Firmware2/Marlin/src/lcd/menu/menu_main.cpp

283 lines
7.3 KiB
C++
Raw Normal View History

2018-10-27 20:15:46 +02:00
/**
* Marlin 3D Printer Firmware
2019-02-12 22:06:53 +01:00
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2018-10-27 20:15:46 +02:00
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Main Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu.h"
#include "../../module/temperature.h"
2019-01-12 03:42:11 +01:00
#include "../../gcode/queue.h"
#include "../../module/printcounter.h"
#include "../../module/stepper.h"
2018-10-27 20:15:46 +02:00
2019-01-12 03:42:11 +01:00
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../feature/power_loss_recovery.h"
#endif
2018-10-27 20:15:46 +02:00
2019-01-28 05:43:13 +01:00
#if ENABLED(SDSUPPORT)
#include "../../sd/cardreader.h"
#endif
2019-02-12 22:55:47 +01:00
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../feature/host_actions.h"
#endif
#define MACHINE_CAN_STOP (EITHER(SDSUPPORT, HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL))
#define MACHINE_CAN_PAUSE (ANY(SDSUPPORT, HOST_PROMPT_SUPPORT, PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE))
2018-11-27 21:40:40 +01:00
#if MACHINE_CAN_PAUSE
2019-02-12 22:55:47 +01:00
void lcd_pause_job() {
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.enabled) recovery.save(true, false);
#endif
2018-10-27 20:15:46 +02:00
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("UI Pause"), PSTR("Resume"));
#endif
2019-01-12 03:42:11 +01:00
#if ENABLED(PARK_HEAD_ON_PAUSE)
lcd_pause_show_message(PAUSE_MESSAGE_PAUSING, PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress
enqueue_and_echo_commands_P(PSTR("M25 P\nM24"));
#elif ENABLED(SDSUPPORT)
enqueue_and_echo_commands_P(PSTR("M25"));
#elif defined(ACTION_ON_PAUSE)
host_action_pause();
#endif
planner.synchronize();
}
void lcd_resume() {
#if ENABLED(SDSUPPORT)
if (card.isPaused()) enqueue_and_echo_commands_P(PSTR("M24"));
#endif
#ifdef ACTION_ON_RESUME
host_action_resume();
#endif
}
#endif // MACHINE_CAN_PAUSE
#if MACHINE_CAN_STOP
void lcd_abort_job() {
#if ENABLED(SDSUPPORT)
wait_for_heatup = wait_for_user = false;
card.flag.abort_sd_printing = true;
#endif
#ifdef ACTION_ON_CANCEL
host_action_cancel();
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("UI Abort"));
#endif
ui.set_status_P(PSTR(MSG_PRINT_ABORTED), -1);
ui.return_to_status();
}
void menu_abort_confirm() {
START_MENU();
MENU_BACK(MSG_MAIN);
MENU_ITEM(function, MSG_STOP_PRINT, lcd_abort_job);
END_MENU();
}
#endif // MACHINE_CAN_STOP
2018-10-27 20:15:46 +02:00
2019-02-01 02:10:52 +01:00
#if ENABLED(PRUSA_MMU2)
2019-02-07 00:38:46 +01:00
#include "../../lcd/menu/menu_mmu2.h"
2019-02-01 02:10:52 +01:00
#endif
2018-10-27 20:15:46 +02:00
void menu_tune();
2018-10-27 23:45:37 +02:00
void menu_motion();
2018-10-27 20:15:46 +02:00
void menu_temperature();
void menu_configuration();
2018-10-28 09:05:17 +01:00
void menu_user();
2018-10-27 20:15:46 +02:00
void menu_temp_e0_filament_change();
void menu_change_filament();
void menu_info();
void menu_led();
#if ENABLED(MIXING_EXTRUDER)
void menu_mixer();
#endif
2019-02-12 22:58:56 +01:00
#if HAS_SERVICE_INTERVALS && ENABLED(PRINTCOUNTER)
#if SERVICE_INTERVAL_1 > 0
void menu_service1();
#endif
#if SERVICE_INTERVAL_2 > 0
void menu_service2();
#endif
#if SERVICE_INTERVAL_3 > 0
void menu_service3();
#endif
#endif
2018-10-27 20:15:46 +02:00
void menu_main() {
START_MENU();
MENU_BACK(MSG_WATCH);
