diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index 05a3a47b35..360029b187 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -1,33 +1,92 @@ +/** + * ConfigurationStore.cpp + * + * Configuration and EEPROM storage + * + * V15 EEPROM Layout: + * + * ver + * axis_steps_per_unit (x4) + * max_feedrate (x4) + * max_acceleration_units_per_sq_second (x4) + * acceleration + * retract_acceleration + * minimumfeedrate + * mintravelfeedrate + * minsegmenttime + * max_xy_jerk + * max_z_jerk + * max_e_jerk + * add_homing (x3) + * + * DELTA: + * endstop_adj (x3) + * delta_radius + * delta_diagonal_rod + * delta_segments_per_second + * + * ULTIPANEL: + * plaPreheatHotendTemp + * plaPreheatHPBTemp + * plaPreheatFanSpeed + * absPreheatHotendTemp + * absPreheatHPBTemp + * absPreheatFanSpeed + * zprobe_zoffset + * + * PIDTEMP: + * Kp[0], Ki[0], Kd[0], Kc[0] + * Kp[1], Ki[1], Kd[1], Kc[1] + * Kp[2], Ki[2], Kd[2], Kc[2] + * Kp[3], Ki[3], Kd[3], Kc[3] + * + * DOGLCD: + * lcd_contrast + * + * SCARA: + * axis_scaling (x3) + * + * FWRETRACT: + * autoretract_enabled + * retract_length + * retract_length_swap + * retract_feedrate + * retract_zlift + * retract_recover_length + * retract_recover_length_swap + * retract_recover_feedrate + * + * volumetric_enabled + * + * filament_size (x4) + * + */ #include "Marlin.h" #include "planner.h" #include "temperature.h" #include "ultralcd.h" #include "ConfigurationStore.h" -void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) -{ - do - { - eeprom_write_byte((unsigned char*)pos, *value); - pos++; - value++; - }while(--size); +void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) { + do { + eeprom_write_byte((unsigned char*)pos, *value); + pos++; + value++; + } while (--size); +} +void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) { + do { + *value = eeprom_read_byte((unsigned char*)pos); + pos++; + value++; + } while (--size); } #define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value)) -void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) -{ - do - { - *value = eeprom_read_byte((unsigned char*)pos); - pos++; - value++; - }while(--size); -} #define EEPROM_READ_VAR(pos, value) _EEPROM_readData(pos, (uint8_t*)&value, sizeof(value)) + //====================================================================================== - - +#define DUMMY_PID_VALUE 3000.0f #define EEPROM_OFFSET 100 @@ -38,506 +97,562 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) // wrong data being written to the variables. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. -#define EEPROM_VERSION "V14" +#define EEPROM_VERSION "V15" #ifdef EEPROM_SETTINGS -void Config_StoreSettings() -{ - char ver[4]= "000"; - int i=EEPROM_OFFSET; - EEPROM_WRITE_VAR(i,ver); // invalidate data first - EEPROM_WRITE_VAR(i,axis_steps_per_unit); - EEPROM_WRITE_VAR(i,max_feedrate); - EEPROM_WRITE_VAR(i,max_acceleration_units_per_sq_second); - EEPROM_WRITE_VAR(i,acceleration); - EEPROM_WRITE_VAR(i,retract_acceleration); - EEPROM_WRITE_VAR(i,minimumfeedrate); - EEPROM_WRITE_VAR(i,mintravelfeedrate); - EEPROM_WRITE_VAR(i,minsegmenttime); - EEPROM_WRITE_VAR(i,max_xy_jerk); - EEPROM_WRITE_VAR(i,max_z_jerk); - EEPROM_WRITE_VAR(i,max_e_jerk); - EEPROM_WRITE_VAR(i,add_homing); + +void Config_StoreSettings() { + float dummy = 0.0f; + char ver[4] = "000"; + int i = EEPROM_OFFSET; + EEPROM_WRITE_VAR(i, ver); // invalidate data first + EEPROM_WRITE_VAR(i, axis_steps_per_unit); + EEPROM_WRITE_VAR(i, max_feedrate); + EEPROM_WRITE_VAR(i, max_acceleration_units_per_sq_second); + EEPROM_WRITE_VAR(i, acceleration); + EEPROM_WRITE_VAR(i, retract_acceleration); + EEPROM_WRITE_VAR(i, minimumfeedrate); + EEPROM_WRITE_VAR(i, mintravelfeedrate); + EEPROM_WRITE_VAR(i, minsegmenttime); + EEPROM_WRITE_VAR(i, max_xy_jerk); + EEPROM_WRITE_VAR(i, max_z_jerk); + EEPROM_WRITE_VAR(i, max_e_jerk); + EEPROM_WRITE_VAR(i, add_homing); + #ifdef DELTA - EEPROM_WRITE_VAR(i,endstop_adj); - EEPROM_WRITE_VAR(i,delta_radius); - EEPROM_WRITE_VAR(i,delta_diagonal_rod); - EEPROM_WRITE_VAR(i,delta_segments_per_second); - #endif//DELTA + EEPROM_WRITE_VAR(i, endstop_adj); // 3 floats + EEPROM_WRITE_VAR(i, delta_radius); // 1 float + EEPROM_WRITE_VAR(i, delta_diagonal_rod); // 1 float + EEPROM_WRITE_VAR(i, delta_segments_per_second); // 1 float + #else + dummy = 0.0f; + for (int q=6; q--;) EEPROM_WRITE_VAR(i, dummy); + #endif + #ifndef ULTIPANEL - int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; - int absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; - #endif//ULTIPANEL - EEPROM_WRITE_VAR(i,plaPreheatHotendTemp); - EEPROM_WRITE_VAR(i,plaPreheatHPBTemp); - EEPROM_WRITE_VAR(i,plaPreheatFanSpeed); - EEPROM_WRITE_VAR(i,absPreheatHotendTemp); - EEPROM_WRITE_VAR(i,absPreheatHPBTemp); - EEPROM_WRITE_VAR(i,absPreheatFanSpeed); - EEPROM_WRITE_VAR(i,zprobe_zoffset); - #ifdef PIDTEMP - float dummy = 0.0f; - for (int e = 0; e < 4; e++) - { - if (e < EXTRUDERS) - { - EEPROM_WRITE_VAR(i,PID_PARAM(Kp,e)); - EEPROM_WRITE_VAR(i,PID_PARAM(Ki,e)); - EEPROM_WRITE_VAR(i,PID_PARAM(Kd,e)); + int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED, + absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; + #endif // !ULTIPANEL + + EEPROM_WRITE_VAR(i, plaPreheatHotendTemp); + EEPROM_WRITE_VAR(i, plaPreheatHPBTemp); + EEPROM_WRITE_VAR(i, plaPreheatFanSpeed); + EEPROM_WRITE_VAR(i, absPreheatHotendTemp); + EEPROM_WRITE_VAR(i, absPreheatHPBTemp); + EEPROM_WRITE_VAR(i, absPreheatFanSpeed); + EEPROM_WRITE_VAR(i, zprobe_zoffset); + + for (int e = 0; e < 4; e++) { + + #ifdef PIDTEMP + if (e < EXTRUDERS) { + EEPROM_WRITE_VAR(i, PID_PARAM(Kp, e)); + EEPROM_WRITE_VAR(i, PID_PARAM(Ki, e)); + EEPROM_WRITE_VAR(i, PID_PARAM(Kd, e)); #ifdef PID_ADD_EXTRUSION_RATE - EEPROM_WRITE_VAR(i,PID_PARAM(Kc,e)); - #else//PID_ADD_EXTRUSION_RATE - dummy = 1.0f; // 1.0 = default kc - EEPROM_WRITE_VAR(dummmy); - #endif//PID_ADD_EXTRUSION_RATE - } - else - { - dummy = 3000.0f; - EEPROM_WRITE_VAR(i, dummy); - dummy = 0.0f; - EEPROM_WRITE_VAR(i,dummy); - EEPROM_WRITE_VAR(i,dummy); - EEPROM_WRITE_VAR(i,dummy); - } - } - #else//PIDTEMP - float dummy = 3000.0f; - EEPROM_WRITE_VAR(i,dummy); - dummy = 0.0f; - EEPROM_WRITE_VAR(i,dummy); - EEPROM_WRITE_VAR(i,dummy); - EEPROM_WRITE_VAR(i,dummy); - #endif//PIDTEMP + EEPROM_WRITE_VAR(i, PID_PARAM(Kc, e)); + #else + dummy = 1.0f; // 1.0 = default kc + EEPROM_WRITE_VAR(dummmy); + #endif + } + else { + #else // !PIDTEMP + { + #endif // !PIDTEMP + + dummy = DUMMY_PID_VALUE; + EEPROM_WRITE_VAR(i, dummy); + dummy = 0.0f; + for (int q = 3; q--;) EEPROM_WRITE_VAR(i, dummy); + } + } // Extruders Loop + #ifndef DOGLCD int lcd_contrast = 32; - #endif//DOGLCD - EEPROM_WRITE_VAR(i,lcd_contrast); + #endif + EEPROM_WRITE_VAR(i, lcd_contrast); + #ifdef SCARA - EEPROM_WRITE_VAR(i,axis_scaling); // Add scaling for SCARA - #endif//SCARA + EEPROM_WRITE_VAR(i, axis_scaling); // 3 floats + #else + dummy = 1.0f; + EEPROM_WRITE_VAR(i, dummy); + #endif + #ifdef FWRETRACT - EEPROM_WRITE_VAR(i,autoretract_enabled); - EEPROM_WRITE_VAR(i,retract_length); - #if EXTRUDERS > 1 - EEPROM_WRITE_VAR(i,retract_length_swap); - #endif//EXTRUDERS > 1 - EEPROM_WRITE_VAR(i,retract_feedrate); - EEPROM_WRITE_VAR(i,retract_zlift); - EEPROM_WRITE_VAR(i,retract_recover_length); - #if EXTRUDERS > 1 - EEPROM_WRITE_VAR(i,retract_recover_length_swap); - #endif//EXTRUDERS > 1 - EEPROM_WRITE_VAR(i,retract_recover_feedrate); - #endif//FWRETRACT + EEPROM_WRITE_VAR(i, autoretract_enabled); + EEPROM_WRITE_VAR(i, retract_length); + #if EXTRUDERS > 1 + EEPROM_WRITE_VAR(i, retract_length_swap); + #else + dummy = 0.0f; + EEPROM_WRITE_VAR(i, dummy); + #endif + EEPROM_WRITE_VAR(i, retract_feedrate); + EEPROM_WRITE_VAR(i, retract_zlift); + EEPROM_WRITE_VAR(i, retract_recover_length); + #if EXTRUDERS > 1 + EEPROM_WRITE_VAR(i, retract_recover_length_swap); + #else + dummy = 0.0f; + EEPROM_WRITE_VAR(i, dummy); + #endif + EEPROM_WRITE_VAR(i, retract_recover_feedrate); + #endif // FWRETRACT + + EEPROM_WRITE_VAR(i, volumetric_enabled); // Save filament sizes - EEPROM_WRITE_VAR(i, volumetric_enabled); - EEPROM_WRITE_VAR(i, filament_size[0]); -#if EXTRUDERS > 1 - EEPROM_WRITE_VAR(i, filament_size[1]); -#if EXTRUDERS > 2 - EEPROM_WRITE_VAR(i, filament_size[2]); -#if EXTRUDERS > 3 - EEPROM_WRITE_VAR(i, filament_size[3]); -#endif //EXTRUDERS > 3 -#endif //EXTRUDERS > 2 -#endif //EXTRUDERS > 1 - - char ver2[4]=EEPROM_VERSION; - i=EEPROM_OFFSET; - EEPROM_WRITE_VAR(i,ver2); // validate data + for (int q = 0; q < 4; q++) { + if (q < EXTRUDERS) dummy = filament_size[q]; + EEPROM_WRITE_VAR(i, dummy); + } + + int storageSize = i; + + char ver2[4] = EEPROM_VERSION; + int j = EEPROM_OFFSET; + EEPROM_WRITE_VAR(j, ver2); // validate data + + // Report storage size SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Settings Stored"); + SERIAL_ECHOPAIR("Settings Stored (", (unsigned long)i); + SERIAL_ECHOLNPGM(" bytes)"); } -#endif //EEPROM_SETTINGS +void Config_RetrieveSettings() { -#ifndef DISABLE_M503 -void Config_PrintSettings() -{ // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Steps per unit:"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M92 X",axis_steps_per_unit[X_AXIS]); - SERIAL_ECHOPAIR(" Y",axis_steps_per_unit[Y_AXIS]); - SERIAL_ECHOPAIR(" Z",axis_steps_per_unit[Z_AXIS]); - SERIAL_ECHOPAIR(" E",axis_steps_per_unit[E_AXIS]); - SERIAL_ECHOLN(""); - - SERIAL_ECHO_START; -#ifdef SCARA -SERIAL_ECHOLNPGM("Scaling factors:"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M365 X",axis_scaling[X_AXIS]); - SERIAL_ECHOPAIR(" Y",axis_scaling[Y_AXIS]); - SERIAL_ECHOPAIR(" Z",axis_scaling[Z_AXIS]); - SERIAL_ECHOLN(""); - - SERIAL_ECHO_START; -#endif//SCARA - SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M203 X", max_feedrate[X_AXIS]); - SERIAL_ECHOPAIR(" Y", max_feedrate[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", max_feedrate[Z_AXIS]); - SERIAL_ECHOPAIR(" E", max_feedrate[E_AXIS]); - SERIAL_ECHOLN(""); + int i = EEPROM_OFFSET; + char stored_ver[4]; + char ver[4] = EEPROM_VERSION; + EEPROM_READ_VAR(i, stored_ver); //read stored version + // SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]"); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M201 X" ,max_acceleration_units_per_sq_second[X_AXIS] ); - SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[Y_AXIS] ); - SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[Z_AXIS] ); - SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[E_AXIS]); - SERIAL_ECHOLN(""); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M204 S",acceleration ); - SERIAL_ECHOPAIR(" T" ,retract_acceleration); - SERIAL_ECHOLN(""); + if (strncmp(ver, stored_ver, 3) != 0) { + Config_ResetDefault(); + } + else { + float dummy = 0; - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M205 S",minimumfeedrate ); - SERIAL_ECHOPAIR(" T" ,mintravelfeedrate ); - SERIAL_ECHOPAIR(" B" ,minsegmenttime ); - SERIAL_ECHOPAIR(" X" ,max_xy_jerk ); - SERIAL_ECHOPAIR(" Z" ,max_z_jerk); - SERIAL_ECHOPAIR(" E" ,max_e_jerk); - SERIAL_ECHOLN(""); + // version number match + EEPROM_READ_VAR(i, axis_steps_per_unit); + EEPROM_READ_VAR(i, max_feedrate); + EEPROM_READ_VAR(i, max_acceleration_units_per_sq_second); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Home offset (mm):"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M206 X",add_homing[X_AXIS] ); - SERIAL_ECHOPAIR(" Y" ,add_homing[Y_AXIS] ); - SERIAL_ECHOPAIR(" Z" ,add_homing[Z_AXIS] ); - SERIAL_ECHOLN(""); -#ifdef DELTA - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Endstop adjustement (mm):"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M666 X",endstop_adj[X_AXIS] ); - SERIAL_ECHOPAIR(" Y" ,endstop_adj[Y_AXIS] ); - SERIAL_ECHOPAIR(" Z" ,endstop_adj[Z_AXIS] ); - SERIAL_ECHOLN(""); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M665 L",delta_diagonal_rod ); - SERIAL_ECHOPAIR(" R" ,delta_radius ); - SERIAL_ECHOPAIR(" S" ,delta_segments_per_second ); - SERIAL_ECHOLN(""); -#endif//DELTA -#ifdef PIDTEMP - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("PID