
//
|
|
|
|
|
#ifndef SERVO0_PIN
|
|
|
|
|
#define SERVO0_PIN 10
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef SERVO1_PIN
|
|
|
|
|
#define SERVO1_PIN 11
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef SERVO2_PIN
|
|
|
|
|
#define SERVO2_PIN 12
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef SERVO3_PIN
|
|
|
|
|
#define SERVO3_PIN 44
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Limit Switches
|
|
|
|
|
//
|
|
|
|
|
#ifndef X_STOP_PIN
|
|
|
|
|
#ifndef X_MIN_PIN
|
|
|
|
|
#define X_MIN_PIN 37
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef X_MAX_PIN
|
|
|
|
|
#define X_MAX_PIN 36
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef Y_STOP_PIN
|
|
|
|
|
#ifndef Y_MIN_PIN
|
|
|
|
|
#define Y_MIN_PIN 35
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef Y_MAX_PIN
|
|
|
|
|
#define Y_MAX_PIN 34
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef Z_STOP_PIN
|
|
|
|
|
#ifndef Z_MIN_PIN
|
|
|
|
|
#define Z_MIN_PIN 33
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef Z_MAX_PIN
|
|
|
|
|
#define Z_MAX_PIN 32
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
|
|
|
//
|
|
|
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
|
|
|
#define Z_MIN_PROBE_PIN 5
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Filament Runout Sensor
|
|
|
|
|
//
|
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
|
|
|
#define FIL_RUNOUT_PIN 44 // RAMPS_S S3 on the servos connector
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Steppers
|
|
|
|
|
//
|
|
|
|
|
#define X_STEP_PIN 17
|
|
|
|
|
#define X_DIR_PIN 16
|
|
|
|
|
#define X_ENABLE_PIN 48
|
|
|
|
|
|
|
|
|
|
#define Y_STEP_PIN 54
|
|
|
|
|
#define Y_DIR_PIN 47
|
|
|
|
|
#define Y_ENABLE_PIN 55
|
|
|
|
|
|
|
|
|
|
#ifndef Z_STEP_PIN
|
|
|
|
|
#define Z_STEP_PIN 57
|
|
|
|
|
#endif
|
|
|
|
|
#define Z_DIR_PIN 56
|
|
|
|
|
#define Z_ENABLE_PIN 62
|
|
|
|
|
|
|
|
|
|
#define E0_STEP_PIN 23
|
|
|
|
|
#define E0_DIR_PIN 22
|
|
|
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
|
|
|
|
|
|
#define E1_STEP_PIN 26
|
|
|
|
|
#define E1_DIR_PIN 25
|
|
|
|
|
#define E1_ENABLE_PIN 27
|
|
|
|
|
|
|
|
|
|
#define E2_STEP_PIN 29
|
|
|
|
|
#define E2_DIR_PIN 28
|
|
|
|
|
#define E2_ENABLE_PIN 39
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Temperature Sensors
|
|
|
|
|
//
|
|
|
|
|
#ifndef TEMP_0_PIN
|
|
|
|
|
#define TEMP_0_PIN 15 // Analog Input
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TEMP_1_PIN
|
|
|
|
|
#define TEMP_1_PIN 14 // Analog Input
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TEMP_2_PIN
|
|
|
|
|
#define TEMP_2_PIN 13 // Analog Input
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TEMP_3_PIN
|
|
|
|
|
#define TEMP_3_PIN 12 // Analog Input
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TEMP_BED_PIN
|
|
|
|
|
#define TEMP_BED_PIN 11 // Analog Input
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Heaters / Fans
|
|
|
|
|
//
|
|
|
|
|
#ifndef MOSFET_D_PIN
|
|
|
|
|
#define MOSFET_D_PIN -1
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_S_HE_0
|
|
|
|
|
#define RAMPS_S_HE_0 2
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_S_HE_1
|
|
|
|
|
#define RAMPS_S_HE_1 3
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_S_HE_2
|
|
|
|
|
#define RAMPS_S_HE_2 6
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define HEATER_BED_PIN 9
|
|
|
|
|
|
|
|
|
|
#define HEATER_0_PIN RAMPS_S_HE_0
