Update copyright in headers
This commit is contained in:
parent
894f5c24a8
commit
0feeef2604
.gitignore
Marlin
Configuration.hConfiguration_adv.h
src/HAL
HAL_AVR
HAL.cppHAL.hHAL_spi_AVR.cppMarlinSerial.cppMarlinSerial.hSanityCheck.hServoTimers.hendstop_interrupts.hfastio_1280.hfastio_1281.hfastio_168.hfastio_644.hfastio_AT90USB.hfastio_AVR.hmath_AVR.hpersistent_store_eeprom.cpppinsDebug.hpinsDebug_Teensyduino.hpinsDebug_plus_70.hservo_AVR.cppspi_pins.hwatchdog_AVR.cppwatchdog_AVR.h
HAL_DUE
DebugMonitor_Due.cppHAL.cppHAL.hHAL_spi_Due.cppHAL_timers_Due.cppHAL_timers_Due.hInterruptVectors_Due.cppInterruptVectors_Due.hMarlinSerialUSB_Due.cppMarlinSerialUSB_Due.hMarlinSerial_Due.cppMarlinSerial_Due.hSanityCheck.hServo_Due.cppTone.cppendstop_interrupts.hfastio_Due.hpersistent_store_eeprom.cpppinsDebug.hspi_pins.hu8g_com_HAL_DUE_shared_hw_spi.cppu8g_com_HAL_DUE_st7920_sw_spi.cppwatchdog_Due.cppwatchdog_Due.h
HAL_ESP32
HAL.cppHAL.hHAL_spi_ESP32.cppHAL_timers_ESP32.cppHAL_timers_ESP32.hSanityCheck.hendstop_interrupts.hfastio_ESP32.hi2s.cppi2s.hota.cppota.hservotimers.hspi_pins.hwatchdog_ESP32.cppwatchdog_ESP32.h
HAL_LPC1768
DebugMonitor_LPC1768.cppHAL.cppHAL.hHAL_spi.cppHAL_timers.cppHAL_timers.hMarlinSerial.cppMarlinSerial.hMarlinServo.hSanityCheck.hendstop_interrupts.hfastio.h
include
persistent_store_api.hpersistent_store_flash.cpppersistent_store_sdcard.cpppinsDebug.hspi_pins.hu8g
HAL_LCD_I2C_routines.cHAL_LCD_I2C_routines.hHAL_LCD_defines.hHAL_LCD_delay.hHAL_LCD_pin_routines.cHAL_LCD_pin_routines.hu8g_com_HAL_LPC1768_hw_spi.cppu8g_com_HAL_LPC1768_ssd_hw_i2c.cppu8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under constructionu8g_com_HAL_LPC1768_st7920_hw_spi.cppu8g_com_HAL_LPC1768_st7920_sw_spi.cppu8g_com_HAL_LPC1768_sw_spi.cpp
watchdog.cppwatchdog.h
2
.gitignore
vendored
2
.gitignore
vendored
@ -1,6 +1,6 @@
|
|||||||
#
|
#
|
||||||
# Marlin 3D Printer Firmware
|
# Marlin 3D Printer Firmware
|
||||||
# Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
# Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
#
|
#
|
||||||
# Based on Sprinter and grbl.
|
# Based on Sprinter and grbl.
|
||||||
# Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
# Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/* **************************************************************************
|
/* **************************************************************************
|
||||||
|
|
||||||
Marlin 3D Printer Firmware
|
Marlin 3D Printer Firmware
|
||||||
Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
|
||||||
Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
|
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
*
|
*
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
*
|
*
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License as published by
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,22 +1,24 @@
|
|||||||
/* **************************************************************************
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
Marlin 3D Printer Firmware
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
*
|
||||||
Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
This program is free software: you can redistribute it and/or modify
|
*
|
||||||
it under the terms of the GNU General Public License as published by
|
* This program is free software: you can redistribute it and/or modify
|
||||||
the Free Software Foundation, either version 3 of the License, or
|
* it under the terms of the GNU General Public License as published by
|
||||||
(at your option) any later version.
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
This program is distributed in the hope that it will be useful,
|
*
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
* This program is distributed in the hope that it will be useful,
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
GNU General Public License for more details.
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
You should have received a copy of the GNU General Public License
|
*
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* You should have received a copy of the GNU General Public License
|
||||||
****************************************************************************/
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
#ifdef TARGET_LPC1768
|
#ifdef TARGET_LPC1768
|
||||||
|
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
*
|
*
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
*
|
*
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
*
|
*
|
||||||
* This program is free software: you can redistribute it and/or modify
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
*
|
*
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||||
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
@ -1,6 +1,6 @@
|
|||||||
/**
|
/**
|
||||||
* Marlin 3D Printer Firmware
|
* Marlin 3D Printer Firmware
|
||||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
*
|
*
|
||||||
* Based on Sprinter and grbl.
|
* Based on Sprinter and grbl.
|
||||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user