MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🔨 Fix HAL/STM32 F103Zx builds (#22610)

Browse Source
This commit is contained in:
Scott Lahteine 2021-08-30 17:02:12 -05:00 committed by Scott Lahteine
parent 5e97f37a78
commit 086fa0f0a7
10 changed files with 66 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/gcode/motion/G2_G3.cpp
View File

@ -217,7 +217,7 @@ void plan_arc(
* tool precision in some cases. Therefore, arc path correction is implemented. * tool precision in some cases. Therefore, arc path correction is implemented.
* *
* Small angle approximation may be used to reduce computation overhead further. This approximation * Small angle approximation may be used to reduce computation overhead further. This approximation
* holds for everything, but very small circles and large MM_PER_ARC_SEGMENT values. In other words, * holds for everything, but very small circles and large MAX_ARC_SEGMENT_MM values. In other words,
* theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large * theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large
* to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for * to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for
* numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an * numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an

3
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View File

@ -147,6 +147,9 @@
#define FSMC_CS_PIN PD7 // NE4 #define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0 #define FSMC_RS_PIN PD11 // A0
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5

2
buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h
View File

@ -8,7 +8,7 @@
#define HAL_I2C_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? //#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
#define HAL_SPI_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED

2
buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h
View File

@ -8,7 +8,7 @@
#define HAL_I2C_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? //#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
#define HAL_SPI_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED

2
buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h
View File

@ -8,7 +8,7 @@
#define HAL_I2C_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? //#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
#define HAL_SPI_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED

2
buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h
View File

@ -8,7 +8,7 @@
#define HAL_I2C_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? //#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
#define HAL_SPI_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED

41
buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h
View File

@ -20,25 +20,18 @@ extern "C" {
*/ */
#include "stm32yyxx_hal_conf.h" #include "stm32yyxx_hal_conf.h"
#ifdef HAL_PWR_MODULE_ENABLED #undef HAL_PWR_MODULE_ENABLED
#undef HAL_PWR_MODULE_ENABLED // only way to disable it #define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
#endif
#if defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY) #define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
#endif
#ifndef HAL_IWDG_MODULE_ENABLED
#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
#endif
#ifdef HAL_PCD_MODULE_ENABLED #ifdef HAL_PCD_MODULE_ENABLED
#warning No direct STM32 USB pins on Longer3D board #warning "No direct STM32 USB pins on Longer3D board"
#undef HAL_PCD_MODULE_ENABLED // USB Device #undef HAL_PCD_MODULE_ENABLED // USB Device
#endif #endif
#ifdef HAL_HCD_MODULE_ENABLED #ifdef HAL_HCD_MODULE_ENABLED
#warning No direct STM32 USB pins on Longer3D board #warning "No direct STM32 USB pins on Longer3D board"
#undef HAL_HCD_MODULE_ENABLED // USB Host #undef HAL_HCD_MODULE_ENABLED // USB Host
#endif #endif
@ -46,25 +39,12 @@ extern "C" {
//#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it //#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it
#endif #endif
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED #undef HAL_CAN_LEGACY_MODULE_ENABLED
#undef HAL_CAN_LEGACY_MODULE_ENABLED #undef HAL_CAN_MODULE_ENABLED
#endif #undef HAL_DAC_MODULE_ENABLED
#undef HAL_RTC_MODULE_ENABLED
#ifdef HAL_CAN_MODULE_ENABLED #define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE
#undef HAL_CAN_MODULE_ENABLED
#endif
#ifdef HAL_DAC_MODULE_ENABLED
#undef HAL_DAC_MODULE_ENABLED
#endif
#ifdef HAL_RTC_MODULE_ENABLED
#undef HAL_RTC_MODULE_ENABLED
#endif
#ifndef HAL_EXTI_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE
#endif
/** /**
* @brief List of modules in the framework (first ones enabled by default) * @brief List of modules in the framework (first ones enabled by default)
@ -345,4 +325,3 @@ extern "C" {
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif

3
buildroot/share/PlatformIO/variants/MARLIN_F103Zx/PinNamesVar.h
View File

@ -1,5 +1,6 @@
/* SYS_WKUP */ /* SYS_WKUP */
#ifdef PWR_WAKEUP_PIN1 #if defined(PWR_WAKEUP_PIN1) && defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY)
#error "PA0 is used by thermal sensor. Disable low power wake with -DHAL_PWR_MODULE_ONLY."
SYS_WKUP1 = PA_0, SYS_WKUP1 = PA_0,
#endif #endif
#ifdef PWR_WAKEUP_PIN2 #ifdef PWR_WAKEUP_PIN2