|
|
|
|
|
|
|
|
|
|
#if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed
|
|
|
|
|
#define HEATER_1_PIN RAMPS_S_HE_1
|
|
|
|
|
#define FAN_PIN RAMPS_S_HE_2
|
|
|
|
|
#elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed
|
|
|
|
|
#define HEATER_1_PIN RAMPS_S_HE_1
|
|
|
|
|
#define HEATER_2_PIN RAMPS_S_HE_2
|
|
|
|
|
#elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed
|
|
|
|
|
#define FAN_PIN RAMPS_S_HE_1
|
|
|
|
|
#define FAN1_PIN RAMPS_S_HE_2
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Misc. Functions
|
|
|
|
|
//
|
|
|
|
|
#define SDSS 53
|
|
|
|
|
#define LED_PIN 13
|
|
|
|
|
|
|
|
|
|
#ifndef KILL_PIN
|
|
|
|
|
#define KILL_PIN 46
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef FILWIDTH_PIN
|
|
|
|
|
#define FILWIDTH_PIN 60 // Analog Input on EXTEND
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef PS_ON_PIN
|
|
|
|
|
#define PS_ON_PIN 12 // RAMPS_S S2 on the servos connector
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
|
|
|
|
|
#if NUM_SERVOS <= 1 // Prefer the servo connector
|
|
|
|
|
#define CASE_LIGHT_PIN 12 // Hardware PWM (RAMPS_S S1 on the servos connector)
|
|
|
|
|
#elif HAS_FREE_AUX2_PINS
|
|
|
|
|
#define CASE_LIGHT_PIN 44 // Hardware PWM
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// M3/M4/M5 - Spindle/Laser Control
|
|
|
|
|
//
|
|
|
|
|
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
|
|
|
|
|
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
|
|
|
|
|
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
|
|
|
|
|
#define SPINDLE_DIR_PIN 5
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// TMC software SPI
|
|
|
|
|
//
|
|
|
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
|
|
|
#ifndef TMC_SW_MOSI
|
|
|
|
|
#define TMC_SW_MOSI 51
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TMC_SW_MISO
|
|
|
|
|
#define TMC_SW_MISO 50
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef TMC_SW_SCK
|
|
|
|
|
#define TMC_SW_SCK 53
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Průša i3 MK2 Multiplexer Support
|
|
|
|
|
//
|
|
|
|
|
#ifndef E_MUX0_PIN
|
|
|
|
|
#define E_MUX0_PIN 29 // E2_STEP_PIN
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef E_MUX1_PIN
|
|
|
|
|
#define E_MUX1_PIN 28 // E2_DIR_PIN
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef E_MUX2_PIN
|
|
|
|
|
#define E_MUX2_PIN 39 // E2_ENABLE_PIN
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//////////////////////////
|
|
|
|
|
// LCDs and Controllers //
|
|
|
|
|
//////////////////////////
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// LCD Display output pins
|
|
|
|
|
//
|
|
|
|
|
#if HAS_WIRED_LCD
|
|
|
|
|
#define BEEPER_PIN 45
|
|
|
|
|
#define LCD_PINS_RS 19
|
|
|
|
|
#define LCD_PINS_ENABLE 49
|
|
|
|
|
#define LCD_PINS_D4 18
|
|
|
|
|
#define LCD_PINS_D5 30
|
|
|
|
|
#define LCD_PINS_D6 41
|
|
|
|
|
#define LCD_PINS_D7 31
|
|
|
|
|
#ifndef SD_DETECT_PIN
|
|
|
|
|
#define SD_DETECT_PIN 38
|
|
|
|
|
#endif
|
2020-11-30 03:49:42 +01:00
|
|
|
|
2020-11-21 08:47:04 +01:00
|
|
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
|
|
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-10-21 20:44:55 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// LCD Display input pins
|
|
|
|
|
//
|
|
|
|
|
#if IS_NEWPANEL
|
|
|
|
|
#define BTN_EN1 40
|
|
|
|
|
#define BTN_EN2 42
|
|
|
|
|
#define BTN_ENC 43
|
|
|
|
|
#endif
|
