Suppress redundant serial errors

This commit is contained in:
Scott Lahteine 2021-03-18 22:49:04 -05:00 committed by Scott Lahteine
parent a8f8201c90
commit 05d7d37872
4 changed files with 28 additions and 17 deletions

View File

@ -84,10 +84,13 @@
#define MYSERIAL1 UsbSerial #define MYSERIAL1 UsbSerial
#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS) #elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
#define MYSERIAL1 MSERIAL(SERIAL_PORT) #define MYSERIAL1 MSERIAL(SERIAL_PORT)
#elif NUM_UARTS == 5
#error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else #else
#error "SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration." #define MYSERIAL1 MSERIAL(1) // dummy port
#if NUM_UARTS == 5
#error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
#error "SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif #endif
#ifdef SERIAL_PORT_2 #ifdef SERIAL_PORT_2
@ -95,10 +98,13 @@
#define MYSERIAL2 UsbSerial #define MYSERIAL2 UsbSerial
#elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS) #elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2) #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#elif NUM_UARTS == 5
#error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
#else #else
#error "SERIAL_PORT_2 must be -1 or from 1 to 3. Please update your configuration." #define MYSERIAL2 MSERIAL(1) // dummy port
#if NUM_UARTS == 5
#error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
#else
#error "SERIAL_PORT_2 must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif #endif
#endif #endif
@ -107,10 +113,13 @@
#define MMU2_SERIAL UsbSerial #define MMU2_SERIAL UsbSerial
#elif WITHIN(MMU2_SERIAL_PORT, 1, NUM_UARTS) #elif WITHIN(MMU2_SERIAL_PORT, 1, NUM_UARTS)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#elif NUM_UARTS == 5
#error "MMU2_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else #else
#error "MMU2_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration." #define MMU2_SERIAL MSERIAL(1) // dummy port
#if NUM_UARTS == 5
#error "MMU2_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
#error "MMU2_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif #endif
#endif #endif
@ -119,10 +128,13 @@
#define LCD_SERIAL UsbSerial #define LCD_SERIAL UsbSerial
#elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS) #elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT) #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#elif NUM_UARTS == 5
#error "LCD_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else #else
#error "LCD_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration." #define LCD_SERIAL MSERIAL(1) // dummy port
#if NUM_UARTS == 5
#error "LCD_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
#error "LCD_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif #endif
#if HAS_DGUS_LCD #if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite() #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()

View File

@ -733,7 +733,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// SDCard File listing // SDCard File listing
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.DGUSLCD_SD_FileSelected, nullptr), VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.DGUSLCD_SD_FileSelected, nullptr),
VPHELPER(VP_SD_ScrollEvent, nullptr, ScreenHandler.DGUSLCD_SD_ScrollFilelist, nullptr), VPHELPER(VP_SD_ScrollEvent, nullptr, ScreenHandler.DGUSLCD_SD_ScrollFilelist, nullptr),
@ -760,7 +760,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_OFFSET_Y, &probe.offset.y, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), VPHELPER(VP_OFFSET_Y, &probe.offset.y, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_OFFSET_Z, &probe.offset.z, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), VPHELPER(VP_OFFSET_Z, &probe.offset.z, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
#endif #endif
#else #else
VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.PrintReturn, nullptr), VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.PrintReturn, nullptr),
#endif #endif

View File

@ -158,7 +158,6 @@ public:
static void GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_ptr); static void GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_ptr);
#endif #endif
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Callback for VP "Display wants to change screen when there is a SD card" // Callback for VP "Display wants to change screen when there is a SD card"
static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr);
@ -184,7 +183,7 @@ public:
static void SDCardError(); static void SDCardError();
// Marlin informed us about SD print completion. // Marlin informed us about SD print completion.
static void SDPrintingFinished(); static void SDPrintingFinished();
#else #else
static void PrintReturn(DGUS_VP_Variable &var, void *val_ptr); static void PrintReturn(DGUS_VP_Variable &var, void *val_ptr);
#endif #endif

View File

@ -26,7 +26,7 @@ opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
CUTTER_POWER_UNIT PERCENT \ CUTTER_POWER_UNIT PERCENT \
SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN \ SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN \
TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13 TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER
exec_test $1 $2 "BigTreeTech SKR Pro | Laser (Percent) | Cooling | LCD" "$3" exec_test $1 $2 "BigTreeTech SKR Pro | Laser (Percent) | Cooling | LCD" "$3"
# clean up # clean up