From 05d2bb0df595273644eba176160fc8c4f5f3fbd2 Mon Sep 17 00:00:00 2001 From: qwewer0 <57561110+qwewer0@users.noreply.github.com> Date: Sat, 22 Aug 2020 09:04:28 +0200 Subject: [PATCH] Change XY_PROBE_SPEED format to (x*60) (#18997) --- Marlin/Configuration.h | 18 +++++++++--------- Marlin/Configuration_adv.h | 20 ++++++++++---------- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 2b36f883cc..2639bcd97b 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -235,8 +235,8 @@ #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple + #define MPE_FAST_SPEED 9000 // (mm/min) Speed for travel before last distance point + #define MPE_SLOW_SPEED 4500 // (mm/min) Speed for last distance travel to park and couple #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling @@ -284,8 +284,8 @@ #if ENABLED(PRIME_BEFORE_REMOVE) #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate + #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/min) Extruder prime feedrate + #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/min) Extruder retract feedrate #endif #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching @@ -999,13 +999,13 @@ // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 +// X and Y axis travel speed (mm/min) between probes +#define XY_PROBE_SPEED (133*60) -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Feedrate (mm/m) for the "accurate" probe of each point +// Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) /** @@ -1399,7 +1399,7 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Homing speeds (mm/m) +// Homing speeds (mm/min) #define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_Z (4*60) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index b27d7c79ea..7d9182ad9b 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -339,7 +339,7 @@ #if ENABLED(EXTRUDER_RUNOUT_PREVENT) #define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) + #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min) #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) #endif @@ -883,7 +883,7 @@ // increments while checking for the contact to be broken. #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) + #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/min) #endif #endif #endif @@ -1025,7 +1025,7 @@ // @section lcd #if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/m) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if ENABLED(ULTIPANEL) #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1985,13 +1985,13 @@ // Load / Unload #define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode) - #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/m) (Unloading) - #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/m) (On SINGLENOZZLE or Bowden loading must be slowed down) + #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/min) (Unloading) + #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down) // Longer prime to clean out a SINGLENOZZLE #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length - #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/m) Extra priming feedrate - #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/m) Retract before cooling for less stringing, better wipe, etc. + #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate + #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/min) Retract before cooling for less stringing, better wipe, etc. // Cool after prime to reduce stringing #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip @@ -2027,7 +2027,7 @@ //#define TOOLCHANGE_PARK #if ENABLED(TOOLCHANGE_PARK) #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) + #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/min) //#define TOOLCHANGE_PARK_X_ONLY // X axis only move //#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move #endif @@ -3151,7 +3151,7 @@ //#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. // Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) +//#define G0_FEEDRATE 3000 // (mm/min) #ifdef G0_FEEDRATE //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif @@ -3468,7 +3468,7 @@ #if ENABLED(PRUSA_MMU2_S_MODE) #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) - #define MMU2_CAN_LOAD_FEEDRATE 800 // (mm/m) + #define MMU2_CAN_LOAD_FEEDRATE 800 // (mm/min) #define MMU2_CAN_LOAD_SEQUENCE \ { 0.1, MMU2_CAN_LOAD_FEEDRATE }, \ { 60.0, MMU2_CAN_LOAD_FEEDRATE }, \