Move SENSITIVE_PINS to its own file

This commit is contained in:
Scott Lahteine 2018-10-11 00:58:41 -05:00
parent 45e738876a
commit 1407afad73
4 changed files with 532 additions and 124 deletions

View File

@ -259,6 +259,9 @@ void setup_powerhold() {
/**
* Sensitive pin test for M42, M226
*/
#include "pins/sensitive_pins.h"
bool pin_is_protected(const pin_t pin) {
static const pin_t sensitive_pins[] PROGMEM = SENSITIVE_PINS;
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) {

View File

@ -31,6 +31,8 @@
#include "../pins/pins.h"
#include HAL_PATH(../HAL, spi_pins.h)
#if defined(__AVR__) && !defined(USBCON)
#define HardwareSerial_h // trick to disable the standard HWserial
#endif

View File

@ -19,6 +19,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Include pins definitions
@ -32,9 +33,6 @@
* These numbers are the same in any pin mapping.
*/
#ifndef __PINS_H__
#define __PINS_H__
#define MAX_EXTRUDERS 6
#if MB(RAMPS_13_EFB) || MB(RAMPS_14_EFB) || MB(RAMPS_PLUS_EFB) || MB(RAMPS_14_RE_ARM_EFB) || MB(RAMPS_SMART_EFB) || MB(RAMPS_DUO_EFB) || MB(RAMPS4DUE_EFB)
@ -665,7 +663,8 @@
#ifndef LED_PIN
#define LED_PIN -1
#endif
#ifndef PS_ON_PIN
#if POWER_SUPPLY == 0 || !defined(PS_ON_PIN)
#undef PS_ON_PIN
#define PS_ON_PIN -1
#endif
#ifndef KILL_PIN
@ -732,94 +731,6 @@
#endif
#endif
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, E0_CS_PIN,
#define _E1_PINS
#define _E2_PINS
#define _E3_PINS
#define _E4_PINS
#define _E5_PINS
#if ENABLED(SWITCHING_EXTRUDER)
// Tools 0 and 1 use E0
#if EXTRUDERS > 2 // Tools 2 and 3 use E1
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if EXTRUDERS > 4 // Tools 4 and 5 use E2
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#endif
#endif
#elif EXTRUDERS > 1
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if EXTRUDERS > 2
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#if EXTRUDERS > 3
#undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_MS3_PIN, E3_CS_PIN,
#if EXTRUDERS > 4
#undef _E4_PINS
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_MS3_PIN, E4_CS_PIN,
#if EXTRUDERS > 5
#undef _E5_PINS
#define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, E5_MS1_PIN, E5_MS2_PIN, E5_MS3_PIN, E5_CS_PIN,
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_0_PIN),
#define _H1_PINS
#define _H2_PINS
#define _H3_PINS
#define _H4_PINS
#define _H5_PINS
#if HOTENDS > 1
#undef _H1_PINS
#define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_1_PIN),
#if HOTENDS > 2
#undef _H2_PINS
#define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_2_PIN),
#if HOTENDS > 3
#undef _H3_PINS
#define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4
#undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, E4_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_4_PIN),
#if HOTENDS > 5
#undef _H5_PINS
#define _H5_PINS HEATER_5_PIN, E5_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_5_PIN),
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#elif ENABLED(MIXING_EXTRUDER)
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if MIXING_STEPPERS > 2
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#if MIXING_STEPPERS > 3
#undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_CS_PIN,
#if MIXING_STEPPERS > 4
#undef _E4_PINS
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_CS_PIN,
#if MIXING_STEPPERS > 5
#undef _E5_PINS
#define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, E5_MS1_PIN, E5_MS2_PIN, E5_CS_PIN,
#endif // MIXING_STEPPERS > 5
#endif // MIXING_STEPPERS > 4
#endif // MIXING_STEPPERS > 3
#endif // MIXING_STEPPERS > 2
#endif // MIXING_STEPPERS > 1
#define BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN),
//
// Assign endstop pins for boards with only 3 connectors
//
@ -856,7 +767,7 @@
//
// Disable unused endstop / probe pins
//
#if DISABLED(Z_MIN_PROBE_ENDSTOP)
#if !HAS_BED_PROBE || DISABLED(Z_MIN_PROBE_ENDSTOP)
#undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN -1
#endif
@ -904,14 +815,13 @@
#define LCD_PINS_D7 -1
#endif
//
// Dual X-carriage, Dual Y, Dual Z support
//
#define _X2_PINS
#define _Y2_PINS
#define _Z2_PINS
#define _Z3_PINS
/**
* Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers
*
* By default X2 is assigned to the next open E plug
* on the board, then in order, Y2, Z2, Z3. These can be
* overridden in Configuration.h or Configuration_adv.h.
*/
#define __EPIN(p,q) E##p##_##q##_PIN
#define _EPIN(p,q) __EPIN(p,q)
@ -1019,26 +929,3 @@
#define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3)
#endif
#endif
#ifndef HAL_SENSITIVE_PINS
#define HAL_SENSITIVE_PINS
#endif
#define SENSITIVE_PINS { \
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, X_MS1_PIN, X_MS2_PIN, X_CS_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Y_MS1_PIN, Y_MS2_PIN, Y_CS_PIN, \
Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MS1_PIN, Z_MS2_PIN, Z_MS3_PIN, Z_CS_PIN, Z_MIN_PROBE_PIN, \
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS \
_X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS \
HAL_SENSITIVE_PINS \
}
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
// Note: default SPI pins are defined in the HAL
#include HAL_PATH(../HAL, spi_pins.h)
#endif // __PINS_H__

