Move SF_ARC_FIX option

This commit is contained in:
Scott Lahteine 2020-10-04 15:45:13 -05:00 committed by Scott Lahteine
parent af4c2dab8d
commit 01c161d380
2 changed files with 3 additions and 10 deletions

View File

@ -2304,9 +2304,6 @@
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
//#define TEMP_STAT_LEDS //#define TEMP_STAT_LEDS
// SkeinForge sends the wrong arc G-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
@ -2392,17 +2389,12 @@
#define PRINTER_EVENT_LEDS #define PRINTER_EVENT_LEDS
#endif #endif
/**
* R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas
*/
/** /**
* Number of servos * Number of servos
* *
* For some servo-related options NUM_SERVOS will be set automatically. * For some servo-related options NUM_SERVOS will be set automatically.
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Leave undefined or set to 0 to entirely disable the servo subsystem. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
@ -2414,5 +2406,5 @@
// Only power servos during movement, otherwise leave off to prevent jitter // Only power servos during movement, otherwise leave off to prevent jitter
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES

View File

@ -1768,6 +1768,7 @@
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
//#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure
#endif #endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.