settings:"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp,0)); // for compatibility with hosts, only echos values for E0 - SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); - SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); - SERIAL_ECHOLN(""); -#endif//PIDTEMP -#ifdef FWRETRACT - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M207 S",retract_length); - SERIAL_ECHOPAIR(" F" ,retract_feedrate*60); - SERIAL_ECHOPAIR(" Z" ,retract_zlift); - SERIAL_ECHOLN(""); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M208 S",retract_recover_length); - SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60); - SERIAL_ECHOLN(""); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0)); - SERIAL_ECHOLN(""); -#if EXTRUDERS > 1 - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Multi-extruder settings:"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap); - SERIAL_ECHOLN(""); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap); - SERIAL_ECHOLN(""); -#endif//EXTRUDERS > 1 -#endif//FWRETRACT - SERIAL_ECHO_START; - if (volumetric_enabled) { - SERIAL_ECHOLNPGM("Filament settings:"); - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 D", filament_size[0]); - SERIAL_ECHOLN(""); -#if EXTRUDERS > 1 - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); - SERIAL_ECHOLN(""); -#if EXTRUDERS > 2 - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); - SERIAL_ECHOLN(""); -#if EXTRUDERS > 3 - SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); - SERIAL_ECHOLN(""); -#endif //EXTRUDERS > 3 -#endif //EXTRUDERS > 2 -#endif //EXTRUDERS > 1 - } else { - SERIAL_ECHOLNPGM("Filament settings: Disabled"); - } -#ifdef CUSTOM_M_CODES - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); - SERIAL_ECHO_START; - SERIAL_ECHO(" M"); - SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET); - SERIAL_ECHOPAIR(" Z",-zprobe_zoffset); - SERIAL_ECHOLN(""); -#endif -} -#endif//DISABLE_M503 - - -#ifdef EEPROM_SETTINGS -void Config_RetrieveSettings() -{ - int i=EEPROM_OFFSET; - char stored_ver[4]; - char ver[4]=EEPROM_VERSION; - EEPROM_READ_VAR(i,stored_ver); //read stored version - // SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]"); - if (strncmp(ver,stored_ver,3) == 0) - { - // version number match - EEPROM_READ_VAR(i,axis_steps_per_unit); - EEPROM_READ_VAR(i,max_feedrate); - EEPROM_READ_VAR(i,max_acceleration_units_per_sq_second); - // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) - reset_acceleration_rates(); - - EEPROM_READ_VAR(i,acceleration); - EEPROM_READ_VAR(i,retract_acceleration); - EEPROM_READ_VAR(i,minimumfeedrate); - EEPROM_READ_VAR(i,mintravelfeedrate); - EEPROM_READ_VAR(i,minsegmenttime); - EEPROM_READ_VAR(i,max_xy_jerk); - EEPROM_READ_VAR(i,max_z_jerk); - EEPROM_READ_VAR(i,max_e_jerk); - EEPROM_READ_VAR(i,add_homing); - #ifdef DELTA - EEPROM_READ_VAR(i,endstop_adj); - EEPROM_READ_VAR(i,delta_radius); - EEPROM_READ_VAR(i,delta_diagonal_rod); - EEPROM_READ_VAR(i,delta_segments_per_second); - #endif//DELTA - #ifndef ULTIPANEL - int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed; - int absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed; - #endif//ULTIPANEL - EEPROM_READ_VAR(i,plaPreheatHotendTemp); - EEPROM_READ_VAR(i,plaPreheatHPBTemp); - EEPROM_READ_VAR(i,plaPreheatFanSpeed); - EEPROM_READ_VAR(i,absPreheatHotendTemp); - EEPROM_READ_VAR(i,absPreheatHPBTemp); - EEPROM_READ_VAR(i,absPreheatFanSpeed); - EEPROM_READ_VAR(i,zprobe_zoffset); - #ifdef PIDTEMP - float dummy = 0.0f; - for (int e = 0; e < 4; e++) // 4 = max extruders supported by marlin - { - if (e < EXTRUDERS) - { - // do not need to scale PID values as the values in EEPROM are already scaled - EEPROM_READ_VAR(i,PID_PARAM(Kp,e)); - EEPROM_READ_VAR(i,PID_PARAM(Ki,e)); - EEPROM_READ_VAR(i,PID_PARAM(Kd,e)); -#ifdef PID_ADD_EXTRUSION_RATE - EEPROM_READ_VAR(i,PID_PARAM(Kc,e)); -#else//PID_ADD_EXTRUSION_RATE - EEPROM_READ_VAR(i,dummy); -#endif//PID_ADD_EXTRUSION_RATE - } - else - { - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - } - } - #else//PIDTEMP - // 4 x 3 = 12 slots for PID parameters - float dummy = 0.0f; - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - EEPROM_READ_VAR(i,dummy); - #endif//PIDTEMP - #ifndef DOGLCD - int lcd_contrast; - #endif//DOGLCD - EEPROM_READ_VAR(i,lcd_contrast); - #ifdef SCARA - EEPROM_READ_VAR(i,axis_scaling); - #endif//SCARA - - #ifdef FWRETRACT - EEPROM_READ_VAR(i,autoretract_enabled); - EEPROM_READ_VAR(i,retract_length); - #if EXTRUDERS > 1 - EEPROM_READ_VAR(i,retract_length_swap); - #endif//EXTRUDERS > 1 - EEPROM_READ_VAR(i,retract_feedrate); - EEPROM_READ_VAR(i,retract_zlift); - EEPROM_READ_VAR(i,retract_recover_length); - #if EXTRUDERS > 1 - EEPROM_READ_VAR(i,retract_recover_length_swap); - #endif//EXTRUDERS > 1 - EEPROM_READ_VAR(i,retract_recover_feedrate); - #endif//FWRETRACT - - EEPROM_READ_VAR(i, volumetric_enabled); - EEPROM_READ_VAR(i, filament_size[0]); -#if EXTRUDERS > 1 - EEPROM_READ_VAR(i, filament_size[1]); -#if EXTRUDERS > 2 - EEPROM_READ_VAR(i, filament_size[2]); -#if EXTRUDERS > 3 - EEPROM_READ_VAR(i, filament_size[3]); -#endif //EXTRUDERS > 3 -#endif //EXTRUDERS > 2 -#endif //EXTRUDERS > 1 - calculate_volumetric_multipliers(); - // Call updatePID (similar to when we have processed M301) - updatePID(); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM("Stored settings retrieved"); - } - else - { - Config_ResetDefault(); - } - #ifdef EEPROM_CHITCHAT - Config_PrintSettings(); - #endif//EEPROM_CHITCHAT -} -#endif//EEPROM_SETTINGS - -void Config_ResetDefault() -{ - float tmp1[]=DEFAULT_AXIS_STEPS_PER_UNIT; - float tmp2[]=DEFAULT_MAX_FEEDRATE; - long tmp3[]=DEFAULT_MAX_ACCELERATION; - for (short i=0;i<4;i++) - { - axis_steps_per_unit[i]=tmp1[i]; - max_feedrate[i]=tmp2[i]; - max_acceleration_units_per_sq_second[i]=tmp3[i]; - #ifdef SCARA - axis_scaling[i]=1; - #endif//SCARA - } - - // steps per sq second need to be updated to agree with the units per sq second reset_acceleration_rates(); - - acceleration=DEFAULT_ACCELERATION; - retract_acceleration=DEFAULT_RETRACT_ACCELERATION; - minimumfeedrate=DEFAULT_MINIMUMFEEDRATE; - minsegmenttime=DEFAULT_MINSEGMENTTIME; - mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE; - max_xy_jerk=DEFAULT_XYJERK; - max_z_jerk=DEFAULT_ZJERK; - max_e_jerk=DEFAULT_EJERK; - add_homing[X_AXIS] = add_homing[Y_AXIS] = add_homing[Z_AXIS] = 0; -#ifdef DELTA - endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0; - delta_radius= DELTA_RADIUS; - delta_diagonal_rod= DELTA_DIAGONAL_ROD; - delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; - recalc_delta_settings(delta_radius, delta_diagonal_rod); -#endif//DELTA -#ifdef ULTIPANEL + + EEPROM_READ_VAR(i, acceleration); + EEPROM_READ_VAR(i, retract_acceleration); + EEPROM_READ_VAR(i, minimumfeedrate); + EEPROM_READ_VAR(i, mintravelfeedrate); + EEPROM_READ_VAR(i, minsegmenttime); + EEPROM_READ_VAR(i, max_xy_jerk); + EEPROM_READ_VAR(i, max_z_jerk); + EEPROM_READ_VAR(i, max_e_jerk); + EEPROM_READ_VAR(i, add_homing); + + #ifdef DELTA + EEPROM_READ_VAR(i, endstop_adj); // 3 floats + EEPROM_READ_VAR(i, delta_radius); // 1 float + EEPROM_READ_VAR(i, delta_diagonal_rod); // 1 float + EEPROM_READ_VAR(i, delta_segments_per_second); // 1 float + #else + for (int q=6; q--;) EEPROM_READ_VAR(i, dummy); + #endif + + #ifndef ULTIPANEL + int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed, + absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed; + #endif + + EEPROM_READ_VAR(i, plaPreheatHotendTemp); + EEPROM_READ_VAR(i, plaPreheatHPBTemp); + EEPROM_READ_VAR(i, plaPreheatFanSpeed); + EEPROM_READ_VAR(i, absPreheatHotendTemp); + EEPROM_READ_VAR(i, absPreheatHPBTemp); + EEPROM_READ_VAR(i, absPreheatFanSpeed); + EEPROM_READ_VAR(i, zprobe_zoffset); + + #ifdef PIDTEMP + for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin + EEPROM_READ_VAR(i, dummy); + if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) { + // do not need to scale PID values as the values in EEPROM are already scaled + PID_PARAM(Kp, e) = dummy; + EEPROM_READ_VAR(i, PID_PARAM(Ki, e)); + EEPROM_READ_VAR(i, PID_PARAM(Kd, e)); + #ifdef