View File

@ -0,0 +1,516 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
//
// Prepare a list of protected pins for M42/M43
//
#if PIN_EXISTS(X_MIN)
#define _X_MIN X_MIN_PIN,
#else
#define _X_MIN
#endif
#if PIN_EXISTS(X_MAX)
#define _X_MAX X_MAX_PIN,
#else
#define _X_MAX
#endif
#if PIN_EXISTS(X_CS)
#define _X_CS X_CS_PIN,
#else
#define _X_CS
#endif
#if PIN_EXISTS(X_MS1)
#define _X_MS1 X_MS1_PIN,
#else
#define _X_MS1
#endif
#if PIN_EXISTS(X_MS2)
#define _X_MS2 X_MS2_PIN,
#else
#define _X_MS2
#endif
#if PIN_EXISTS(X_MS3)
#define _X_MS3 X_MS3_PIN,
#else
#define _X_MS3
#endif
#define _X_PINS X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, _X_MIN _X_MAX _X_MS1 _X_MS2 _X_MS3 _X_CS
#if PIN_EXISTS(Y_MIN)
#define _Y_MIN Y_MIN_PIN,
#else
#define _Y_MIN
#endif
#if PIN_EXISTS(Y_MAX)
#define _Y_MAX Y_MAX_PIN,
#else
#define _Y_MAX
#endif
#if PIN_EXISTS(Y_CS)
#define _Y_CS Y_CS_PIN,
#else
#define _Y_CS
#endif
#if PIN_EXISTS(Y_MS1)
#define _Y_MS1 Y_MS1_PIN,
#else
#define _Y_MS1
#endif
#if PIN_EXISTS(Y_MS2)
#define _Y_MS2 Y_MS2_PIN,
#else
#define _Y_MS2
#endif
#if PIN_EXISTS(Y_MS3)
#define _Y_MS3 Y_MS3_PIN,
#else
#define _Y_MS3
#endif
#define _Y_PINS Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, _Y_MIN _Y_MAX _Y_MS1 _Y_MS2 _Y_MS3 _Y_CS
#if PIN_EXISTS(Z_MIN)
#define _Z_MIN Z_MIN_PIN,
#else
#define _Z_MIN
#endif
#if PIN_EXISTS(Z_MAX)
#define _Z_MAX Z_MAX_PIN,
#else
#define _Z_MAX
#endif
#if PIN_EXISTS(Z_CS)
#define _Z_CS Z_CS_PIN,
#else
#define _Z_CS
#endif
#if PIN_EXISTS(Z_MS1)
#define _Z_MS1 Z_MS1_PIN,
#else
#define _Z_MS1
#endif
#if PIN_EXISTS(Z_MS2)
#define _Z_MS2 Z_MS2_PIN,
#else
#define _Z_MS2
#endif
#if PIN_EXISTS(Z_MS3)
#define _Z_MS3 Z_MS3_PIN,
#else
#define _Z_MS3
#endif
#define _Z_PINS Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, _Z_MIN _Z_MAX _Z_MS1 _Z_MS2 _Z_MS3 _Z_CS
//
// Extruder Chip Select, Digital Micro-steps
//
// Mixing stepper, Switching stepper, or regular stepper
#define E_NEEDED(N) (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > N) \
|| (ENABLED(SWITCHING_EXTRUDER) && E_STEPPERS > N) \
|| (DISABLED(SWITCHING_EXTRUDER) && DISABLED(MIXING_EXTRUDER) && EXTRUDERS > N)
#if PIN_EXISTS(E0_CS)
#define _E0_CS E0_CS_PIN,
#else
#define _E0_CS
#endif
#if PIN_EXISTS(E0_MS1)
#define _E0_MS1 E0_MS1_PIN,
#else
#define _E0_MS1
#endif
#if PIN_EXISTS(E0_MS2)
#define _E0_MS2 E0_MS2_PIN,
#else
#define _E0_MS2
#endif
#if PIN_EXISTS(E0_MS3)
#define _E0_MS3 E0_MS3_PIN,
#else
#define _E0_MS3
#endif
#define _E1_CS
#define _E1_MS1
#define _E1_MS2
#define _E1_MS3
#if E_NEEDED(1)
#if PIN_EXISTS(E1_CS)
#undef _E1_CS
#define _E1_CS E1_CS_PIN,
#endif
#if PIN_EXISTS(E1_MS1)
#undef _E1_MS1
#define _E1_MS1 E1_MS1_PIN,
#endif
#if PIN_EXISTS(E1_MS2)