71
buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h
View File

@ -37,40 +37,43 @@ extern "C" {
/** /**
* @brief This is the list of modules to be used in the HAL driver * @brief This is the list of modules to be used in the HAL driver
*/ */
//#define HAL_MODULE_ENABLED #define HAL_MODULE_ENABLED
//#define HAL_ADC_MODULE_ENABLED #define HAL_ADC_MODULE_ENABLED
//#define HAL_CAN_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED
//#define HAL_CAN_LEGACY_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED
//#define HAL_CEC_MODULE_ENABLED #define HAL_EXTI_MODULE_ENABLED
//#define HAL_CORTEX_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED
//#define HAL_CRC_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED
//#define HAL_DAC_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED
//#define HAL_DMA_MODULE_ENABLED #define HAL_IWDG_MODULE_ENABLED
//#define HAL_ETH_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED #define HAL_SPI_MODULE_ENABLED
//#define HAL_FLASH_MODULE_ENABLED #define HAL_SRAM_MODULE_ENABLED
//#define HAL_GPIO_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
//#define HAL_HCD_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED
//#define HAL_I2C_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED //#define HAL_UART_MODULE_ENABLED // by default
//#define HAL_IRDA_MODULE_ENABLED //#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
//#define HAL_IWDG_MODULE_ENABLED #define HAL_SD_MODULE_ENABLED
//#define HAL_NAND_MODULE_ENABLED
//#define HAL_NOR_MODULE_ENABLED #undef HAL_CAN_MODULE_ENABLED
//#define HAL_PCCARD_MODULE_ENABLED #undef HAL_CAN_LEGACY_MODULE_ENABLED
//#define HAL_PCD_MODULE_ENABLED #undef HAL_CEC_MODULE_ENABLED
//#define HAL_PWR_MODULE_ENABLED #undef HAL_DAC_MODULE_ENABLED
//#define HAL_RCC_MODULE_ENABLED #undef HAL_ETH_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED #undef HAL_HCD_MODULE_ENABLED // USB Host
//#define HAL_SD_MODULE_ENABLED #undef HAL_I2S_MODULE_ENABLED
//#define HAL_SMARTCARD_MODULE_ENABLED #undef HAL_IRDA_MODULE_ENABLED
//#define HAL_SPI_MODULE_ENABLED #undef HAL_NAND_MODULE_ENABLED
//#define HAL_SRAM_MODULE_ENABLED #undef HAL_NOR_MODULE_ENABLED
//#define HAL_TIM_MODULE_ENABLED #undef HAL_PCCARD_MODULE_ENABLED
//#define HAL_UART_MODULE_ENABLED #undef HAL_PWR_MODULE_ENABLED
//#define HAL_USART_MODULE_ENABLED #undef HAL_RTC_MODULE_ENABLED
//#define HAL_WWDG_MODULE_ENABLED #undef HAL_SMARTCARD_MODULE_ENABLED
//#define HAL_MMC_MODULE_ENABLED #undef HAL_WWDG_MODULE_ENABLED
#undef HAL_MMC_MODULE_ENABLED
#define HAL_PWR_MODULE_ONLY
/* ########################## Oscillator Values adaptation ####################*/ /* ########################## Oscillator Values adaptation ####################*/
/** /**

12
ini/stm32f1.ini
View File

@ -348,9 +348,15 @@ debug_tool = stlink
# TRIGORILLA PRO (STM32F103ZET6) # TRIGORILLA PRO (STM32F103ZET6)
# #
[env:trigorilla_pro] [env:trigorilla_pro]
platform = ${common_stm32.platform} platform = ${stm32_variant.platform}
extends = env:mks_robin extends = stm32_variant
extra_scripts = ${common_stm32.extra_scripts} board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
board_build.offset = 0x7000
build_flags = ${stm32_variant.build_flags}
-DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
# #
# Chitu boards like Tronxy X5s (STM32F103ZET6) # Chitu boards like Tronxy X5s (STM32F103ZET6)