First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
This commit is contained in:
parent
539f3b3fe4
commit
06b58a9c4f
@ -181,15 +181,14 @@
|
|||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // no z because of layer shift.
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // no z because of layer shift.
|
||||||
|
|
||||||
// The hardware watchdog should halt the Microcontroller, in case the firmware gets stuck somewhere. However:
|
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
// the Watchdog is not working well, so please only enable this for testing
|
#define USE_WATCHDOG
|
||||||
// this enables the watchdog interrupt.
|
|
||||||
//#define USE_WATCHDOG
|
#ifdef USE_WATCHDOG
|
||||||
//#ifdef USE_WATCHDOG
|
// you cannot watchdog reboot on Arduino mega2560 due to a bug in he bootloader. Hence we need to ask the user to reset.
|
||||||
// you cannot reboot on a mega2560 due to a bug in he bootloader. Hence, you have to reset manually, and this is done hereby:
|
// THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
||||||
//#define RESET_MANUAL
|
//#define RESET_MANUAL
|
||||||
//#define WATCHDOG_TIMEOUT 4 //seconds
|
#endif
|
||||||
//#endif
|
|
||||||
|
|
||||||
// extruder advance constant (s2/mm3)
|
// extruder advance constant (s2/mm3)
|
||||||
//
|
//
|
||||||
@ -214,7 +213,7 @@
|
|||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
#define N_ARC_CORRECTION 25
|
#define N_ARC_CORRECTION 25
|
||||||
|
|
||||||
const int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
|
@ -6,14 +6,6 @@
|
|||||||
#include "temperature.h"
|
#include "temperature.h"
|
||||||
//#include <EEPROM.h>
|
//#include <EEPROM.h>
|
||||||
|
|
||||||
int plaPreheatHotendTemp;
|
|
||||||
int plaPreheatHPBTemp;
|
|
||||||
int plaPreheatFanSpeed;
|
|
||||||
|
|
||||||
int absPreheatHotendTemp;
|
|
||||||
int absPreheatHPBTemp;
|
|
||||||
int absPreheatFanSpeed;
|
|
||||||
|
|
||||||
template <class T> int EEPROM_writeAnything(int &ee, const T& value)
|
template <class T> int EEPROM_writeAnything(int &ee, const T& value)
|
||||||
{
|
{
|
||||||
const byte* p = (const byte*)(const void*)&value;
|
const byte* p = (const byte*)(const void*)&value;
|
||||||
|
@ -1,4 +1,3 @@
|
|||||||
#define __PROG_TYPES_COMPAT__
|
|
||||||
#include "LiquidCrystalRus.h"
|
#include "LiquidCrystalRus.h"
|
||||||
|
|
||||||
#include <stdio.h>
|
#include <stdio.h>
|
||||||
@ -14,7 +13,7 @@
|
|||||||
|
|
||||||
// it is a russian alphabet translation
|
// it is a russian alphabet translation
|
||||||
// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
|
// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
|
||||||
const PROGMEM prog_uchar utf_recode[] =
|
const PROGMEM uint8_t utf_recode[] =
|
||||||
{ 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
|
{ 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
|
||||||
0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
|
0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
|
||||||
0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,
|
0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,
|
||||||
|
@ -52,22 +52,11 @@
|
|||||||
#define MYSERIAL MSerial
|
#define MYSERIAL MSerial
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//this is a unfinsihed attemp to removes a lot of warning messages, see:
|
|
||||||
// http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=57011
|
|
||||||
//typedef char prog_char PROGMEM;
|
|
||||||
// //#define PSTR (s ) ((const PROGMEM char *)(s))
|
|
||||||
// //# define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];}))
|
|
||||||
// //#define MYPGM(s) ((const prog_char *g PROGMEM=s))
|
|
||||||
#define MYPGM(s) PSTR(s)
|
|
||||||
//#define MYPGM(s) (__extension__({static char __c[] __attribute__((__progmem__)) = (s); &__c[0];})) //This is the normal behaviour
|
|
||||||
//#define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) //this does not work but hides the warnings
|
|
||||||
|
|
||||||
|
|
||||||
#define SERIAL_PROTOCOL(x) MYSERIAL.print(x);
|
#define SERIAL_PROTOCOL(x) MYSERIAL.print(x);
|
||||||
#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y);
|
#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y);
|
||||||
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(MYPGM(x));
|
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x));
|
||||||
#define SERIAL_PROTOCOLLN(x) {MYSERIAL.print(x);MYSERIAL.write('\n');}
|
#define SERIAL_PROTOCOLLN(x) {MYSERIAL.print(x);MYSERIAL.write('\n');}
|
||||||
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(MYPGM(x));MYSERIAL.write('\n');}
|
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(PSTR(x));MYSERIAL.write('\n');}
|
||||||
|
|
||||||
|
|
||||||
const char errormagic[] PROGMEM ="Error:";
|
const char errormagic[] PROGMEM ="Error:";
|
||||||
@ -92,7 +81,6 @@ void serial_echopair_P(const char *s_P, unsigned long v);
|
|||||||
|
|
||||||
|
|
||||||
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
|
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
|
||||||
#define SerialprintPGM(x) serialprintPGM(MYPGM(x))
|
|
||||||
FORCE_INLINE void serialprintPGM(const char *str)
|
FORCE_INLINE void serialprintPGM(const char *str)
|
||||||
{
|
{
|
||||||
char ch=pgm_read_byte(str);
|
char ch=pgm_read_byte(str);
|
||||||
@ -197,6 +185,9 @@ extern float min_pos[3];
|
|||||||
extern float max_pos[3];
|
extern float max_pos[3];
|
||||||
extern unsigned char FanSpeed;
|
extern unsigned char FanSpeed;
|
||||||
|
|
||||||
|
extern unsigned long starttime;
|
||||||
|
extern unsigned long stoptime;
|
||||||
|
|
||||||
// Handling multiple extruders pins
|
// Handling multiple extruders pins
|
||||||
extern uint8_t active_extruder;
|
extern uint8_t active_extruder;
|
||||||
|
|
||||||
|
1837
Marlin/Marlin.pde
1837
Marlin/Marlin.pde
File diff suppressed because it is too large
Load Diff
1865
Marlin/Marlin_main.cpp
Normal file
1865
Marlin/Marlin_main.cpp
Normal file
File diff suppressed because it is too large
Load Diff
@ -55,13 +55,16 @@ int16_t SdFile::write(const void* buf, uint16_t nbyte) {
|
|||||||
* Use writeError to check for errors.
|
* Use writeError to check for errors.
