Add labels, condition for BTT GTR M5 pins (#20772)

Co-Authored-By: NAPCAL <47440988+NAPCAL@users.noreply.github.com>
This commit is contained in:
Scott Lahteine 2021-01-22 15:15:01 -06:00
parent d33fe2378c
commit 09d07f76b3

View File

@ -39,6 +39,7 @@
#define HAS_OTG_USB_HOST_SUPPORT
#define TP // Enable to define servo and probe pins
#define M5_EXTENDER // The M5 extender is attached
//
// Servos
@ -101,11 +102,13 @@
//
// Pins on the extender
//
//#define X_MIN_PIN PI4
//#define X2_MIN_PIN PF12
//#define Y_MIN_PIN PF4
//#define Y2_MIN_PIN PI7
//#define Z_MIN_PIN PF6
#if ENABLED(M5_EXTENDER)
#define X2_STOP_PIN PI4 // M5 M1_STOP
#define Y2_STOP_PIN PF12 // M5 M5_STOP
#define Z2_STOP_PIN PF4 // M5 M2_STOP
#define Z3_STOP_PIN PI7 // M5 M4_STOP
#define Z4_STOP_PIN PF6 // M5 M3_STOP
#endif
#if ENABLED(TP) && !defined(Z_MIN_PROBE_PIN)
#define Z_MIN_PROBE_PIN PH11 // Z Probe must be PH11
@ -156,39 +159,43 @@
#define E2_CS_PIN PC12
#endif
#define E3_STEP_PIN PF3
#define E3_DIR_PIN PG3
#define E3_ENABLE_PIN PF8
#ifndef E3_CS_PIN
#define E3_CS_PIN PG4
#endif
#if ENABLED(M5_EXTENDER)
#define E4_STEP_PIN PD14
#define E4_DIR_PIN PD11
#define E4_ENABLE_PIN PG2
#ifndef E4_CS_PIN
#define E4_CS_PIN PE15
#endif
#define E3_STEP_PIN PF3
#define E3_DIR_PIN PG3
#define E3_ENABLE_PIN PF8
#ifndef E3_CS_PIN
#define E3_CS_PIN PG4
#endif
#define E5_STEP_PIN PE12
#define E5_DIR_PIN PE10
#define E5_ENABLE_PIN PF14
#ifndef E5_CS_PIN
#define E5_CS_PIN PE7
#endif
#define E4_STEP_PIN PD14
#define E4_DIR_PIN PD11
#define E4_ENABLE_PIN PG2
#ifndef E4_CS_PIN
#define E4_CS_PIN PE15
#endif
#define E6_STEP_PIN PG0
#define E6_DIR_PIN PG1
#define E6_ENABLE_PIN PE8
#ifndef E6_CS_PIN
#define E6_CS_PIN PF15
#endif
#define E5_STEP_PIN PE12
#define E5_DIR_PIN PE10
#define E5_ENABLE_PIN PF14
#ifndef E5_CS_PIN
#define E5_CS_PIN PE7
#endif
#define E6_STEP_PIN PG0
#define E6_DIR_PIN PG1
#define E6_ENABLE_PIN PE8
#ifndef E6_CS_PIN
#define E6_CS_PIN PF15
#endif
#define E7_STEP_PIN PH12
#define E7_DIR_PIN PH15
#define E7_ENABLE_PIN PI0
#ifndef E7_CS_PIN
#define E7_CS_PIN PH14
#endif
#define E7_STEP_PIN PH12
#define E7_DIR_PIN PH15
#define E7_ENABLE_PIN PI0
#ifndef E7_CS_PIN
#define E7_CS_PIN PH14
#endif
//
@ -222,11 +229,11 @@
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//#define E5_HARDWARE_SERIAL Serial1
//#define E6_HARDWARE_SERIAL Serial1
//#define E7_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1 // M5 MOTOR 1
//#define E4_HARDWARE_SERIAL Serial1 // M5 MOTOR 2
//#define E5_HARDWARE_SERIAL Serial1 // M5 MOTOR 3
//#define E6_HARDWARE_SERIAL Serial1 // M5 MOTOR 4
//#define E7_HARDWARE_SERIAL Serial1 // M5 MOTOR 5
//
// Software serial
@ -249,20 +256,22 @@
#define E2_SERIAL_TX_PIN PC12
#define E2_SERIAL_RX_PIN PC12
#define E3_SERIAL_TX_PIN PG4
#define E3_SERIAL_RX_PIN PG4
#if ENABLED(M5_EXTENDER)
#define E3_SERIAL_TX_PIN PG4
#define E3_SERIAL_RX_PIN PG4
#define E4_SERIAL_TX_PIN PE15
#define E4_SERIAL_RX_PIN PE15
#define E4_SERIAL_TX_PIN PE15
#define E4_SERIAL_RX_PIN PE15
#define E5_SERIAL_TX_PIN PE7
#define E5_SERIAL_RX_PIN PE7
#define E5_SERIAL_TX_PIN PE7
#define E5_SERIAL_RX_PIN PE7
#define E6_SERIAL_TX_PIN PF15
#define E6_SERIAL_RX_PIN PF15
#define E6_SERIAL_TX_PIN PF15
#define E6_SERIAL_RX_PIN PF15
#define E7_SERIAL_TX_PIN PH14
#define E7_SERIAL_RX_PIN PH14
#define E7_SERIAL_TX_PIN PH14
#define E7_SERIAL_RX_PIN PH14
#endif
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -275,11 +284,13 @@
#define TEMP_1_PIN PC2 // T2 <-> E1
#define TEMP_2_PIN PC3 // T3 <-> E2
#define TEMP_3_PIN PA3 // T4 <-> E3
#define TEMP_4_PIN PF9 // T5 <-> E4
#define TEMP_5_PIN PF10 // T6 <-> E5
#define TEMP_6_PIN PF7 // T7 <-> E6
#define TEMP_7_PIN PF5 // T8 <-> E7
#if ENABLED(M5_EXTENDER)
#define TEMP_3_PIN PA3 // M5 TEMP1
#define TEMP_4_PIN PF9 // M5 TEMP2
#define TEMP_5_PIN PF10 // M5 TEMP3
#define TEMP_6_PIN PF7 // M5 TEMP4
#define TEMP_7_PIN PF5 // M5 TEMP5
#endif
#define TEMP_BED_PIN PC0 // T0 <-> Bed
@ -289,8 +300,8 @@
#define THERMO_SCK_PIN PI1 // SCK
#define THERMO_DO_PIN PI2 // MISO
#define THERMO_CS1_PIN PH9 // CS1
#define THERMO_CS2_PIN PH2 // CS2
#define THERMO_CS1_PIN PH9 // GTR K-TEMP
#define THERMO_CS2_PIN PH2 // M5 K-TEMP
#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
@ -304,11 +315,13 @@
#define HEATER_1_PIN PA1 // Heater1
#define HEATER_2_PIN PB0 // Heater2
#define HEATER_3_PIN PD15 // Heater3
#define HEATER_4_PIN PD13 // Heater4
#define HEATER_5_PIN PD12 // Heater5
#define HEATER_6_PIN PE13 // Heater6
#define HEATER_7_PIN PI6 // Heater7
#if ENABLED(M5_EXTENDER)
#define HEATER_3_PIN PD15 // M5 HEAT1
#define HEATER_4_PIN PD13 // M5 HEAT2
#define HEATER_5_PIN PD12 // M5 HEAT3
#define HEATER_6_PIN PE13 // M5 HEAT4
#define HEATER_7_PIN PI6 // M5 HEAT5
#endif
#define HEATER_BED_PIN PA2 // Hotbed
@ -316,11 +329,13 @@
#define FAN1_PIN PE6 // Fan1
#define FAN2_PIN PC8 // Fan2
#define FAN3_PIN PI5 // Fan3
#define FAN4_PIN PE9 // Fan4
#define FAN5_PIN PE11 // Fan5
//#define FAN6_PIN PC9 // Fan6
//#define FAN7_PIN PE14 // Fan7
#if ENABLED(M5_EXTENDER)
#define FAN3_PIN PI5 // M5 FAN1
#define FAN4_PIN PE9 // M5 FAN2
#define FAN5_PIN PE11 // M5 FAN3
//#define FAN6_PIN PC9 // M5 FAN4
//#define FAN7_PIN PE14 // M5 FAN5
#endif
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
@ -456,3 +471,4 @@
#endif // HAS_WIRED_LCD
#undef TP
#undef M5_EXTENDER