#undef _E1_MS2
#define _E1_MS2 E1_MS2_PIN,
#endif
#if PIN_EXISTS(E1_MS3)
#undef _E1_MS3
#define _E1_MS3 E1_MS3_PIN,
#endif
#endif
#define _E2_CS
#define _E2_MS1
#define _E2_MS2
#define _E2_MS3
#if E_NEEDED(2)
#if PIN_EXISTS(E2_CS)
#undef _E2_CS
#define _E2_CS E2_CS_PIN,
#endif
#if PIN_EXISTS(E2_MS1)
#undef _E2_MS1
#define _E2_MS1 E2_MS1_PIN,
#endif
#if PIN_EXISTS(E2_MS2)
#undef _E2_MS2
#define _E2_MS2 E2_MS2_PIN,
#endif
#if PIN_EXISTS(E2_MS3)
#undef _E2_MS3
#define _E2_MS3 E2_MS3_PIN,
#endif
#endif
#define _E3_CS
#define _E3_MS1
#define _E3_MS2
#define _E3_MS3
#if E_NEEDED(3)
#if PIN_EXISTS(E3_CS)
#undef _E3_CS
#define _E3_CS E3_CS_PIN,
#endif
#if PIN_EXISTS(E3_MS1)
#undef _E3_MS1
#define _E3_MS1 E3_MS1_PIN,
#endif
#if PIN_EXISTS(E3_MS2)
#undef _E3_MS2
#define _E3_MS2 E3_MS2_PIN,
#endif
#if PIN_EXISTS(E3_MS3)
#undef _E3_MS3
#define _E3_MS3 E3_MS3_PIN,
#endif
#endif
#define _E4_CS
#define _E4_MS1
#define _E4_MS2
#define _E4_MS3
#if E_NEEDED(4)
#if PIN_EXISTS(E4_CS)
#undef _E4_CS
#define _E4_CS E4_CS_PIN,
#endif
#if PIN_EXISTS(E4_MS1)
#undef _E4_MS1
#define _E4_MS1 E4_MS1_PIN,
#endif
#if PIN_EXISTS(E4_MS2)
#undef _E4_MS2
#define _E4_MS2 E4_MS2_PIN,
#endif
#if PIN_EXISTS(E4_MS3)
#undef _E4_MS3
#define _E4_MS3 E4_MS3_PIN,
#endif
#endif
#define _E5_CS
#define _E5_MS1
#define _E5_MS2
#define _E5_MS3
#if E_NEEDED(5)
#if PIN_EXISTS(E5_CS)
#undef _E5_CS
#define _E5_CS E5_CS_PIN,
#endif
#if PIN_EXISTS(E5_MS1)
#undef _E5_MS1
#define _E5_MS1 E5_MS1_PIN,
#endif
#if PIN_EXISTS(E5_MS2)
#undef _E5_MS2
#define _E5_MS2 E5_MS2_PIN,
#endif
#if PIN_EXISTS(E5_MS3)
#undef _E5_MS3
#define _E5_MS3 E5_MS3_PIN,
#endif
#endif
//
// E Steppers
//
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, _E0_CS _E0_MS1 _E0_MS2 _E0_MS3
#define _E1_PINS
#define _E2_PINS
#define _E3_PINS
#define _E4_PINS
#define _E5_PINS
#if ENABLED(SWITCHING_EXTRUDER)
// Tools 0 and 1 use E0
#if EXTRUDERS > 2 // Tools 2 and 3 use E1
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3
#if EXTRUDERS > 4 // Tools 4 and 5 use E2
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3
#endif
#endif
#elif EXTRUDERS > 1 || ENABLED(MIXING_EXTRUDER)
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3
#if EXTRUDERS > 2 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 2)
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3
#if EXTRUDERS > 3 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 3)
#undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, _E3_CS _E3_MS1 _E3_MS2 _E3_MS3
#if EXTRUDERS > 4 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 4)
#undef _E4_PINS
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, _E4_CS _E4_MS1 _E4_MS2 _E4_MS3
#if EXTRUDERS > 5 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 5)