|
||||||
*/
|
*/
|
||||||
#if ARDUINO >= 100
|
#if ARDUINO >= 100
|
||||||
size_t SdFile::write(uint8_t b)
|
size_t SdFile::write(uint8_t b)
|
||||||
|
{
|
||||||
|
return SdBaseFile::write(&b, 1);
|
||||||
|
}
|
||||||
#else
|
#else
|
||||||
void SdFile::write(uint8_t b)
|
void SdFile::write(uint8_t b)
|
||||||
#endif
|
|
||||||
{
|
{
|
||||||
SdBaseFile::write(&b, 1);
|
SdBaseFile::write(&b, 1);
|
||||||
}
|
}
|
||||||
|
#endif
|
||||||
//------------------------------------------------------------------------------
|
//------------------------------------------------------------------------------
|
||||||
/** Write a string to a file. Used by the Arduino Print class.
|
/** Write a string to a file. Used by the Arduino Print class.
|
||||||
* \param[in] str Pointer to the string.
|
* \param[in] str Pointer to the string.
|
||||||
|
@ -191,8 +191,7 @@ void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exi
|
|||||||
// have to use intersection_distance() to calculate when to abort acceleration and start braking
|
// have to use intersection_distance() to calculate when to abort acceleration and start braking
|
||||||
// in order to reach the final_rate exactly at the end of this block.
|
// in order to reach the final_rate exactly at the end of this block.
|
||||||
if (plateau_steps < 0) {
|
if (plateau_steps < 0) {
|
||||||
accelerate_steps = ceil(
|
accelerate_steps = ceil(intersection_distance(block->initial_rate, block->final_rate, acceleration, block->step_event_count));
|
||||||
intersection_distance(block->initial_rate, block->final_rate, acceleration, block->step_event_count));
|
|
||||||
accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off
|
accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off
|
||||||
accelerate_steps = min(accelerate_steps,block->step_event_count);
|
accelerate_steps = min(accelerate_steps,block->step_event_count);
|
||||||
plateau_steps = 0;
|
plateau_steps = 0;
|
||||||
|
@ -145,20 +145,20 @@ static volatile bool temp_meas_ready = false;
|
|||||||
|
|
||||||
void PID_autotune(float temp, int extruder, int ncycles)
|
void PID_autotune(float temp, int extruder, int ncycles)
|
||||||
{
|
{
|
||||||
float input;
|
float input = 0.0;
|
||||||
int cycles=0;
|
int cycles=0;
|
||||||
bool heating = true;
|
bool heating = true;
|
||||||
|
|
||||||
unsigned long temp_millis = millis();
|
unsigned long temp_millis = millis();
|
||||||
unsigned long t1=temp_millis;
|
unsigned long t1=temp_millis;
|
||||||
unsigned long t2=temp_millis;
|
unsigned long t2=temp_millis;
|
||||||
long t_high;
|
long t_high = 0;
|
||||||
long t_low;
|
long t_low = 0;
|
||||||
|
|
||||||
long bias, d;
|
long bias, d;
|
||||||
float Ku, Tu;
|
float Ku, Tu;
|
||||||
float Kp, Ki, Kd;
|
float Kp, Ki, Kd;
|
||||||
float max, min;
|
float max = 0, min = 10000;
|
||||||
|
|
||||||
if ((extruder > EXTRUDERS)
|
if ((extruder > EXTRUDERS)
|
||||||
#if (TEMP_BED_PIN <= -1)
|
#if (TEMP_BED_PIN <= -1)
|
||||||
@ -315,17 +315,15 @@ int getHeaterPower(int heater) {
|
|||||||
|
|
||||||
void manage_heater()
|
void manage_heater()
|
||||||
{
|
{
|
||||||
|
|
||||||
#ifdef USE_WATCHDOG
|
|
||||||
wd_reset();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
float pid_input;
|
float pid_input;
|
||||||
float pid_output;
|
float pid_output;
|
||||||
|
|
||||||
if(temp_meas_ready != true) //better readability
|
if(temp_meas_ready != true) //better readability
|
||||||
return;
|
return;
|
||||||
|
|
||||||
|
//Reset the watchdog after we know we have a temperature measurement.
|
||||||
|
watchdog_reset();
|
||||||
|
|
||||||
CRITICAL_SECTION_START;
|
CRITICAL_SECTION_START;
|
||||||
temp_meas_ready = false;
|
temp_meas_ready = false;
|
||||||
CRITICAL_SECTION_END;
|
CRITICAL_SECTION_END;
|
||||||
@ -548,7 +546,6 @@ int temp2analogBed(int celsius) {
|
|||||||
#elif defined BED_USES_AD595
|
#elif defined BED_USES_AD595
|
||||||
return lround(((celsius-TEMP_SENSOR_AD595_OFFSET)/TEMP_SENSOR_AD595_GAIN) * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
|
return lround(((celsius-TEMP_SENSOR_AD595_OFFSET)/TEMP_SENSOR_AD595_GAIN) * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
|
||||||
#else
|
#else
|
||||||
#warning No heater-type defined for the bed.
|
|
||||||
return 0;
|
return 0;
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
@ -625,7 +622,6 @@ float analog2tempBed(int raw) {
|
|||||||
#elif defined BED_USES_AD595
|
#elif defined BED_USES_AD595
|
||||||
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
|
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
|
||||||
#else
|
#else
|
||||||
#warning No heater-type defined for the bed.
|
|
||||||
return 0;
|
return 0;
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
@ -6,11 +6,7 @@
|
|||||||
#include "language.h"
|
#include "language.h"
|
||||||
#include "temperature.h"
|
#include "temperature.h"
|
||||||
#include "EEPROMwrite.h"
|
#include "EEPROMwrite.h"
|
||||||
#if LANGUAGE_CHOICE == 6
|
|
||||||
#include "LiquidCrystalRus.h"
|
|
||||||
#else
|
|
||||||
#include <LiquidCrystal.h>
|
|
||||||
#endif
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=============================imported variables============================
|
//=============================imported variables============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
@ -33,6 +29,14 @@ volatile char buttons=0; //the last checked buttons in a bit array.
|
|||||||
long encoderpos=0;
|
long encoderpos=0;
|
||||||
short lastenc=0;
|
short lastenc=0;
|
||||||
|
|
||||||
|
//TODO: This should be in a preferences file.
