Header and pins changes to support 5 extruders
This commit is contained in:
Scott Lahteine
parent
2a84122edd
commit
04050237f0
|
|
@ -113,6 +113,8 @@ void manage_inactivity(bool ignore_stepper_queue = false);
|
|||
#define disable_e2() NOOP
|
||||
#define enable_e3() NOOP
|
||||
#define disable_e3() NOOP
|
||||
#define enable_e4() NOOP
|
||||
#define disable_e4() NOOP
|
||||
|
||||
#else // !MIXING_EXTRUDER
|
||||
|
||||
|
|
@ -148,6 +150,14 @@ void manage_inactivity(bool ignore_stepper_queue = false);
|
|||
#define disable_e3() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 4 && HAS_E4_ENABLE
|
||||
#define enable_e4() E4_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_e4() E4_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_e4() NOOP
|
||||
#define disable_e4() NOOP
|
||||
#endif
|
||||
|
||||
#endif // !MIXING_EXTRUDER
|
||||
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
|
|
|
|||
|
|
@ -106,6 +106,8 @@ enum TempState {
|
|||
MeasureTemp_2,
|
||||
PrepareTemp_3,
|
||||
MeasureTemp_3,
|
||||
PrepareTemp_4,
|
||||
MeasureTemp_4,
|
||||
Prepare_FILWIDTH,
|
||||
Measure_FILWIDTH,
|
||||
StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle
|
||||
|
|
|
|||
|
|
@ -268,22 +268,27 @@
|
|||
#define MSG_H2 "2"
|
||||
#define MSG_H3 "3"
|
||||
#define MSG_H4 "4"
|
||||
#define MSG_H5 "5"
|
||||
#define MSG_N1 " 1"
|
||||
#define MSG_N2 " 2"
|
||||
#define MSG_N3 " 3"
|
||||
#define MSG_N4 " 4"
|
||||
#define MSG_N5 " 5"
|
||||
#define MSG_E1 "E1"
|
||||
#define MSG_E2 "E2"
|
||||
#define MSG_E3 "E3"
|
||||
#define MSG_E4 "E4"
|
||||
#define MSG_E5 "E5"
|
||||
#define MSG_MOVE_E1 "1"
|
||||
#define MSG_MOVE_E2 "2"
|
||||
#define MSG_MOVE_E3 "3"
|
||||
#define MSG_MOVE_E4 "4"
|
||||
#define MSG_MOVE_E5 "5"
|
||||
#define MSG_DIAM_E1 " 1"
|
||||
#define MSG_DIAM_E2 " 2"
|
||||
#define MSG_DIAM_E3 " 3"
|
||||
#define MSG_DIAM_E4 " 4"
|
||||
#define MSG_DIAM_E5 " 5"
|
||||
|
||||
#include INCLUDE_LANGUAGE
|
||||
|
||||
|
|
|
|||
|
|
@ -128,10 +128,12 @@
|
|||
|
||||
#define CEILING(x,y) (((x) + (y) - 1) / (y))
|
||||
|
||||
#define MIN3(a, b, c) min(min(a, b), c)
|
||||
#define MIN4(a, b, c, d) min(min(a, b), min(c, d))
|
||||
#define MAX3(a, b, c) max(max(a, b), c)
|
||||
#define MAX4(a, b, c, d) max(max(a, b), max(c, d))
|
||||
#define MIN3(a, b, c) min(min(a, b), c)
|
||||
#define MIN4(a, b, c, d) min(MIN3(a, b, c), d)
|
||||
#define MIN5(a, b, c, d, e) min(MIN4(a, b, c, d), e)
|
||||
#define MAX3(a, b, c) max(max(a, b), c)
|
||||
#define MAX4(a, b, c, d) max(MAX3(a, b, c), d)
|
||||
#define MAX5(a, b, c, d, e) max(MAX4(a, b, c, d), e)
|
||||
|
||||
#define UNEAR_ZERO(x) ((x) < 0.000001)
|
||||
#define NEAR_ZERO(x) WITHIN(x, -0.000001, 0.000001)
|
||||
|
|
|
|||
|
|
@ -252,6 +252,9 @@
|
|||
#ifndef TEMP_3_PIN
|
||||
#define TEMP_3_PIN -1
|
||||
#endif
|
||||
#ifndef TEMP_4_PIN
|
||||
#define TEMP_4_PIN -1
|
||||
#endif
|
||||
#ifndef TEMP_BED_PIN
|
||||
#define TEMP_BED_PIN -1
|
||||
#endif
|
||||
|
|
@ -279,7 +282,7 @@
|
|||
#endif
|
||||
|
||||
#ifndef MAX_EXTRUDERS
|
||||
#define MAX_EXTRUDERS 4
|
||||
#define MAX_EXTRUDERS 5
|
||||
#endif
|
||||
|
||||
// Marlin needs to account for pins that equal -1
|
||||
|
|
@ -320,10 +323,10 @@
|
|||
#if EXTRUDERS > 4
|
||||
#undef _E4_PINS
|
||||
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN,
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
|
||||
#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
|
||||
#define _H1_PINS
|
||||
|
|
@ -343,9 +346,9 @@
|
|||
#if HOTENDS > 4
|
||||
#undef _H4_PINS
|
||||
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif // HOTENDS > 4
|
||||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#elif ENABLED(MIXING_EXTRUDER)
|
||||
#undef _E1_PINS
|
||||
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN,
|
||||
|
|
@ -358,10 +361,10 @@
