🐛 Fix MILLISECONDS_PREHEAT_TIME / mintemp (#24967)

This commit is contained in:
studiodyne 2022-11-27 04:29:13 +01:00 committed by Scott Lahteine
parent 3a28a1fd1d
commit 12017887f4
2 changed files with 10 additions and 3 deletions

View File

@ -2330,8 +2330,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif #endif
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED < 5 #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED < 5
#error "Thermistor 66 requires MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED ≥ 5." #error "Thermistor 66 requires MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED ≥ 5."
#elif MILLISECONDS_PREHEAT_TIME < 30000 #elif MILLISECONDS_PREHEAT_TIME < 15000
#error "Thermistor 66 requires MILLISECONDS_PREHEAT_TIME ≥ 30000." #error "Thermistor 66 requires MILLISECONDS_PREHEAT_TIME ≥ 15000, but 30000 or higher is recommended."
#endif #endif
#undef _BAD_MINTEMP #undef _BAD_MINTEMP
#endif #endif

View File

@ -2406,8 +2406,15 @@ void Temperature::updateTemperaturesFromRawValues() {
if ((neg && r < temp_range[e].raw_max) || (pos && r > temp_range[e].raw_max)) if ((neg && r < temp_range[e].raw_max) || (pos && r > temp_range[e].raw_max))
max_temp_error((heater_id_t)e); max_temp_error((heater_id_t)e);
/**
// DEBUG PREHEATING TIME
SERIAL_ECHOLNPGM("\nExtruder = ", e, " Preheat On/Off = ", is_preheating(e));
const float test_is_preheating = (preheat_end_time[HOTEND_INDEX] - millis()) * 0.001f;
if (test_is_preheating < 31) SERIAL_ECHOLNPGM("Extruder = ", e, " Preheat remaining time = ", test_is_preheating, "s", "\n");
//*/
const bool heater_on = temp_hotend[e].target > 0; const bool heater_on = temp_hotend[e].target > 0;
if (heater_on && ((neg && r > temp_range[e].raw_min) || (pos && r < temp_range[e].raw_min))) { if (heater_on && !is_preheating(e) && ((neg && r > temp_range[e].raw_min) || (pos && r < temp_range[e].raw_min))) {
if (TERN1(MULTI_MAX_CONSECUTIVE_LOW_TEMP_ERR, ++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED)) if (TERN1(MULTI_MAX_CONSECUTIVE_LOW_TEMP_ERR, ++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED))
min_temp_error((heater_id_t)e); min_temp_error((heater_id_t)e);
} }