|
||||||
|
int plaPreheatHotendTemp;
|
||||||
|
int plaPreheatHPBTemp;
|
||||||
|
int plaPreheatFanSpeed;
|
||||||
|
|
||||||
|
int absPreheatHotendTemp;
|
||||||
|
int absPreheatHPBTemp;
|
||||||
|
int absPreheatFanSpeed;
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=============================private variables============================
|
//=============================private variables============================
|
||||||
@ -42,11 +46,7 @@ static char messagetext[LCD_WIDTH]="";
|
|||||||
//return for string conversion routines
|
//return for string conversion routines
|
||||||
static char conv[8];
|
static char conv[8];
|
||||||
|
|
||||||
#if LANGUAGE_CHOICE == 6
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||||
LiquidCrystalRus lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
||||||
#else
|
|
||||||
LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
||||||
#endif
|
|
||||||
|
|
||||||
static unsigned long previous_millis_lcd=0;
|
static unsigned long previous_millis_lcd=0;
|
||||||
//static long previous_millis_buttons=0;
|
//static long previous_millis_buttons=0;
|
||||||
@ -70,7 +70,7 @@ void lcdProgMemprint(const char *str)
|
|||||||
ch=pgm_read_byte(++str);
|
ch=pgm_read_byte(++str);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x))
|
#define LCD_PRINT_PGM(x) lcdProgMemprint(PSTR(x))
|
||||||
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
@ -366,11 +366,11 @@ void MainMenu::showStatus()
|
|||||||
{
|
{
|
||||||
encoderpos=feedmultiply;
|
encoderpos=feedmultiply;
|
||||||
clear();
|
clear();
|
||||||
lcd.setCursor(0,0);lcdprintPGM("\002000/000\001 ");
|
lcd.setCursor(0,0);LCD_PRINT_PGM("\002000/000\001 ");
|
||||||
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
|
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
|
||||||
lcd.setCursor(10,0);lcdprintPGM("B000/000\001 ");
|
lcd.setCursor(10,0);LCD_PRINT_PGM("B000/000\001 ");
|
||||||
#elif EXTRUDERS > 1
|
#elif EXTRUDERS > 1
|
||||||
lcd.setCursor(10,0);lcdprintPGM("\002000/000\001 ");
|
lcd.setCursor(10,0);LCD_PRINT_PGM("\002000/000\001 ");
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -432,7 +432,7 @@ void MainMenu::showStatus()
|
|||||||
|
|
||||||
if(starttime!=oldtime)
|
if(starttime!=oldtime)
|
||||||
{
|
{
|
||||||
lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m");
|
lcd.print(itostr2(time/60));LCD_PRINT_PGM("h ");lcd.print(itostr2(time%60));LCD_PRINT_PGM("m");
|
||||||
oldtime=time;
|
oldtime=time;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -441,7 +441,7 @@ void MainMenu::showStatus()
|
|||||||
if((currentz!=oldzpos)||force_lcd_update)
|
if((currentz!=oldzpos)||force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(10,1);
|
lcd.setCursor(10,1);
|
||||||
lcdprintPGM("Z:");lcd.print(ftostr52(current_position[2]));
|
LCD_PRINT_PGM("Z:");lcd.print(ftostr52(current_position[2]));
|
||||||
oldzpos=currentz;
|
oldzpos=currentz;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -468,7 +468,7 @@ void MainMenu::showStatus()
|
|||||||
{
|
{
|
||||||
oldfeedmultiply=curfeedmultiply;
|
oldfeedmultiply=curfeedmultiply;
|
||||||
lcd.setCursor(0,2);
|
lcd.setCursor(0,2);
|
||||||
lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% ");
|
lcd.print(itostr3(curfeedmultiply));LCD_PRINT_PGM("% ");
|
||||||
}
|
}
|
||||||
|
|
||||||
if(messagetext[0]!='\0')
|
if(messagetext[0]!='\0')
|
||||||
@ -487,7 +487,7 @@ void MainMenu::showStatus()
|
|||||||
{
|
{
|
||||||
lcd.setCursor(10,2);
|
lcd.setCursor(10,2);
|
||||||
lcd.print(itostr3((int)percent));
|
lcd.print(itostr3((int)percent));
|
||||||
lcdprintPGM("%SD");
|
LCD_PRINT_PGM("%SD");
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
#else //smaller LCDS----------------------------------
|
#else //smaller LCDS----------------------------------
|
||||||
@ -496,7 +496,7 @@ void MainMenu::showStatus()
|
|||||||
if(force_lcd_update) //initial display of content
|
if(force_lcd_update) //initial display of content
|
||||||
{
|
{
|
||||||
encoderpos=feedmultiply;
|
encoderpos=feedmultiply;
|
||||||
lcd.setCursor(0,0);lcdprintPGM("\002---/---\001 ");
|
lcd.setCursor(0,0);LCD_PRINT_PGM("\002---/---\001 ");
|
||||||
}
|
}
|
||||||
|
|
||||||
int tHotEnd0=intround(degHotend0());
|
int tHotEnd0=intround(degHotend0());
|
||||||
@ -550,26 +550,26 @@ void MainMenu::showPrepare()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemP_exit:
|
case ItemP_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemP_autostart:
|
case ItemP_autostart:
|
||||||
MENUITEM( lcdprintPGM(MSG_AUTOSTART) , BLOCK;
|
MENUITEM( LCD_PRINT_PGM(MSG_AUTOSTART) , BLOCK;
|
||||||
#ifdef SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
card.lastnr=0;card.setroot();card.checkautostart(true);
|
card.lastnr=0;card.setroot();card.checkautostart(true);
|
||||||
#endif
|
#endif
|
||||||
beepshort(); ) ;
|
beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemP_disstep:
|
case ItemP_disstep:
|
||||||
MENUITEM( lcdprintPGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemP_home:
|
case ItemP_home:
|
||||||
MENUITEM( lcdprintPGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemP_origin:
|
case ItemP_origin:
|
||||||
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemP_preheat_pla:
|
case ItemP_preheat_pla:
|
||||||
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
|
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
|
||||||
#if FAN_PIN > -1
|
#if FAN_PIN > -1
|
||||||
FanSpeed = plaPreheatFanSpeed;
|
FanSpeed = plaPreheatFanSpeed;
|
||||||
analogWrite(FAN_PIN, FanSpeed);
|
analogWrite(FAN_PIN, FanSpeed);
|
||||||
@ -577,7 +577,7 @@ void MainMenu::showPrepare()
|
|||||||
beepshort(); );
|
beepshort(); );
|
||||||
break;
|
break;
|
||||||
case ItemP_preheat_abs:
|
case ItemP_preheat_abs:
|
||||||
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
|
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
|
||||||
#if FAN_PIN > -1
|
#if FAN_PIN > -1
|
||||||
FanSpeed = absPreheatFanSpeed;
|
FanSpeed = absPreheatFanSpeed;
|
||||||
analogWrite(FAN_PIN, FanSpeed);
|
analogWrite(FAN_PIN, FanSpeed);
|
||||||
@ -585,13 +585,13 @@ void MainMenu::showPrepare()
|
|||||||
beepshort(); );
|
beepshort(); );
|
||||||
break;
|
break;
|
||||||
case ItemP_cooldown:
|
case ItemP_cooldown:
|
||||||
MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
// case ItemP_extrude:
|
// case ItemP_extrude:
|
||||||
// MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
|
// MENUITEM( LCD_PRINT_PGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
|
||||||
// break;
|
// break;
|
||||||
case ItemP_move:
|
case ItemP_move:
|
||||||
MENUITEM( lcdprintPGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
|
MENUITEM( LCD_PRINT_PGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
|
||||||
break;
|
break;
|
||||||
default:
|
default:
|
||||||
break;
|
break;
|
||||||
@ -617,14 +617,14 @@ void MainMenu::showAxisMove()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemAM_exit:
|
case ItemAM_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Prepare;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Prepare;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemAM_X:
|
case ItemAM_X:
|
||||||
{
|
{
|
||||||
//oldencoderpos=0;
|
//oldencoderpos=0;
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" X:");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" X:");
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -669,7 +669,7 @@ void MainMenu::showAxisMove()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" Y:");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" Y:");
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -714,7 +714,7 @@ void MainMenu::showAxisMove()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" Z:");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" Z:");
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -757,11 +757,11 @@ void MainMenu::showAxisMove()
|
|||||||
break;
|
break;
|
||||||
case ItemAM_E:
|
case ItemAM_E:
|
||||||
// ErikDB: TODO: this length should be changed for volumetric.
