Firmware2/Marlin/src/pins/mega/pins_HJC2560C_REV2.h

174 lines
5.4 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-08-21 12:05:44 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2019-08-21 12:05:44 +02:00
#pragma once
/**
* HJC2560-C Rev2.x pin assignments
*/
#ifndef __AVR_ATmega2560__
2019-08-21 12:05:44 +02:00
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define DEFAULT_MACHINE_NAME "ADIMLab Gantry v2"
2019-08-21 12:05:44 +02:00
#define BOARD_INFO_NAME "HJC2560-C"
2019-08-21 12:05:44 +02:00
//
// Servos
//
//#ifndef SERVO0_PIN
// #define SERVO0_PIN 11
//#endif
//
// Limit Switches
//
2020-03-22 03:13:19 +01:00
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
//#define EXP_STOP_PIN 28
//
// Steppers
//
2020-03-22 03:13:19 +01:00
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
2020-03-22 03:13:19 +01:00
#define Y_STEP_PIN 32
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 31
2020-03-22 03:13:19 +01:00
#define Z_STEP_PIN 35
#define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34
2020-03-22 03:13:19 +01:00
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
2020-03-22 03:13:19 +01:00
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
2020-03-22 03:13:19 +01:00
#define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
2020-03-22 03:13:19 +01:00
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
2019-08-21 12:05:44 +02:00
#define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
//
// Temperature Sensors
//
2020-03-22 03:13:19 +01:00
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
2020-03-22 03:13:19 +01:00
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
2019-08-21 12:05:44 +02:00
#ifndef FAN_PIN
2020-03-22 03:13:19 +01:00
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴如果需要则取消注释
2019-08-21 12:05:44 +02:00
#endif
//
// Misc. Functions
//
2020-03-22 03:13:19 +01:00
#define SDSS 53
#define SD_DETECT_PIN 39
//#define LED_PIN 8
2020-05-07 21:57:25 +02:00
#ifndef CASE_LIGHT_PIN
#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED如果需要PWM FAN,则需要将FAN_PIN置为7LED_PIN置为8
#endif
2019-08-21 12:05:44 +02:00
2020-03-22 03:13:19 +01:00
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
2019-08-21 12:05:44 +02:00
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
2020-03-22 03:13:19 +01:00
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
2019-08-21 12:05:44 +02:00
#endif
//
// LCD / Controller
//
2019-08-21 12:05:44 +02:00
#if HAS_SPI_LCD
2020-03-22 03:13:19 +01:00
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
2020-03-22 03:13:19 +01:00
#define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_ENABLE 15 // LCD_SDA
#define LCD_PINS_D4 14 // LCD_SCK
2019-08-21 12:05:44 +02:00
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
2020-03-22 03:13:19 +01:00
#define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
2019-08-21 12:05:44 +02:00
//#ifndef LCD_CONTRAST_PIN
// #define LCD_CONTRAST_PIN 5 // LCD_Contrast
//#endif
#ifndef FIL_RUNOUT_PIN
2020-03-22 03:13:19 +01:00
#define FIL_RUNOUT_PIN 24 // Filament runout
#endif
2019-08-21 12:05:44 +02:00
#else
2020-03-22 03:13:19 +01:00
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#endif
2020-03-22 03:13:19 +01:00
#define BTN_EN1 41
#define BTN_EN2 40
#define BTN_ENC 19
2020-03-22 03:13:19 +01:00
#define SD_DETECT_PIN 39
2019-08-21 12:05:44 +02:00
#else
2019-08-21 12:05:44 +02:00
// Buttons attached to a shift register
2020-03-22 03:13:19 +01:00
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#endif // !NEWPANEL
2019-08-21 12:05:44 +02:00
#endif // HAS_SPI_LCD