Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
Clean up HAL trailing spaces, MKS SBASE pins
This commit is contained in:
Scott Lahteine
GitHub
commit
070cd34fe8
@ -1,3 +1,24 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
@ -19,8 +40,6 @@ FATFS fat_fs;
|
||||
FIL eeprom_file;
|
||||
|
||||
bool access_start() {
|
||||
UINT file_size = 0,
|
||||
bytes_written = 0;
|
||||
const char eeprom_erase_value = 0xFF;
|
||||
MSC_Aquire_Lock();
|
||||
if (f_mount(&fat_fs, "", 1)) {
|
||||
@ -30,9 +49,8 @@ bool access_start() {
|
||||
FRESULT res = f_open(&eeprom_file, "eeprom.dat", FA_OPEN_ALWAYS | FA_WRITE | FA_READ);
|
||||
if (res) MSC_Release_Lock();
|
||||
|
||||
if (res == FR_OK) file_size = f_size(&eeprom_file);
|
||||
|
||||
if (res == FR_OK) {
|
||||
uint16_t bytes_written, file_size = f_size(&eeprom_file);
|
||||
f_lseek(&eeprom_file, file_size);
|
||||
while (file_size <= E2END && res == FR_OK) {
|
||||
res = f_write(&eeprom_file, &eeprom_erase_value, 1, &bytes_written);
|
||||
@ -56,7 +74,7 @@ bool access_finish() {
|
||||
// File function return codes for type FRESULT This goes away soon. But it is helpful right now to see
|
||||
// the different errors the read_data() and write_data() functions are seeing.
|
||||
//
|
||||
//typedef enum {
|
||||
// typedef enum {
|
||||
// FR_OK = 0, /* (0) Succeeded */
|
||||
// FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */
|
||||
// FR_INT_ERR, /* (2) Assertion failed */
|
||||
@ -77,32 +95,31 @@ bool access_finish() {
|
||||
// FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */
|
||||
// FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > FF_FS_LOCK */
|
||||
// FR_INVALID_PARAMETER /* (19) Given parameter is invalid */
|
||||
//} FRESULT;
|
||||
// } FRESULT;
|
||||
|
||||
bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||
FRESULT s;
|
||||
UINT bytes_written = 0;
|
||||
uint16_t bytes_written = 0;
|
||||
|
||||
s = f_lseek(&eeprom_file, pos);
|
||||
if ( s ) {
|
||||
if (s) {
|
||||
SERIAL_PROTOCOLPAIR(" write_data(", pos); // This extra chit-chat goes away soon. But it is helpful
|
||||
SERIAL_PROTOCOLPAIR(",", (int) value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", (int) size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOLPAIR(",", (int)value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", (int)size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOL("...)\n");
|
||||
SERIAL_PROTOCOLPAIR(" f_lseek()=", (int) s);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLLNPAIR(" f_lseek()=", (int)s);
|
||||
return s;
|
||||
}
|
||||
|
||||
s = f_write(&eeprom_file, (void *)value, size, &bytes_written);
|
||||
if ( s ) {
|
||||
if (s) {
|
||||
SERIAL_PROTOCOLPAIR(" write_data(", pos); // This extra chit-chat goes away soon. But it is helpful
|
||||
SERIAL_PROTOCOLPAIR(",", (int) value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", (int) size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOL("...)\n");
|
||||
SERIAL_PROTOCOLPAIR(" f_write()=", (int) s);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLPAIR(" size=", (int) size);
|
||||
SERIAL_PROTOCOLPAIR("\n bytes_written=", (int) bytes_written);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLPAIR(",", (int)value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOLLN("...)");
|
||||
SERIAL_PROTOCOLLNPAIR(" f_write()=", (int)s);
|
||||
SERIAL_PROTOCOLPAIR(" size=", size);
|
||||
SERIAL_PROTOCOLLNPAIR("\n bytes_written=", bytes_written);
|
||||
return s;
|
||||
}
|
||||
crc16(crc, value, size);
|
||||
@ -111,29 +128,26 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||
}
|
||||
|
||||
bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
|
||||
UINT bytes_read = 0;
|
||||
uint16_t bytes_read = 0;
|
||||
FRESULT s;
|
||||
s = f_lseek(&eeprom_file, pos);
|
||||
if ( s ) {
|
||||
SERIAL_PROTOCOLPAIR(" read_data(", pos); // This extra chit-chat goes away soon. But it is helpful
|
||||
SERIAL_PROTOCOLPAIR(",", (int) value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", (int) size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOL("...)\n");
|
||||
SERIAL_PROTOCOLPAIR(" f_lseek()=", (int) s);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLPAIR(",", (int)value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOLLN("...)");
|
||||
SERIAL_PROTOCOLLNPAIR(" f_lseek()=", (int)s);
|
||||
return true;
|
||||
}
|
||||
s = f_read(&eeprom_file, (void *)value, size, &bytes_read);
|
||||
if ( s ) {
|
||||
if (s) {
|
||||
SERIAL_PROTOCOLPAIR(" read_data(", pos); // This extra chit-chat goes away soon. But it is helpful
|
