Firmware2/Marlin/watchdog.cpp

57 lines
2.0 KiB
C++
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "Marlin.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
2015-10-13 12:57:36 +02:00
// Initialize watchdog with a 4 sec interrupt time
void watchdog_init() {
#if ENABLED(WATCHDOG_RESET_MANUAL)
2015-10-13 12:57:36 +02:00
// We enable the watchdog timer, but only for the interrupt.
// Take care, as this requires the correct order of operation, with interrupts disabled. See the datasheet of any AVR chip for details.
wdt_reset();
_WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE);
_WD_CONTROL_REG = _BV(WDIE) | WDTO_4S;
#else
wdt_enable(WDTO_4S);
#endif
}
//===========================================================================
//=================================== ISR ===================================
//===========================================================================
2016-12-20 06:43:38 +01:00
// Watchdog timer interrupt, called if main program blocks >4sec and manual reset is enabled.
#if ENABLED(WATCHDOG_RESET_MANUAL)
2015-10-13 12:57:36 +02:00
ISR(WDT_vect) {
2017-06-09 17:51:23 +02:00
SERIAL_ERROR_START();
2015-10-13 12:57:36 +02:00
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
kill(PSTR("ERR:Please Reset")); //kill blocks //16 characters so it fits on a 16x2 display
while (1); //wait for user or serial reset
}
2017-05-09 19:35:43 +02:00
#endif // WATCHDOG_RESET_MANUAL
2015-10-13 12:57:36 +02:00
2017-05-09 19:35:43 +02:00
#endif // USE_WATCHDOG