|
// ErikDB: TODO: this length should be changed for volumetric.
|
||||||
MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemAM_ERetract:
|
case ItemAM_ERetract:
|
||||||
// ErikDB: TODO: this length should be changed for volumetric.
|
// ErikDB: TODO: this length should be changed for volumetric.
|
||||||
MENUITEM( lcdprintPGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
default:
|
default:
|
||||||
break;
|
break;
|
||||||
@ -787,13 +787,13 @@ void MainMenu::showTune()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemT_exit:
|
case ItemT_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemT_speed:
|
case ItemT_speed:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_SPEED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_SPEED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(feedmultiply));
|
lcd.setCursor(13,line);lcd.print(ftostr3(feedmultiply));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -828,7 +828,7 @@ void MainMenu::showTune()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -862,7 +862,7 @@ void MainMenu::showTune()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -898,7 +898,7 @@ void MainMenu::showTune()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
|
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -933,7 +933,7 @@ void MainMenu::showTune()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FLOW);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS]));
|
lcd.setCursor(13,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -975,22 +975,22 @@ void MainMenu::showTune()
|
|||||||
updateActiveLines(ItemT_fan,encoderpos);
|
updateActiveLines(ItemT_fan,encoderpos);
|
||||||
}
|
}
|
||||||
|
|
||||||
//does not work
|
/*does not work
|
||||||
// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \
|
#define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \
|
||||||
// {\
|
{\
|
||||||
// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
|
if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
|
||||||
// if(activeline==line) \
|
if(activeline==line) \
|
||||||
// { \
|
{ \
|
||||||
// if(CLICKED) \
|
if(CLICKED) \
|
||||||
// { \
|
{ \
|
||||||
// linechanging=!linechanging; \
|
linechanging=!linechanging; \
|
||||||
// if(linechanging) {enter_action;} \
|
if(linechanging) {enter_action;} \
|
||||||
// else {accept_action;} \
|
else {accept_action;} \
|
||||||
// } \
|
} \
|
||||||
// else \
|
else \
|
||||||
// if(linechanging) {change_action};}\
|
if(linechanging) {change_action};}\
|
||||||
// }
|
}
|
||||||
//
|
*/
|
||||||
|
|
||||||
enum {
|
enum {
|
||||||
ItemCT_exit,ItemCT_nozzle0,
|
ItemCT_exit,ItemCT_nozzle0,
|
||||||
@ -1022,13 +1022,13 @@ void MainMenu::showControlTemp()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemCT_exit:
|
case ItemCT_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemCT_nozzle0:
|
case ItemCT_nozzle0:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1063,7 +1063,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE1);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE1);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend1())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend1())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1099,7 +1099,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE2);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE2);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend2())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend2())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1135,7 +1135,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_MIN);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_MIN);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min));
|
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1169,7 +1169,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_MAX);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_MAX);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max));
|
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1203,7 +1203,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FACTOR);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FACTOR);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor));
|
lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1237,12 +1237,12 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTOTEMP);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_AUTOTEMP);
|
||||||
lcd.setCursor(13,line);
|
lcd.setCursor(13,line);
|
||||||
if(autotemp_enabled)
|
if(autotemp_enabled)
|
||||||
lcdprintPGM(MSG_ON);
|
LCD_PRINT_PGM(MSG_ON);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_OFF);
|
LCD_PRINT_PGM(MSG_OFF);
|
||||||
}
|
}
|
||||||
|
|
||||||
if((activeline!=line) )
|
if((activeline!=line) )
|
||||||
@ -1253,9 +1253,9 @@ void MainMenu::showControlTemp()
|
|||||||
autotemp_enabled=!autotemp_enabled;
|
autotemp_enabled=!autotemp_enabled;
|
||||||
lcd.setCursor(13,line);
|
lcd.setCursor(13,line);
|
||||||
if(autotemp_enabled)
|
if(autotemp_enabled)
|
||||||
lcdprintPGM(MSG_ON);
|
LCD_PRINT_PGM(MSG_ON);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_OFF);
|
LCD_PRINT_PGM(MSG_OFF);
|
||||||
BLOCK;
|
BLOCK;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1266,7 +1266,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1300,7 +1300,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
|
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1336,7 +1336,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" PID-P: ");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" PID-P: ");
|
||||||
lcd.setCursor(13,line);lcd.print(itostr4(Kp));
|
lcd.setCursor(13,line);lcd.print(itostr4(Kp));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1371,7 +1371,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_I);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_I);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT));
|
lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1406,7 +1406,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_D);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_D);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT));
|
lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1443,7 +1443,7 @@ void MainMenu::showControlTemp()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_C);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_C);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
|
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1478,10 +1478,10 @@ void MainMenu::showControlTemp()
|
|||||||
#endif
|
#endif
|
||||||
break;
|
break;
|
||||||