||||
SERIAL_PROTOCOLPAIR(",", (int) value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", (int) size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOL("...)\n");
|
||||
SERIAL_PROTOCOLPAIR(" f_write()=", (int) s);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLPAIR(" size=", (int) size);
|
||||
SERIAL_PROTOCOLPAIR("\n bytes_read=", (int) bytes_read);
|
||||
SERIAL_PROTOCOL("\n");
|
||||
SERIAL_PROTOCOLPAIR(",", (int)value); // right now to see errors that are happening in the
|
||||
SERIAL_PROTOCOLPAIR(",", size); // read_data() and write_data() functions
|
||||
SERIAL_PROTOCOLLN("...)");
|
||||
SERIAL_PROTOCOLLNPAIR(" f_write()=", (int)s);
|
||||
SERIAL_PROTOCOLPAIR(" size=", size);
|
||||
SERIAL_PROTOCOLLNPAIR("\n bytes_read=", bytes_read);
|
||||
return true;
|
||||
}
|
||||
crc16(crc, value, size);
|
||||
|
||||
@ -43,12 +43,6 @@
|
||||
#define D58 58
|
||||
*/
|
||||
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
@ -59,8 +53,6 @@
|
||||
#define Z_MIN_PIN 19 //The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22)
|
||||
#define Z_MAX_PIN 18 //10k pullup to 3.3V, 1K series
|
||||
|
||||
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
@ -84,22 +76,19 @@
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
|
||||
#define X2_STEP_PIN 36
|
||||
#define X2_DIR_PIN 34
|
||||
#define X2_ENABLE_PIN 30
|
||||
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
|
||||
|
||||
#define TEMP_0_PIN 0 //A0 (TH1)
|
||||
#define TEMP_BED_PIN 1 //A1 (TH2)
|
||||
#define TEMP_1_PIN 2 //A2 (TH3)
|
||||
#define TEMP_2_PIN 3 //A3 (TH4)
|
||||
#define TEMP_0_PIN 0 // A0 (TH1)
|
||||
#define TEMP_BED_PIN 1 // A1 (TH2)
|
||||
#define TEMP_1_PIN 2 // A2 (TH3)
|
||||
#define TEMP_2_PIN 3 // A3 (TH4)
|
||||
|
||||
|
||||
//
|
||||
@ -138,12 +127,10 @@
|
||||
#define PIN_P2_11 35
|
||||
#define PIN_P4_28 13
|
||||
|
||||
|
||||
//
|
||||
// Prusa i3 MK2 Multi Material Multiplexer Support
|
||||
//
|
||||
|
||||
|
||||
#define E_MUX0_PIN 50 // J7-4
|
||||
#define E_MUX1_PIN 16 // J7-5
|
||||
#define E_MUX2_PIN 80 // J7-6
|
||||
@ -162,59 +149,25 @@
|
||||
* that the garbage/lines are erased immediately after the SD card accesses are completed.
|
||||
*/
|
||||
|
||||
#if ENABLED(ULTRA_LCD) //
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define BEEPER_PIN 49 // EXP1.1
|
||||
|
||||
#define BTN_ENC 37 // EXP1.2
|
||||
#define BTN_EN1 31 // EXP2.5
|
||||
#define BTN_EN2 33 // EXP2.3
|
||||
|
||||
#define SD_DETECT_PIN 57 // EXP2.7
|
||||
#define KILL_PIN -1 // Not connected
|
||||
#define LCD_PINS_RS 16 // EXP1.4
|
||||
#define LCD_SDSS 58 // EXP2.4
|
||||
#define LCD_BACKLIGHT_PIN -1 // Not connected
|
||||
#define LCD_PINS_ENABLE 51 // EXP1.3
|
||||
#define LCD_PINS_D4 80 // EXP1.5
|
||||
|
||||
#define DOGLCD_A0 -1 // Not connected
|
||||
#define DOGLCD_CS -1 // Not connected
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
|
||||
#define LCD_PINS_D5 -1 // EXP1.6 Not connected
|
||||
#define LCD_PINS_D6 -1 // EXP1.7 Not connected
|
||||
#define LCD_PINS_D7 -1 // EXP1.8 Not connected
|
||||
#endif
|
||||
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
|
||||
// When going up/down directory levels the SD card is
|
||||
// accessed but the garbage/lines are removed when the
|
||||
// LCD updates
|
||||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_LIMIT 255 // Maximum number of sorted items (10-256).
|
||||
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
|
||||
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#endif
|
||||
#endif
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
//
|
||||
// Ethernet pins
|
||||
//
|
||||
#ifndef ULTIPANEL
|
||||
#define ENET_MDIO 71 // J12-4
|
||||
#define ENET_RX_ER 73 // J12-6
|
||||
#define ENET_RXD1 75 // J12-8
|
||||
#define ENET_MDIO 71 // J12-4
|
||||
#define ENET_RX_ER 73 // J12-6
|
||||
#define ENET_RXD1 75 // J12-8
|
||||
#endif
|
||||
#define ENET_MOC 70 // J12-3
|
||||
#define REF_CLK 72 // J12-5
|
||||
@ -225,9 +178,9 @@
|
||||
#define ENET_TXD1 79 // J12-12
|
||||
|
||||
/**
|
||||
* PWMS
|
||||
* PWMs
|
||||
*
|
||||
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
|
||||
* There are 6 PWMs. Each PWM can be assigned to one of two pins.
|
||||
*
|
||||
* SERVO2 does NOT have a PWM assigned to it.
|
||||
*
|
||||
@ -245,9 +198,8 @@
|
||||
* PWM1.6 DIO10 RAMPS_D10_PIN
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* special pins
|
||||
* Special pins
|
||||
* D37 - not 5V tolerant
|
||||
* D49 - not 5V tolerant
|
||||
* D57 - open collector
|
||||
|
||||
Loading…
Reference in New Issue
Block a user