MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Bring some configs up to date

Browse Source
This commit is contained in:
Scott Lahteine 2018-01-11 01:10:00 -06:00
parent d7fd78cb91
commit 048486390e
5 changed files with 6 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration.h
View File

@ -1642,11 +1642,10 @@
//#define CR10_STOCKDISPLAY
//
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
//
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

3
Marlin/src/config/default/Configuration.h
View File

@ -1642,11 +1642,10 @@
//#define CR10_STOCKDISPLAY
//
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
//
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

5
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine
/**
* Select which serial port on the board will be used for communication with the host.
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
*
@ -1627,11 +1627,10 @@
//#define CR10_STOCKDISPLAY
//
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
//
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

2
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine
/**
* Select which serial port on the board will be used for communication with the host.
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
*

2
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine
/**
* Select which serial port on the board will be used for communication with the host.
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
*