case ItemCT_PLA_PreHeat_Setting:
|
case ItemCT_PLA_PreHeat_Setting:
|
||||||
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemCT_ABS_PreHeat_Setting:
|
case ItemCT_ABS_PreHeat_Setting:
|
||||||
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
default:
|
default:
|
||||||
break;
|
break;
|
||||||
@ -1513,14 +1513,14 @@ void MainMenu::showControlMotion()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemCM_exit:
|
case ItemCM_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemCM_acc:
|
case ItemCM_acc:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_ACC);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ACC);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
if((activeline!=line) )
|
if((activeline!=line) )
|
||||||
@ -1545,7 +1545,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(encoderpos<5) encoderpos=5;
|
if(encoderpos<5) encoderpos=5;
|
||||||
if(encoderpos>990) encoderpos=990;
|
if(encoderpos>990) encoderpos=990;
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
}break;
|
}break;
|
||||||
@ -1553,7 +1553,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_VXY_JERK);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VXY_JERK);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk));
|
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1592,11 +1592,11 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_VMAX);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VMAX);
|
||||||
if(i==ItemCM_vmaxx)lcdprintPGM(MSG_X);
|
if(i==ItemCM_vmaxx)LCD_PRINT_PGM(MSG_X);
|
||||||
if(i==ItemCM_vmaxy)lcdprintPGM(MSG_Y);
|
if(i==ItemCM_vmaxy)LCD_PRINT_PGM(MSG_Y);
|
||||||
if(i==ItemCM_vmaxz)lcdprintPGM(MSG_Z);
|
if(i==ItemCM_vmaxz)LCD_PRINT_PGM(MSG_Z);
|
||||||
if(i==ItemCM_vmaxe)lcdprintPGM(MSG_E);
|
if(i==ItemCM_vmaxe)LCD_PRINT_PGM(MSG_E);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx]));
|
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1632,7 +1632,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_VMIN);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VMIN);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate));
|
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1667,7 +1667,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_VTRAV_MIN);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VTRAV_MIN);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate));
|
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1706,12 +1706,12 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" Amax ");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" Amax ");
|
||||||
if(i==ItemCM_amaxx)lcdprintPGM(MSG_X);
|
if(i==ItemCM_amaxx)LCD_PRINT_PGM(MSG_X);
|
||||||
if(i==ItemCM_amaxy)lcdprintPGM(MSG_Y);
|
if(i==ItemCM_amaxy)LCD_PRINT_PGM(MSG_Y);
|
||||||
if(i==ItemCM_amaxz)lcdprintPGM(MSG_Z);
|
if(i==ItemCM_amaxz)LCD_PRINT_PGM(MSG_Z);
|
||||||
if(i==ItemCM_amaxe)lcdprintPGM(MSG_E);
|
if(i==ItemCM_amaxe)LCD_PRINT_PGM(MSG_E);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
if((activeline!=line) )
|
if((activeline!=line) )
|
||||||
@ -1736,7 +1736,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(encoderpos<1) encoderpos=1;
|
if(encoderpos<1) encoderpos=1;
|
||||||
if(encoderpos>990) encoderpos=990;
|
if(encoderpos>990) encoderpos=990;
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
}break;
|
}break;
|
||||||
@ -1746,8 +1746,8 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_A_RETRACT);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_A_RETRACT);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
if((activeline!=line) )
|
if((activeline!=line) )
|
||||||
@ -1773,7 +1773,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(encoderpos<10) encoderpos=10;
|
if(encoderpos<10) encoderpos=10;
|
||||||
if(encoderpos>990) encoderpos=990;
|
if(encoderpos>990) encoderpos=990;
|
||||||
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
|
||||||
}
|
}
|
||||||
|
|
||||||
}break;
|
}break;
|
||||||
@ -1781,7 +1781,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_XSTEPS);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_XSTEPS);
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[X_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[X_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1818,7 +1818,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_YSTEPS);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_YSTEPS);
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Y_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Y_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1856,7 +1856,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_ZSTEPS);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ZSTEPS);
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[Z_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[Z_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1895,7 +1895,7 @@ void MainMenu::showControlMotion()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ESTEPS);
|
||||||
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[E_AXIS]));
|
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[E_AXIS]));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1958,7 +1958,7 @@ void MainMenu::showControlRetract()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemR_exit:
|
case ItemR_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
//float retract_length=2, retract_feedrate=1200, retract_zlift=0.4;
|
//float retract_length=2, retract_feedrate=1200, retract_zlift=0.4;
|
||||||
@ -1967,12 +1967,12 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTORETRACT);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_AUTORETRACT);
|
||||||
lcd.setCursor(13,line);
|
lcd.setCursor(13,line);
|
||||||
if(autoretract_enabled)
|
if(autoretract_enabled)
|
||||||
lcdprintPGM(MSG_ON);
|
LCD_PRINT_PGM(MSG_ON);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_OFF);
|
LCD_PRINT_PGM(MSG_OFF);
|
||||||
}
|
}
|
||||||
|
|
||||||
if((activeline!=line) )
|
if((activeline!=line) )
|
||||||
@ -1983,9 +1983,9 @@ void MainMenu::showControlRetract()
|
|||||||
autoretract_enabled=!autoretract_enabled;
|
autoretract_enabled=!autoretract_enabled;
|
||||||
lcd.setCursor(13,line);
|
lcd.setCursor(13,line);
|
||||||
if(autoretract_enabled)
|
if(autoretract_enabled)
|
||||||
lcdprintPGM(MSG_ON);
|
LCD_PRINT_PGM(MSG_ON);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_OFF);
|
LCD_PRINT_PGM(MSG_OFF);
|
||||||
BLOCK;
|
BLOCK;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1995,7 +1995,7 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr52(retract_length));
|
