UBL no longer needs ubl_state

This commit is contained in:
Scott Lahteine 2017-10-13 21:56:27 -05:00
parent 8dd08425fd
commit 1344ca4b2f
5 changed files with 24 additions and 33 deletions

View File

@ -65,10 +65,9 @@
safe_delay(10);
}
ubl_state unified_bed_leveling::state;
int8_t unified_bed_leveling::storage_slot;
float unified_bed_leveling::z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y],
unified_bed_leveling::last_specified_z;
float unified_bed_leveling::z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
// 15 is the maximum nubmer of grid points supported + 1 safety margin for now,
// until determinism prevails
@ -91,12 +90,11 @@
void unified_bed_leveling::reset() {
set_bed_leveling_enabled(false);
state.storage_slot = -1;
storage_slot = -1;
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
planner.set_z_fade_height(10.0);
#endif
ZERO(z_values);
last_specified_z = -999.9;
}
void unified_bed_leveling::invalidate() {

View File

@ -70,16 +70,9 @@ extern uint8_t ubl_cnt;
#define MESH_X_DIST (float(UBL_MESH_MAX_X - (UBL_MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
#define MESH_Y_DIST (float(UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))
typedef struct {
bool active = false;
int8_t storage_slot = -1;
} ubl_state;
class unified_bed_leveling {
private:
static float last_specified_z;
static int g29_verbose_level,
g29_phase_value,
g29_repetition_cnt,
@ -161,7 +154,7 @@ class unified_bed_leveling {
static void G26();
#endif
static ubl_state state;
static int8_t storage_slot;
static float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];

View File

@ -424,8 +424,8 @@
#endif // HAS_BED_PROBE
if (parser.seen('P')) {
if (WITHIN(g29_phase_value, 0, 1) && state.storage_slot == -1) {
state.storage_slot = 0;
if (WITHIN(g29_phase_value, 0, 1) && storage_slot == -1) {
storage_slot = 0;
SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.");
}
@ -604,7 +604,7 @@
//
if (parser.seen('L')) { // Load Current Mesh Data
g29_storage_slot = parser.has_value() ? parser.value_int() : state.storage_slot;
g29_storage_slot = parser.has_value() ? parser.value_int() : storage_slot;
int16_t a = settings.calc_num_meshes();
@ -620,7 +620,7 @@
}
settings.load_mesh(g29_storage_slot);
state.storage_slot = g29_storage_slot;
storage_slot = g29_storage_slot;
SERIAL_PROTOCOLLNPGM("Done.");
}
@ -630,7 +630,7 @@
//
if (parser.seen('S')) { // Store (or Save) Current Mesh Data
g29_storage_slot = parser.has_value() ? parser.value_int() : state.storage_slot;
g29_storage_slot = parser.has_value() ? parser.value_int() : storage_slot;
if (g29_storage_slot == -1) { // Special case, we are going to 'Export' the mesh to the
SERIAL_ECHOLNPGM("G29 I 999"); // host in a form it can be reconstructed on a different machine
@ -662,7 +662,7 @@
}
settings.store_mesh(g29_storage_slot);
state.storage_slot = g29_storage_slot;
storage_slot = g29_storage_slot;
SERIAL_PROTOCOLLNPGM("Done.");
}
@ -1195,10 +1195,10 @@
void unified_bed_leveling::g29_what_command() {
report_state();
if (state.storage_slot == -1)
if (storage_slot == -1)
SERIAL_PROTOCOLPGM("No Mesh Loaded.");
else {
SERIAL_PROTOCOLPAIR("Mesh ", state.storage_slot);
SERIAL_PROTOCOLPAIR("Mesh ", storage_slot);
SERIAL_PROTOCOLPGM(" Loaded.");
}
SERIAL_EOL();

View File

@ -51,7 +51,7 @@ void GcodeSuite::M420() {
if (parser.seen('L')) {
#if ENABLED(EEPROM_SETTINGS)
const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.state.storage_slot;
const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.storage_slot;
const int16_t a = settings.calc_num_meshes();
if (!a) {
@ -66,7 +66,7 @@ void GcodeSuite::M420() {
}
settings.load_mesh(storage_slot);
ubl.state.storage_slot = storage_slot;
ubl.storage_slot = storage_slot;
#else
@ -80,7 +80,7 @@ void GcodeSuite::M420() {
if (parser.seen('L') || parser.seen('V')) {
ubl.display_map(0); // Currently only supports one map type
SERIAL_ECHOLNPAIR("ubl.mesh_is_valid = ", ubl.mesh_is_valid());
SERIAL_ECHOLNPAIR("ubl.state.storage_slot = ", ubl.state.storage_slot);
SERIAL_ECHOLNPAIR("ubl.storage_slot = ", ubl.storage_slot);
}
#endif // AUTO_BED_LEVELING_UBL

View File

@ -89,7 +89,7 @@
*
* AUTO_BED_LEVELING_UBL: 2 bytes
* 324 G29 A planner.leveling_active (bool)
* 325 G29 S ubl.state.storage_slot (int8_t)
* 325 G29 S ubl.storage_slot (int8_t)
*
* DELTA: 48 bytes
* 344 M666 XYZ delta_endstop_adj (float x3)
@ -411,7 +411,7 @@ void MarlinSettings::postprocess() {
#if ENABLED(AUTO_BED_LEVELING_UBL)
EEPROM_WRITE(planner.leveling_active);
EEPROM_WRITE(ubl.state.storage_slot);
EEPROM_WRITE(ubl.storage_slot);
#else
const bool ubl_active = false;
const int8_t storage_slot = -1;
@ -634,8 +634,8 @@ void MarlinSettings::postprocess() {
}
#if ENABLED(UBL_SAVE_ACTIVE_ON_M500)
if (ubl.state.storage_slot >= 0)
store_mesh(ubl.state.storage_slot);
if (ubl.storage_slot >= 0)
store_mesh(ubl.storage_slot);
#endif
EEPROM_FINISH();
return !eeprom_error;
@ -798,7 +798,7 @@ void MarlinSettings::postprocess() {
#if ENABLED(AUTO_BED_LEVELING_UBL)
EEPROM_READ(planner.leveling_active);
EEPROM_READ(ubl.state.storage_slot);
EEPROM_READ(ubl.storage_slot);
#else
uint8_t dummyui8;
EEPROM_READ(dummyb);
@ -1015,10 +1015,10 @@ void MarlinSettings::postprocess() {
ubl.reset();
}
if (ubl.state.storage_slot >= 0) {
load_mesh(ubl.state.storage_slot);
if (ubl.storage_slot >= 0) {
load_mesh(ubl.storage_slot);
#if ENABLED(EEPROM_CHITCHAT)
SERIAL_ECHOPAIR("Mesh ", ubl.state.storage_slot);
SERIAL_ECHOPAIR("Mesh ", ubl.storage_slot);
SERIAL_ECHOLNPGM(" loaded from storage.");
#endif
}
@ -1570,7 +1570,7 @@ void MarlinSettings::reset() {
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.state.storage_slot);
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
}