PID_ADD_EXTRUSION_RATE + EEPROM_READ_VAR(i, PID_PARAM(Kc, e)); + #else + EEPROM_READ_VAR(i, dummy); + #endif + } + else { + for (int q=3; q--;) EEPROM_READ_VAR(i, dummy); + } + } + #else // !PIDTEMP + // 4 x 3 = 12 slots for PID parameters + for (int q=12; q--;) EEPROM_READ_VAR(i, dummy); + #endif // !PIDTEMP + + #ifndef DOGLCD + int lcd_contrast; + #endif + EEPROM_READ_VAR(i, lcd_contrast); + + #ifdef SCARA + EEPROM_READ_VAR(i, axis_scaling); // 3 floats + #else + EEPROM_READ_VAR(i, dummy); + #endif + + #ifdef FWRETRACT + EEPROM_READ_VAR(i, autoretract_enabled); + EEPROM_READ_VAR(i, retract_length); + #if EXTRUDERS > 1 + EEPROM_READ_VAR(i, retract_length_swap); + #else + EEPROM_READ_VAR(i, dummy); + #endif + EEPROM_READ_VAR(i, retract_feedrate); + EEPROM_READ_VAR(i, retract_zlift); + EEPROM_READ_VAR(i, retract_recover_length); + #if EXTRUDERS > 1 + EEPROM_READ_VAR(i, retract_recover_length_swap); + #else + EEPROM_READ_VAR(i, dummy); + #endif + EEPROM_READ_VAR(i, retract_recover_feedrate); + #endif // FWRETRACT + + EEPROM_READ_VAR(i, volumetric_enabled); + + for (int q = 0; q < 4; q++) { + EEPROM_READ_VAR(i, dummy); + if (q < EXTRUDERS) filament_size[q] = dummy; + } + + calculate_volumetric_multipliers(); + // Call updatePID (similar to when we have processed M301) + updatePID(); + + // Report settings retrieved and length + SERIAL_ECHO_START; + SERIAL_ECHO(ver); + SERIAL_ECHOPAIR(" stored settings retrieved (", (unsigned long)i); + SERIAL_ECHOLNPGM(" bytes)"); + } + + #ifdef EEPROM_CHITCHAT + Config_PrintSettings(); + #endif +} + +#endif // EEPROM_SETTINGS + +void Config_ResetDefault() { + float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT; + float tmp2[] = DEFAULT_MAX_FEEDRATE; + long tmp3[] = DEFAULT_MAX_ACCELERATION; + for (int i = 0; i < NUM_AXIS; i++) { + axis_steps_per_unit[i] = tmp1[i]; + max_feedrate[i] = tmp2[i]; + max_acceleration_units_per_sq_second[i] = tmp3[i]; + #ifdef SCARA + if (i < sizeof(axis_scaling) / sizeof(*axis_scaling)) + axis_scaling[i] = 1; + #endif + } + + // steps per sq second need to be updated to agree with the units per sq second + reset_acceleration_rates(); + + acceleration = DEFAULT_ACCELERATION; + retract_acceleration = DEFAULT_RETRACT_ACCELERATION; + minimumfeedrate = DEFAULT_MINIMUMFEEDRATE; + minsegmenttime = DEFAULT_MINSEGMENTTIME; + mintravelfeedrate = DEFAULT_MINTRAVELFEEDRATE; + max_xy_jerk = DEFAULT_XYJERK; + max_z_jerk = DEFAULT_ZJERK; + max_e_jerk = DEFAULT_EJERK; + add_homing[X_AXIS] = add_homing[Y_AXIS] = add_homing[Z_AXIS] = 0; + + #ifdef DELTA + endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0; + delta_radius = DELTA_RADIUS; + delta_diagonal_rod = DELTA_DIAGONAL_ROD; + delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND; + recalc_delta_settings(delta_radius, delta_diagonal_rod); + #endif + + #ifdef ULTIPANEL plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP; absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; -#endif//ULTIPANEL -#ifdef ENABLE_AUTO_BED_LEVELING + #endif + + #ifdef ENABLE_AUTO_BED_LEVELING zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER; -#endif//ENABLE_AUTO_BED_LEVELING -#ifdef DOGLCD + #endif + + #ifdef DOGLCD lcd_contrast = DEFAULT_LCD_CONTRAST; -#endif//DOGLCD -#ifdef PIDTEMP -#ifdef PID_PARAMS_PER_EXTRUDER - for (int e = 0; e < EXTRUDERS; e++) -#else // PID_PARAMS_PER_EXTRUDER - int e = 0; // only need to write once -#endif // PID_PARAMS_PER_EXTRUDER - { - PID_PARAM(Kp,e) = DEFAULT_Kp; - PID_PARAM(Ki,e) = scalePID_i(DEFAULT_Ki); - PID_PARAM(Kd,e) = scalePID_d(DEFAULT_Kd); + #endif + + #ifdef PIDTEMP + #ifdef PID_PARAMS_PER_EXTRUDER + for (int e = 0; e < EXTRUDERS; e++) + #else + int e = 0; // only need to write once + #endif + { + PID_PARAM(Kp, e) = DEFAULT_Kp; + PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki); + PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd); #ifdef PID_ADD_EXTRUSION_RATE - PID_PARAM(Kc,e) = DEFAULT_Kc; - #endif//PID_ADD_EXTRUSION_RATE + PID_PARAM(Kc, e) = DEFAULT_Kc; + #endif } // call updatePID (similar to when we have processed M301) updatePID(); -#endif//PIDTEMP + #endif // PIDTEMP -#ifdef FWRETRACT - autoretract_enabled = false; - retract_length = RETRACT_LENGTH; -#if EXTRUDERS > 1 - retract_length_swap = RETRACT_LENGTH_SWAP; -#endif//EXTRUDERS > 1 - retract_feedrate = RETRACT_FEEDRATE; - retract_zlift = RETRACT_ZLIFT; - retract_recover_length = RETRACT_RECOVER_LENGTH; -#if EXTRUDERS > 1 - retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; -#endif//EXTRUDERS > 1 - retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; -#endif//FWRETRACT + #ifdef FWRETRACT + autoretract_enabled = false; + retract_length = RETRACT_LENGTH; + #if EXTRUDERS > 1 + retract_length_swap = RETRACT_LENGTH_SWAP; + #endif + retract_feedrate = RETRACT_FEEDRATE; + retract_zlift = RETRACT_ZLIFT; + retract_recover_length = RETRACT_RECOVER_LENGTH; + #if EXTRUDERS > 1 + retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; + #endif + retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; + #endif - volumetric_enabled = false; - filament_size[0] = DEFAULT_NOMINAL_FILAMENT_DIA; -#if EXTRUDERS > 1 - filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA; -#if EXTRUDERS > 2 - filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA; -#if EXTRUDERS > 3 - filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA; -#endif //EXTRUDERS > 3 -#endif //EXTRUDERS > 2 -#endif //EXTRUDERS > 1 - calculate_volumetric_multipliers(); - -SERIAL_ECHO_START; -SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded"); + volumetric_enabled = false; + filament_size[0] = DEFAULT_NOMINAL_FILAMENT_DIA; + #if EXTRUDERS > 1 + filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA; + #if EXTRUDERS > 2 + filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA; + #if EXTRUDERS > 3 + filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA; + #endif + #endif + #endif + calculate_volumetric_multipliers(); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded"); } + +#ifndef DISABLE_M503 + +void Config_PrintSettings(bool forReplay) { + // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown + + SERIAL_ECHO_START; + + if (!forReplay) { + SERIAL_ECHOLNPGM("Steps per unit:"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M92 X", axis_steps_per_unit[X_AXIS]); + SERIAL_ECHOPAIR(" Y", axis_steps_per_unit[Y_AXIS]); + SERIAL_ECHOPAIR(" Z", axis_steps_per_unit[Z_AXIS]); + SERIAL_ECHOPAIR(" E", axis_steps_per_unit[E_AXIS]); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; + + #ifdef SCARA + if (!forReplay) { + SERIAL_ECHOLNPGM("Scaling factors:"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M365 X", axis_scaling[X_AXIS]); + SERIAL_ECHOPAIR(" Y", axis_scaling[Y_AXIS]); + SERIAL_ECHOPAIR(" Z", axis_scaling[Z_AXIS]); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + #endif // SCARA + + if (!forReplay) { + SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M203 X", max_feedrate[X_AXIS]); + SERIAL_ECHOPAIR(" Y", max_feedrate[Y_AXIS]); + SERIAL_ECHOPAIR(" Z", max_feedrate[Z_AXIS]); + SERIAL_ECHOPAIR(" E", max_feedrate[E_AXIS]); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M201 X", max_acceleration_units_per_sq_second[X_AXIS] ); + SERIAL_ECHOPAIR(" Y", max_acceleration_units_per_sq_second[Y_AXIS] ); + SERIAL_ECHOPAIR(" Z", max_acceleration_units_per_sq_second[Z_AXIS] ); + SERIAL_ECHOPAIR(" E", max_acceleration_units_per_sq_second[E_AXIS]); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M204 S", acceleration ); + SERIAL_ECHOPAIR(" T", retract_acceleration); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M205 S", minimumfeedrate ); + SERIAL_ECHOPAIR(" T", mintravelfeedrate ); + SERIAL_ECHOPAIR(" B", minsegmenttime ); + SERIAL_ECHOPAIR(" X", max_xy_jerk ); + SERIAL_ECHOPAIR(" Z", max_z_jerk); + SERIAL_ECHOPAIR(" E", max_e_jerk); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Home offset (mm):"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M206 