|
|||
#if MIXING_STEPPERS > 4
|
||||
#undef _E4_PINS
|
||||
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN,
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif // MIXING_STEPPERS > 4
|
||||
#endif // MIXING_STEPPERS > 3
|
||||
#endif // MIXING_STEPPERS > 2
|
||||
#endif // MIXING_STEPPERS > 1
|
||||
|
||||
#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN),
|
||||
|
||||
|
|
|
|||
|
|
@ -24,6 +24,10 @@
|
|||
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
|
||||
*/
|
||||
|
||||
#if HOTENDS > 5 || E_STEPPERS > 5
|
||||
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Azteeg X3 Pro"
|
||||
|
||||
#include "pins_RAMPS.h"
|
||||
|
|
|
|||
|
|
@ -388,6 +388,10 @@
|
|||
#define E_STEP_WRITE(v) E0_STEP_WRITE(v)
|
||||
#define NORM_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? INVERT_E0_DIR : !INVERT_E0_DIR)
|
||||
#define REV_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? !INVERT_E0_DIR : INVERT_E0_DIR)
|
||||
#elif EXTRUDERS > 4
|
||||
#define E_STEP_WRITE(v) { switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } }
|
||||
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }
|
||||
#define REV_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(INVERT_E4_DIR); } }
|
||||
#elif EXTRUDERS > 3
|
||||
#define E_STEP_WRITE(v) { switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); } }
|
||||
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }
|
||||
|
|
@ -408,7 +412,11 @@
|
|||
#endif
|
||||
#elif ENABLED(MIXING_EXTRUDER)
|
||||
#define E_STEP_WRITE(v) NOOP /* not used for mixing extruders! */
|
||||
#if MIXING_STEPPERS > 3
|
||||
#if MIXING_STEPPERS > 4
|
||||
#define En_STEP_WRITE(n,v) { switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } }
|
||||
#define NORM_E_DIR() { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); E2_DIR_WRITE(!INVERT_E2_DIR); E3_DIR_WRITE(!INVERT_E3_DIR); E4_DIR_WRITE(!INVERT_E4_DIR); }
|
||||
#define REV_E_DIR() { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); E2_DIR_WRITE( INVERT_E2_DIR); E3_DIR_WRITE( INVERT_E3_DIR); E4_DIR_WRITE( INVERT_E4_DIR); }
|
||||
#elif MIXING_STEPPERS > 3
|
||||
#define En_STEP_WRITE(n,v) { switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); } }
|
||||
#define NORM_E_DIR() { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); E2_DIR_WRITE(!INVERT_E2_DIR); E3_DIR_WRITE(!INVERT_E3_DIR); }
|
||||
#define REV_E_DIR() { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); E2_DIR_WRITE( INVERT_E2_DIR); E3_DIR_WRITE( INVERT_E3_DIR); }
|
||||
|
|
|
|||
|
|
@ -39,6 +39,10 @@
|
|||
#define HEATER_3_RAW_HI_TEMP 16383
|
||||
#define HEATER_3_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORHEATER_4 == 20)
|
||||
#define HEATER_4_RAW_HI_TEMP 16383
|
||||
#define HEATER_4_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if (THERMISTORBED == 20)
|
||||
#define HEATER_BED_RAW_HI_TEMP 16383
|
||||
#define HEATER_BED_RAW_LO_TEMP 0
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
|
||||
#define OVERSAMPLENR 16
|
||||
|
||||
#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORBED == n)
|
||||
#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n)
|
||||
|
||||
// Pt1000 and Pt100 handling
|
||||
//
|
||||
|
|
@ -168,6 +168,16 @@
|
|||
#define HEATER_3_TEMPTABLE_LEN 0
|
||||
#endif
|
||||
|
||||
#ifdef THERMISTORHEATER_4
|
||||
#define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
|
||||
#define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
|
||||
#elif defined(HEATER_4_USES_THERMISTOR)
|
||||
#error "No heater 4 thermistor table specified"
|
||||
#else
|
||||
#define HEATER_4_TEMPTABLE NULL
|
||||
#define HEATER_4_TEMPTABLE_LEN 0
|
||||
#endif
|
||||
|
||||
#ifdef THERMISTORBED
|
||||
#define BEDTEMPTABLE TT_NAME(THERMISTORBED)
|
||||
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user