2019-02-04 13:11:17 +01:00
const bool busy = printer_busy()
2019-02-03 00:08:44 +01:00
#if ENABLED(SDSUPPORT)
2019-02-04 13:11:17 +01:00
, card_detected = card.isDetected()
, card_open = card_detected && card.isFileOpen()
2019-02-03 00:08:44 +01:00
#endif
;
2019-01-12 03:42:11 +01:00
if (busy) {
#if MACHINE_CAN_PAUSE
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_pause_job);
#endif
#if MACHINE_CAN_STOP
2019-01-28 05:43:13 +01:00
MENU_ITEM(submenu, MSG_STOP_PRINT, menu_abort_confirm);
2019-01-12 03:42:11 +01:00
#endif
MENU_ITEM(submenu, MSG_TUNE, menu_tune);
}
else {
#if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
#endif
2019-02-03 00:08:44 +01:00
if (card_detected) {
if (!card_open) {
MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21")); // SD-card changed by user
#endif
}
}
else {
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually init SD-card
#endif
MENU_ITEM(function, MSG_NO_CARD, NULL);
}
#endif // !HAS_ENCODER_WHEEL && SDSUPPORT
#if MACHINE_CAN_PAUSE
const bool paused = (print_job_timer.isPaused()
#if ENABLED(SDSUPPORT)
|| card.isPaused()
#endif
);
if (paused) MENU_ITEM(function, MSG_RESUME_PRINT, lcd_resume);
2019-02-04 10:02:44 +01:00
#endif
2019-01-23 22:48:56 +01:00
2018-10-27 23:45:37 +02:00
MENU_ITEM(submenu, MSG_MOTION, menu_motion);
}
2019-02-01 02:10:52 +01:00
MENU_ITEM(submenu, MSG_TEMPERATURE, menu_temperature);
#if ENABLED(MIXING_EXTRUDER)
MENU_ITEM(submenu, MSG_MIXER, menu_mixer);
#endif
#if ENABLED(MMU2_MENUS)
if (!busy) MENU_ITEM(submenu, MSG_MMU2_MENU, menu_mmu2);
#endif
2018-10-27 20:15:46 +02:00
MENU_ITEM(submenu, MSG_CONFIGURATION, menu_configuration);
#if ENABLED(CUSTOM_USER_MENUS)
2018-10-28 09:05:17 +01:00
MENU_ITEM(submenu, MSG_USER_MENU, menu_user);
2018-10-27 20:15:46 +02:00
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_temp_e0_filament_change);
#else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_change_filament);
#endif
#endif
#if ENABLED(LCD_INFO_MENU)
MENU_ITEM(submenu, MSG_INFO_MENU, menu_info);
#endif
#if ENABLED(LED_CONTROL_MENU)
MENU_ITEM(submenu, MSG_LED_CONTROL, menu_led);
#endif
//
// Switch power on/off
//
#if HAS_POWER_SWITCH
if (powersupply_on)
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
else
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
#endif
#if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
2019-01-14 00:59:32 +01:00
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
2019-01-14 00:59:32 +01:00
#endif
2018-10-27 20:15:46 +02:00
2019-02-03 00:08:44 +01:00
if (card_detected) {
if (!card_open) {
MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21")); // SD-card changed by user
#endif
}
2019-01-12 03:42:11 +01:00
}
else {
#if !PIN_EXISTS(SD_DETECT)
2019-01-14 00:59:32 +01:00
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually init SD-card
2019-01-12 03:42:11 +01:00
#endif
2019-01-14 00:59:32 +01:00
MENU_ITEM(function, MSG_NO_CARD, NULL);
2019-01-12 03:42:11 +01:00
}
#endif // HAS_ENCODER_WHEEL && SDSUPPORT
2019-01-14 00:59:32 +01:00
2019-02-12 22:58:56 +01:00
#if HAS_SERVICE_INTERVALS && ENABLED(PRINTCOUNTER)
#if SERVICE_INTERVAL_1 > 0
MENU_ITEM(submenu, SERVICE_NAME_1, menu_service1);
#endif
#if SERVICE_INTERVAL_2 > 0
MENU_ITEM(submenu, SERVICE_NAME_2, menu_service2);
#endif
#if SERVICE_INTERVAL_3 > 0
MENU_ITEM(submenu, SERVICE_NAME_3, menu_service3);
#endif
#endif
2018-10-27 20:15:46 +02:00
END_MENU();
}
#endif // HAS_LCD_MENU