X", add_homing[X_AXIS] ); + SERIAL_ECHOPAIR(" Y", add_homing[Y_AXIS] ); + SERIAL_ECHOPAIR(" Z", add_homing[Z_AXIS] ); + SERIAL_ECHOLN(""); + + #ifdef DELTA + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Endstop adjustement (mm):"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS] ); + SERIAL_ECHOPAIR(" Y", endstop_adj[Y_AXIS] ); + SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS] ); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod ); + SERIAL_ECHOPAIR(" R", delta_radius ); + SERIAL_ECHOPAIR(" S", delta_segments_per_second ); + SERIAL_ECHOLN(""); + #endif // DELTA + + #ifdef PIDTEMP + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("PID settings:"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echos values for E0 + SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); + SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); + SERIAL_ECHOLN(""); + #endif // PIDTEMP + + #ifdef FWRETRACT + + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M207 S", retract_length); + SERIAL_ECHOPAIR(" F", retract_feedrate*60); + SERIAL_ECHOPAIR(" Z", retract_zlift); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M208 S", retract_recover_length); + SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0)); + SERIAL_ECHOLN(""); + + #if EXTRUDERS > 1 + if (!forReplay) { + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Multi-extruder settings:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap); + SERIAL_ECHOLN(""); + } + #endif // EXTRUDERS > 1 + + #endif // FWRETRACT + + SERIAL_ECHO_START; + if (volumetric_enabled) { + if (!forReplay) { + SERIAL_ECHOLNPGM("Filament settings:"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M200 D", filament_size[0]); + SERIAL_ECHOLN(""); + + #if EXTRUDERS > 1 + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); + SERIAL_ECHOLN(""); + #if EXTRUDERS > 2 + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); + SERIAL_ECHOLN(""); + #if EXTRUDERS > 3 + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); + SERIAL_ECHOLN(""); + #endif + #endif + #endif + + } else { + if (!forReplay) { + SERIAL_ECHOLNPGM("Filament settings: Disabled"); + } + } + + #ifdef CUSTOM_M_CODES + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); + SERIAL_ECHO_START; + } + SERIAL_ECHO(" M"); + SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET); + SERIAL_ECHOPAIR(" Z", -zprobe_zoffset); + SERIAL_ECHOLN(""); + #endif +} + +#endif // !DISABLE_M503 diff --git a/Marlin/ConfigurationStore.h b/Marlin/ConfigurationStore.h index 4f68b13a6a..d117d37fb2 100644 --- a/Marlin/ConfigurationStore.h +++ b/Marlin/ConfigurationStore.h @@ -6,17 +6,17 @@ void Config_ResetDefault(); #ifndef DISABLE_M503 -void Config_PrintSettings(); + void Config_PrintSettings(bool forReplay=false); #else -FORCE_INLINE void Config_PrintSettings() {} + FORCE_INLINE void Config_PrintSettings(bool forReplay=false) {} #endif #ifdef EEPROM_SETTINGS -void Config_StoreSettings(); -void Config_RetrieveSettings(); + void Config_StoreSettings(); + void Config_RetrieveSettings(); #else -FORCE_INLINE void Config_StoreSettings() {} -FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); } + FORCE_INLINE void Config_StoreSettings() {} + FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); } #endif -#endif//CONFIG_STORE_H +#endif // __CONFIG_STORE_H diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 7c4405e0d0..16030c795c 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -164,7 +164,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -// M503 - print the current settings (from memory not from EEPROM) +// M503 - print the current settings (from memory not from EEPROM). Use S0 to leave off headings. // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M665 - set delta configurations @@ -3581,7 +3581,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp break; case 503: // M503 print settings currently in memory { - Config_PrintSettings(); + Config_PrintSettings(code_seen('S') && code_value == 0); } break; #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED