Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
K8200: Example configuration back in sync
This commit is contained in:
Scott Lahteine
GitHub
commit
0be6167f14
@ -20,13 +20,6 @@
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Sample configuration file for Vellemann K8200
|
||||
* tested on K8200 with VM8201 (Display)
|
||||
* and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
|
||||
* https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
|
||||
*/
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
@ -58,6 +51,22 @@
|
||||
*/
|
||||
#define CONFIGURATION_H_VERSION 010100
|
||||
|
||||
/**
|
||||
* Sample configuration file for Vellemann K8200
|
||||
* tested on K8200 with VM8201 (Display)
|
||||
* and Arduino 1.6.12 (Mac OS X) by @CONSULitAS, 2016-11-18
|
||||
* https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip
|
||||
*
|
||||
* Please choose your hardware options for the K8200:
|
||||
*/
|
||||
|
||||
// VM8201 Display unit
|
||||
#define K8200_VM8201
|
||||
// K8204 Z axis upgrade rod and coupler -> TODO
|
||||
// #define K8200_K8204
|
||||
// K8203 direct drive extruder -> TODO
|
||||
// #define K8200_K8203
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
//===========================================================================
|
||||
@ -146,7 +155,11 @@
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
#define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
|
||||
#if ENABLED(K8200_VM8201)
|
||||
#define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
|
||||
#else
|
||||
#define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display)
|
||||
#endif
|
||||
|
||||
// This defines the number of extruders
|
||||
// :[1, 2, 3, 4]
|
||||
@ -194,7 +207,7 @@
|
||||
*
|
||||
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
|
||||
*/
|
||||
#define POWER_SUPPLY 1
|
||||
#define POWER_SUPPLY 0
|
||||
|
||||
#if POWER_SUPPLY > 0
|
||||
// Enable this option to leave the PSU off at startup.
|
||||
@ -274,7 +287,7 @@
|
||||
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
|
||||
|
||||
// Bed temperature must be close to target for this long before M190 returns success
|
||||
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
|
||||
#define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
|
||||
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
|
||||
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
|
||||
|
||||
@ -466,9 +479,9 @@
|
||||
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
@ -492,13 +505,12 @@
|
||||
* Default Axis Steps Per Unit (steps/mm)
|
||||
* Override with M92
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } // default steps per unit for K8200
|
||||
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600} // for K8200
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 500 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
@ -583,9 +595,9 @@
|
||||
// | |
|
||||
// O-- FRONT --+
|
||||
// (0,0)
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 8000
|
||||
@ -660,7 +672,7 @@
|
||||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
|
||||
//
|
||||
@ -680,7 +692,7 @@
|
||||
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||
#define DISABLE_X false
|
||||
#define DISABLE_Y false
|
||||
#define DISABLE_Z false // not for K8200 -> looses Steps
|
||||
#define DISABLE_Z false
|
||||
// Warn on display about possibly reduced accuracy
|
||||
//#define DISABLE_REDUCED_ACCURACY_WARNING
|
||||
|
||||
@ -693,7 +705,7 @@
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR false // was true -> why for K8200?
|
||||
#define INVERT_Y_DIR false // K8200: false
|
||||
#define INVERT_Z_DIR false
|
||||
|
||||
// @section extruder
|
||||
@ -705,8 +717,8 @@
|
||||
#define INVERT_E3_DIR true
|
||||
|
||||
// @section homing
|
||||
|
||||
//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// K8200: it is usual to have clamps for the glass plate on the heatbed
|
||||
#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure you have this distance over your Z_MAX_POS in case.
|
||||
|
||||
// ENDSTOP SETTINGS:
|
||||
@ -883,7 +895,7 @@
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//define this to enable EEPROM support
|
||||
#define EEPROM_SETTINGS
|
||||
#define EEPROM_SETTINGS // K8200: uses EEPROM by default
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
// To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
|
||||
@ -917,12 +929,12 @@
|
||||
// @section temperature
|
||||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_TEMP_HOTEND 190
|
||||
#define PREHEAT_1_TEMP_BED 50 // K8200: set back to 70 if you have an upgraded heatbed power supply
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 60 // K8200: set back to 110 if you have an upgraded heatbed power supply
|
||||
#define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
//
|
||||
@ -1024,7 +1036,7 @@
|
||||
// - Total time printing
|
||||
//
|
||||
// This information can be viewed by the M78 command.
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
//============================= LCD and SD support ============================
|
||||
@ -1032,6 +1044,9 @@
|
||||
|
||||
// @section lcd
|
||||
|
||||
// K8200: for Display VM8201 with SD slot
|
||||
#if ENABLED(K8200_VM8201)
|
||||
|
||||
//
|
||||
// LCD LANGUAGE
|
||||
//
|
||||
@ -1066,7 +1081,7 @@
|
||||
//
|
||||
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
|
||||
//
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201
|
||||
#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware
|
||||
|
||||
//
|
||||
// LCD TYPE
|
||||
@ -1104,7 +1119,7 @@
|
||||
//
|
||||
// Use CRC checks and retries on the SD communication.
|
||||
//
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
// ENCODER SETTINGS
|
||||
@ -1112,13 +1127,13 @@
|
||||
// This option overrides the default number of encoder pulses needed to
|
||||
// produce one step. Should be increased for high-resolution encoders.
|
||||
//
|
||||
//#define ENCODER_PULSES_PER_STEP 1
|
||||
#define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step
|
||||
|
||||
//
|
||||
// Use this option to override the number of step signals required to
|
||||
// move between next/prev menu items.
|
||||
//
|
||||
//#define ENCODER_STEPS_PER_MENU_ITEM 5
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item
|
||||
|
||||
/**
|
||||
* Encoder Direction Options
|
||||
@ -1143,14 +1158,14 @@
|
||||
// If CLOCKWISE normally moves DOWN this makes it go UP.
|
||||
// If CLOCKWISE normally moves UP this makes it go DOWN.
|
||||
//
|
||||
//#define REVERSE_MENU_DIRECTION
|
||||
#define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side
|
||||
|
||||
//
|
||||
// Individual Axis Homing
|
||||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
|
||||
//
|
||||
// SPEAKER/BUZZER
|
||||
@ -1180,7 +1195,7 @@
|
||||
//
|
||||
// ULTIMAKER Controller.
|
||||
//
|
||||
//#define ULTIMAKERCONTROLLER
|
||||
#define ULTIMAKERCONTROLLER // K8200: for Display VM8201
|
||||
|
||||
//
|
||||
// ULTIPANEL as seen on Thingiverse.
|
||||
@ -1338,6 +1353,8 @@
|
||||
//
|
||||
//#define SAV_3DLCD
|
||||
|
||||
#endif // K8200_VM8201
|
||||
|
||||
//=============================================================================
|
||||
//=============================== Extra Features ==============================
|
||||
//=============================================================================
|
||||
|
||||
@ -20,12 +20,6 @@
|
||||
*
|
||||
*/
|
||||
|
||||
// Sample configuration file for Vellemann K8200
|
||||
// tested on K8200 with VM8201 (Display)
|
||||
// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
|
||||
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
|
||||
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
@ -36,6 +30,15 @@
|
||||
* Basic settings can be found in Configuration.h
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Sample configuration file for Vellemann K8200
|
||||
* tested on K8200 with VM8201 (Display)
|
||||
* and Arduino 1.6.12 (Mac) by @CONSULitAS, 2016-11-18
|
||||
* https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef CONFIGURATION_ADV_H
|
||||
#define CONFIGURATION_ADV_H
|
||||
|
||||
@ -80,6 +83,7 @@
|
||||
* If you get false positives for "Thermal Runaway" increase THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
// K8200 has weak heaters/power supply by default, so you have to relax!
|
||||
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius
|
||||
|
||||
@ -92,16 +96,19 @@
|
||||
* If you get false positives for "Heating failed" increase WATCH_TEMP_PERIOD and/or decrease WATCH_TEMP_INCREASE
|
||||
* WATCH_TEMP_INCREASE should not be below 2.
|
||||
*/
|
||||
// K8200 has weak heaters/power supply by default, so you have to relax!
|
||||
#define WATCH_TEMP_PERIOD 30 // Seconds
|
||||
#define WATCH_TEMP_INCREASE 4 // Degrees Celsius
|
||||
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the bed are just as above for hotends.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
|
||||
// K8200 has weak heaters/power supply by default, so you have to relax!
|
||||
// the default bed is so weak, that you can hardly go over 75°C
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Whenever an M140 or M190 increases the target temperature the firmware will wait for the
|
||||
@ -358,7 +365,7 @@
|
||||
// Default stepper release if idle. Set to 0 to deactivate.
|
||||
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
|
||||
// Time can be set by M18 and M84.
|
||||
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
|
||||
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
|
||||
#define DISABLE_INACTIVE_X true
|
||||
#define DISABLE_INACTIVE_Y true
|
||||
#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.
|
||||
@ -535,7 +542,7 @@
|
||||
//#define LIN_ADVANCE
|
||||
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
#define LIN_ADVANCE_K 75
|
||||
#define LIN_ADVANCE_K 140 // start value for PLA on K8200
|
||||
#endif
|
||||
|
||||
// @section leveling
|
||||
@ -567,7 +574,7 @@
|
||||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
#define MIN_STEPS_PER_SEGMENT 3
|
||||
#define MIN_STEPS_PER_SEGMENT 6
|
||||
|
||||
// The minimum pulse width (in µs) for stepping a stepper.
|
||||
// Set this if you find stepping unreliable, or if using a very fast CPU.
|
||||
@ -605,7 +612,7 @@
|
||||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 128
|
||||
|
||||
// Enable an emergency-command parser to intercept certain commands as they
|
||||
// enter the serial receive buffer, so they cannot be blocked.
|
||||
@ -644,9 +651,9 @@
|
||||
|
||||
// Add support for experimental filament exchange support M600; requires display
|
||||
#if ENABLED(ULTIPANEL)
|
||||
// #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too)
|
||||
#define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too)
|
||||
#if ENABLED(FILAMENT_CHANGE_FEATURE)
|
||||
#define FILAMENT_CHANGE_X_POS 3 // X position of hotend
|
||||
#define FILAMENT_CHANGE_X_POS (X_MAX_POS-3) // X position of hotend
|
||||
#define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend
|
||||
#define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift)
|
||||
#define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
* VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
|
||||
* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
|
||||
|
||||
I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.1 for Windows (SD library added to IDE manually) - everything works well.
|
||||
I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.
|
||||
|
||||
**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)**
|
||||
* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user