Add FAN_MAX_PWM to example configs

This commit is contained in:
Scott Lahteine 2018-05-15 21:08:54 -05:00
parent 43ddb29f9e
commit 0755fe8ba2
47 changed files with 611 additions and 141 deletions

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -213,10 +213,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder

View File

@ -208,10 +208,20 @@
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// This defines the minimal speed for the main fan, run in PWM mode /**
// to enable uncomment and set minimal PWM speed for reliable running (1-255) * PWM Fan Scaling
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM *
* Define the min/max speeds for PWM fans (as set with M106).
*
* With these options the M106 0-255 value range is scaled to a subset
* to ensure that the fan has enough power to spin, or to run lower
* current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
* Value 0 always turns off the fan.
*
* Define one or both of these to override the default 0-255 range.
*/
//#define FAN_MIN_PWM 50 //#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
// @section extruder // @section extruder