lcd.setCursor(13,line);lcd.print(ftostr52(retract_length));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2030,7 +2030,7 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACTF);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACTF);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr4(retract_feedrate));
|
lcd.setCursor(13,line);lcd.print(itostr4(retract_feedrate));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2065,7 +2065,7 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_ZLIFT);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_ZLIFT);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr52(retract_zlift));;
|
lcd.setCursor(13,line);lcd.print(ftostr52(retract_zlift));;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2100,7 +2100,7 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVER);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_RECOVER);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr52(retract_recover_length));;
|
lcd.setCursor(13,line);lcd.print(ftostr52(retract_recover_length));;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2136,7 +2136,7 @@ void MainMenu::showControlRetract()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVERF);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_RECOVERF);
|
||||||
lcd.setCursor(13,line);lcd.print(itostr4(retract_recover_feedrate));
|
lcd.setCursor(13,line);lcd.print(itostr4(retract_recover_feedrate));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2196,24 +2196,24 @@ void MainMenu::showControl()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemC_exit:
|
case ItemC_exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemC_temp:
|
case ItemC_temp:
|
||||||
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemC_move:
|
case ItemC_move:
|
||||||
MENUITEM( lcdprintPGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
#ifdef FWRETRACT
|
#ifdef FWRETRACT
|
||||||
case ItemC_rectract:
|
case ItemC_rectract:
|
||||||
MENUITEM( lcdprintPGM(MSG_RECTRACT_WIDE) , BLOCK;status=Sub_RetractControl;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_RECTRACT_WIDE) , BLOCK;status=Sub_RetractControl;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
#endif
|
#endif
|
||||||
case ItemC_store:
|
case ItemC_store:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
|
||||||
}
|
}
|
||||||
if((activeline==line) && CLICKED)
|
if((activeline==line) && CLICKED)
|
||||||
{
|
{
|
||||||
@ -2227,7 +2227,7 @@ void MainMenu::showControl()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_LOAD_EPROM);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_LOAD_EPROM);
|
||||||
}
|
}
|
||||||
if((activeline==line) && CLICKED)
|
if((activeline==line) && CLICKED)
|
||||||
{
|
{
|
||||||
@ -2241,7 +2241,7 @@ void MainMenu::showControl()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_RESTORE_FAILSAFE);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_RESTORE_FAILSAFE);
|
||||||
}
|
}
|
||||||
if((activeline==line) && CLICKED)
|
if((activeline==line) && CLICKED)
|
||||||
{
|
{
|
||||||
@ -2288,7 +2288,7 @@ void MainMenu::showSD()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case 0:
|
case 0:
|
||||||
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
// case 1:
|
// case 1:
|
||||||
// {
|
// {
|
||||||
@ -2301,11 +2301,11 @@ void MainMenu::showSD()
|
|||||||
// if(true)
|
// if(true)
|
||||||
// #endif
|
// #endif
|
||||||
// {
|
// {
|
||||||
// lcdprintPGM(" \004Refresh");
|
// LCD_PRINT_PGM(" \004Refresh");
|
||||||
// }
|
// }
|
||||||
// else
|
// else
|
||||||
// {
|
// {
|
||||||
// lcdprintPGM(" \004Insert Card");
|
// LCD_PRINT_PGM(" \004Insert Card");
|
||||||
// }
|
// }
|
||||||
//
|
//
|
||||||
// }
|
// }
|
||||||
@ -2320,7 +2320,7 @@ void MainMenu::showSD()
|
|||||||
// }break;
|
// }break;
|
||||||
case 1:
|
case 1:
|
||||||
MENUITEM( lcd.print(" ");card.getWorkDirName();
|
MENUITEM( lcd.print(" ");card.getWorkDirName();
|
||||||
if(card.filename[0]=='/') lcdprintPGM(MSG_REFRESH);
|
if(card.filename[0]=='/') LCD_PRINT_PGM(MSG_REFRESH);
|
||||||
else {
|
else {
|
||||||
lcd.print("\005");
|
lcd.print("\005");
|
||||||
lcd.print(card.filename);
|
lcd.print(card.filename);
|
||||||
@ -2343,8 +2343,12 @@ void MainMenu::showSD()
|
|||||||
{
|
{
|
||||||
card.getfilename(i-FIRSTITEM);
|
card.getfilename(i-FIRSTITEM);
|
||||||
//Serial.print("Filenr:");Serial.println(i-2);
|
//Serial.print("Filenr:");Serial.println(i-2);
|
||||||
lcd.setCursor(0,line);lcdprintPGM(" ");
|
lcd.setCursor(0,line);LCD_PRINT_PGM(" ");
|
||||||
if(card.filenameIsDir) lcd.print("\005");
|
if(card.filenameIsDir)
|
||||||
|
{
|
||||||
|
lcd.print("\005");
|
||||||
|
card.longFilename[LCD_WIDTH-2] = '\0';
|
||||||
|
}
|
||||||
if (card.longFilename[0])
|
if (card.longFilename[0])
|
||||||
{
|
{
|
||||||
card.longFilename[LCD_WIDTH-1] = '\0';
|
card.longFilename[LCD_WIDTH-1] = '\0';
|
||||||
@ -2436,14 +2440,14 @@ void MainMenu::showMainMenu()
|
|||||||
switch(i)
|
switch(i)
|
||||||
{
|
{
|
||||||
case ItemM_watch:
|
case ItemM_watch:
|
||||||
MENUITEM( lcdprintPGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
case ItemM_prepare:
|
case ItemM_prepare:
|
||||||
MENUITEM( if(!tune) lcdprintPGM(MSG_PREPARE);else lcdprintPGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
|
MENUITEM( if(!tune) LCD_PRINT_PGM(MSG_PREPARE);else LCD_PRINT_PGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case ItemM_control:
|
case ItemM_control:
|
||||||
MENUITEM( lcdprintPGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
#ifdef SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
case ItemM_file:
|
case ItemM_file:
|
||||||
@ -2458,13 +2462,13 @@ void MainMenu::showMainMenu()
|
|||||||
#endif
|
#endif
|
||||||
{
|
{
|
||||||
if(card.sdprinting)
|
if(card.sdprinting)
|
||||||
lcdprintPGM(MSG_STOP_PRINT);
|
LCD_PRINT_PGM(MSG_STOP_PRINT);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_CARD_MENU);
|
LCD_PRINT_PGM(MSG_CARD_MENU);
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
lcdprintPGM(MSG_NO_CARD);
|
LCD_PRINT_PGM(MSG_NO_CARD);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#ifdef CARDINSERTED
|
#ifdef CARDINSERTED
|
||||||
@ -2490,13 +2494,13 @@ void MainMenu::showMainMenu()
|
|||||||
#endif
|
#endif
|
||||||
{
|
{
|
||||||
if(card.sdprinting)
|
if(card.sdprinting)
|
||||||
lcdprintPGM(MSG_PAUSE_PRINT);
|
LCD_PRINT_PGM(MSG_PAUSE_PRINT);
|
||||||
else
|
else
|
||||||
lcdprintPGM(MSG_RESUME_PRINT);
|
LCD_PRINT_PGM(MSG_RESUME_PRINT);
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
//lcdprintPGM(MSG_NO_CARD);
|
//LCD_PRINT_PGM(MSG_NO_CARD);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#ifdef CARDINSERTED
|
#ifdef CARDINSERTED
|
||||||
@ -2666,14 +2670,14 @@ void MainMenu::showPLAsettings()
|
|||||||
{
|
{
|
||||||
|
|
||||||
case ItemPLAPreHeat_Exit:
|
case ItemPLAPreHeat_Exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case ItemPLAPreHeat_set_PLA_FanSpeed:
|
case ItemPLAPreHeat_set_PLA_FanSpeed:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatFanSpeed));
|
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatFanSpeed));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2707,7 +2711,7 @@ void MainMenu::showPLAsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp));
|
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2741,7 +2745,7 @@ void MainMenu::showPLAsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp));
|
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2774,7 +2778,7 @@ void MainMenu::showPLAsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
|
||||||
}
|
}
|
||||||
if((activeline==line) && CLICKED)
|
if((activeline==line) && CLICKED)
|
||||||
{
|
{
|
||||||
@ -2812,14 +2816,14 @@ void MainMenu::showABSsettings()
|
|||||||
{
|
{
|
||||||
|
|
||||||
case ItemABSPreHeat_Exit:
|
case ItemABSPreHeat_Exit:
|
||||||
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case ItemABSPreHeat_set_FanSpeed:
|
case ItemABSPreHeat_set_FanSpeed:
|
||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatFanSpeed));
|
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatFanSpeed));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2853,7 +2857,7 @@ void MainMenu::showABSsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp));
|
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2887,7 +2891,7 @@ void MainMenu::showABSsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
|
||||||
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp));
|
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp));
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -2920,7 +2924,7 @@ void MainMenu::showABSsettings()
|
|||||||
{
|
{
|
||||||
if(force_lcd_update)
|
if(force_lcd_update)
|
||||||
{
|
{
|
||||||
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
|
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
|
||||||
}
|
}
|
||||||
if((activeline==line) && CLICKED)
|
if((activeline==line) && CLICKED)
|
||||||
{
|
{
|
@ -1,46 +1,41 @@
|
|||||||
#ifndef ULTRALCD_H
|
#ifndef ULTRALCD_H
|
||||||
#define ULTRALCD_H
|
#define ULTRALCD_H
|
||||||
|
|
||||||
#include "Marlin.h"
|
#include "Marlin.h"
|
||||||
|
|
||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
#include "language.h"
|
#include "language.h"
|
||||||
|
|
||||||
#if LANGUAGE_CHOICE == 6
|
#if LANGUAGE_CHOICE == 6
|
||||||
#include "LiquidCrystalRus.h"
|
#include "LiquidCrystalRus.h"
|
||||||
|
#define LCD_CLASS LiquidCrystalRus
|
||||||
#else
|
#else
|
||||||
#include <LiquidCrystal.h>
|
#include <LiquidCrystal.h>
|
||||||
|
#define LCD_CLASS LiquidCrystal
|
||||||
#endif
|
#endif
|
||||||
void lcd_status();
|
|
||||||
void lcd_init();
|
|
||||||
void lcd_status(const char* message);
|
|
||||||
void beep();
|
|
||||||
void buttons_init();
|
|
||||||
void buttons_check();
|
|
||||||
|
|
||||||
#define LCD_UPDATE_INTERVAL 100
|
void lcd_status();
|
||||||
#define STATUSTIMEOUT 15000
|
void lcd_init();
|
||||||
#if LANGUAGE_CHOICE == 6
|
void lcd_status(const char* message);
|
||||||
extern LiquidCrystalRus lcd;
|
void beep();
|
||||||
#else
|
void buttons_init();
|
||||||
extern LiquidCrystal lcd;
|
void buttons_check();
|
||||||
#endif
|
|
||||||
extern volatile char buttons; //the last checked buttons in a bit array.
|
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
#define LCD_UPDATE_INTERVAL 100
|
||||||
|
#define STATUSTIMEOUT 15000
|
||||||
|
|
||||||
|
extern LCD_CLASS lcd;
|
||||||
|
|
||||||
|
extern volatile char buttons; //the last checked buttons in a bit array.
|
||||||
|
|
||||||
|
#ifdef NEWPANEL
|
||||||
#define EN_C (1<<BLEN_C)
|
#define EN_C (1<<BLEN_C)
|
||||||
#define EN_B (1<<BLEN_B)
|
#define EN_B (1<<BLEN_B)
|
||||||
#define EN_A (1<<BLEN_A)
|
#define EN_A (1<<BLEN_A)
|
||||||
|
|
||||||
#define CLICKED (buttons&EN_C)
|
#define CLICKED (buttons&EN_C)
|
||||||
#define BLOCK {blocking=millis()+blocktime;}
|
#define BLOCK {blocking=millis()+blocktime;}
|
||||||
#if (SDCARDDETECT > -1)
|
#else
|
||||||
#ifdef SDCARDDETECTINVERTED
|
|
||||||
#define CARDINSERTED (READ(SDCARDDETECT)!=0)
|
|
||||||
#else
|
|
||||||
#define CARDINSERTED (READ(SDCARDDETECT)==0)
|
|
||||||
#endif
|
|
||||||
#endif //SDCARDTETECTINVERTED
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
//atomatic, do not change
|
//atomatic, do not change
|
||||||
#define B_LE (1<<BL_LE)
|
#define B_LE (1<<BL_LE)
|
||||||
#define B_UP (1<<BL_UP)
|
#define B_UP (1<<BL_UP)
|
||||||
@ -53,9 +48,18 @@
|
|||||||
|
|
||||||
#define CLICKED ((buttons&B_MI)||(buttons&B_ST))
|
#define CLICKED ((buttons&B_MI)||(buttons&B_ST))
|
||||||
#define BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;}
|
#define BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;}
|
||||||
|
#endif
|
||||||
|
|
||||||
#endif
|
#if (SDCARDDETECT > -1)
|
||||||
|
#ifdef SDCARDDETECTINVERTED
|
||||||
|
#define CARDINSERTED (READ(SDCARDDETECT)!=0)
|
||||||
|
#else
|
||||||
|
#define CARDINSERTED (READ(SDCARDDETECT)==0)
|
||||||
|
#endif //SDCARDTETECTINVERTED
|
||||||
|
#else
|
||||||
|
//If we don't have a card detect line, aways asume the card is inserted
|
||||||
|
#define CARDINSERTED true
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
// blocking time for recognizing a new keypress of one key, ms
|
// blocking time for recognizing a new keypress of one key, ms
|
||||||
@ -152,8 +156,8 @@
|
|||||||
|
|
||||||
#define LCD_INIT lcd_init();
|
#define LCD_INIT lcd_init();
|
||||||
#define LCD_MESSAGE(x) lcd_status(x);
|
#define LCD_MESSAGE(x) lcd_status(x);
|
||||||
#define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x));
|
#define LCD_MESSAGEPGM(x) lcd_statuspgm(PSTR(x));
|
||||||
#define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(MYPGM(x));
|
#define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(PSTR(x));
|
||||||
#define LCD_STATUS lcd_status()
|
#define LCD_STATUS lcd_status()
|
||||||
#else //no lcd
|
#else //no lcd
|
||||||
#define LCD_INIT
|
#define LCD_INIT
|
||||||
@ -178,4 +182,14 @@ char *itostr31(const int &xx);
|
|||||||
char *itostr3(const int &xx);
|
char *itostr3(const int &xx);
|
||||||
char *itostr4(const int &xx);
|
char *itostr4(const int &xx);
|
||||||
char *ftostr51(const float &x);
|
char *ftostr51(const float &x);
|
||||||
|
|
||||||
|
//TODO: These do not belong here.
|
||||||
|
extern int plaPreheatHotendTemp;
|
||||||
|
extern int plaPreheatHPBTemp;
|
||||||
|
extern int plaPreheatFanSpeed;
|
||||||
|
|
||||||
|
extern int absPreheatHotendTemp;
|
||||||
|
extern int absPreheatHPBTemp;
|
||||||
|
extern int absPreheatFanSpeed;
|
||||||
|
|
||||||
#endif //ULTRALCD
|
#endif //ULTRALCD
|
||||||
|
54
Marlin/watchdog.cpp
Normal file
54
Marlin/watchdog.cpp
Normal file
@ -0,0 +1,54 @@
|
|||||||
|
#include "Marlin.h"
|
||||||
|
|
||||||
|
#ifdef USE_WATCHDOG
|
||||||
|
#include "watchdog.h"
|
||||||
|
#include "ultralcd.h"
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================private variables ============================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================functinos ============================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
|
||||||
|
/// intialise watch dog with a 1 sec interrupt time
|
||||||
|
void watchdog_init()
|
||||||
|
{
|
||||||
|
#ifdef RESET_MANUAL
|
||||||
|
//We enable the watchdog timer, but only for the interrupt.
|
||||||
|
//Take care, as this requires the correct order of operation, with interrupts disabled. See the datasheet of any AVR chip for details.
|
||||||
|
wdt_reset();
|
||||||
|
_WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE);
|
||||||
|
_WD_CONTROL_REG = _BV(WDIE) | WDTO_1S;
|
||||||
|
#else
|
||||||
|
wdt_enable(WDTO_1S);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/// reset watchdog. MUST be called every 1s after init or avr will reset.
|
||||||
|
void watchdog_reset()
|
||||||
|
{
|
||||||
|
wdt_reset();
|
||||||
|
}
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================ISR ============================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
//Watchdog timer interrupt, called if main program blocks >1sec and manual reset is enabled.
|
||||||
|
#ifdef RESET_MANUAL
|
||||||
|
ISR(WDT_vect)
|
||||||
|
{
|
||||||
|
LCD_MESSAGEPGM("ERR:Please Reset");//16 characters so it fits on a 16x2 display
|
||||||
|
LCD_STATUS;
|
||||||
|
SERIAL_ERROR_START;
|
||||||
|
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
|
||||||
|
|
||||||
|
kill(); //kill blocks
|
||||||
|
while(1); //wait for user or serial reset
|
||||||
|
}
|
||||||
|
#endif//RESET_MANUAL
|
||||||
|
|
||||||
|
#endif//USE_WATCHDOG
|
@ -1,16 +1,17 @@
|
|||||||
#ifndef WATCHDOG_H
|
#ifndef WATCHDOG_H
|
||||||
#define WATCHDOG_H
|
#define WATCHDOG_H
|
||||||
|
|
||||||
#include "Marlin.h"
|
#include "Marlin.h"
|
||||||
|
|
||||||
#ifdef USE_WATCHDOG
|
#ifdef USE_WATCHDOG
|
||||||
|
|
||||||
// intialise watch dog with a 1 sec interrupt time
|
// intialise watch dog with a 1 sec interrupt time
|
||||||
void wd_init();
|
void watchdog_init();
|
||||||
// pad the dog/reset watchdog. MUST be called at least every second after the first wd_init or avr will go into emergency procedures..
|
// pad the dog/reset watchdog. MUST be called at least every second after the first watchdog_init or avr will go into emergency procedures..
|
||||||
void wd_reset();
|
void watchdog_reset();
|
||||||
|
|
||||||
#else
|
#else
|
||||||
FORCE_INLINE void wd_init() {};
|
//If we do not have a watchdog, then we can have empty functions which are optimized away.
|
||||||
FORCE_INLINE void wd_reset() {};
|
FORCE_INLINE void watchdog_init() {};
|
||||||
|
FORCE_INLINE void watchdog_reset() {};
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
@ -1,63 +0,0 @@
|
|||||||
#ifdef USE_WATCHDOG
|
|
||||||
#include "Marlin.h"
|
|
||||||
#include "watchdog.h"
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================private variables ============================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
static volatile uint8_t timeout_seconds=0;
|
|
||||||
|
|
||||||
void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================functinos ============================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
|
|
||||||
/// intialise watch dog with a 1 sec interrupt time
|
|
||||||
void wd_init()
|
|
||||||
{
|
|
||||||
WDTCSR |= (1<<WDCE )|(1<<WDE ); //allow changes
|
|
||||||
WDTCSR = (1<<WDCE )|(1<<WDE )|(1<<WDP3 )|(1<<WDP0); // Reset after 8 sec.
|
|
||||||
// WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )| (1<<WDP3) | (1<<WDP0);
|
|
||||||
}
|
|
||||||
|
|
||||||
/// reset watchdog. MUST be called every 1s after init or avr will reset.
|
|
||||||
void wd_reset()
|
|
||||||
{
|
|
||||||
wdt_reset();
|
|
||||||
}
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================ISR ============================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
//Watchdog timer interrupt, called if main program blocks >1sec
|
|
||||||
ISR(WDT_vect)
|
|
||||||
{
|
|
||||||
if(timeout_seconds++ >= WATCHDOG_TIMEOUT)
|
|
||||||
{
|
|
||||||
|
|
||||||
#ifdef RESET_MANUAL
|
|
||||||
LCD_MESSAGEPGM("Please Reset!");
|
|
||||||
LCD_STATUS;
|
|
||||||
SERIAL_ERROR_START;
|
|
||||||
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
|
|
||||||
#else
|
|
||||||
LCD_MESSAGEPGM("Timeout, resetting!");
|
|
||||||
LCD_STATUS;
|
|
||||||
#endif
|
|
||||||
//disable watchdog, it will survife reboot.
|
|
||||||
WDTCSR |= (1<<WDCE) | (1<<WDE);
|
|
||||||
WDTCSR = 0;
|
|
||||||
#ifdef RESET_MANUAL
|
|
||||||
kill(); //kill blocks
|
|
||||||
while(1); //wait for user or serial reset
|
|
||||||
#else
|
|
||||||
ctrlaltdelete();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif /* USE_WATCHDOG */
|
|
Loading…
Reference in New Issue
Block a user