#undef _E5_PINS
#define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, _E5_CS _E5_MS1 _E5_MS2 _E5_MS3
#endif // EXTRUDERS > 5 || MIXING_EXTRUDER > 5
#endif // EXTRUDERS > 4 || MIXING_EXTRUDER > 4
#endif // EXTRUDERS > 3 || MIXING_EXTRUDER > 3
#endif // EXTRUDERS > 2 || MIXING_EXTRUDER > 2
#endif // EXTRUDERS > 1 || MIXING_EXTRUDER
//
// Heaters, Fans, Temp Sensors
//
#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_0_PIN),
#define _H1_PINS
#define _H2_PINS
#define _H3_PINS
#define _H4_PINS
#define _H5_PINS
#if HOTENDS > 1
#undef _H1_PINS
#define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_1_PIN),
#if HOTENDS > 2
#undef _H2_PINS
#define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_2_PIN),
#if HOTENDS > 3
#undef _H3_PINS
#define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4
#undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, E4_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_4_PIN),
#if HOTENDS > 5
#undef _H5_PINS
#define _H5_PINS HEATER_5_PIN, E5_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_5_PIN),
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#define _BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN),
//
// Dual X, Dual Y, Multi-Z
// Chip Select and Digital Micro-stepping
//
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)
#if PIN_EXISTS(X2_CS)
#define _X2_CS X2_CS_PIN,
#else
#define _X2_CS
#endif
#if PIN_EXISTS(X2_MS1)
#define _X2_MS1 X2_MS1_PIN,
#else
#define _X2_MS1
#endif
#if PIN_EXISTS(X2_MS2)
#define _X2_MS2 X2_MS2_PIN,
#else
#define _X2_MS2
#endif
#if PIN_EXISTS(X2_MS3)
#define _X2_MS3 X2_MS3_PIN,
#else
#define _X2_MS3
#endif
#define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, _X2_CS _X2_MS1 _X2_MS2 _X2_MS3
#else
#define _X2_PINS
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#if PIN_EXISTS(Y2_CS)
#define _Y2_CS Y2_CS_PIN,
#else
#define _Y2_CS
#endif
#if PIN_EXISTS(Y2_MS1)
#define _Y2_MS1 Y2_MS1_PIN,
#else
#define _Y2_MS1
#endif
#if PIN_EXISTS(Y2_MS2)
#define _Y2_MS2 Y2_MS2_PIN,
#else
#define _Y2_MS2
#endif
#if PIN_EXISTS(Y2_MS3)
#define _Y2_MS3 Y2_MS3_PIN,
#else
#define _Y2_MS3
#endif
#define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, _Y2_CS _Y2_MS1 _Y2_MS2 _Y2_MS3
#else
#define _Y2_PINS
#endif
#if Z_MULTI_STEPPER_DRIVERS
#if PIN_EXISTS(Z2_CS)
#define _Z2_CS Z2_CS_PIN,
#else
#define _Z2_CS
#endif
#if PIN_EXISTS(Z2_MS1)
#define _Z2_MS1 Z2_MS1_PIN,
#else
#define _Z2_MS1
#endif
#if PIN_EXISTS(Z2_MS2)
#define _Z2_MS2 Z2_MS2_PIN,
#else
#define _Z2_MS2
#endif
#if PIN_EXISTS(Z2_MS3)
#define _Z2_MS3 Z2_MS3_PIN,
#else
#define _Z2_MS3
#endif
#define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, _Z2_CS _Z2_MS1 _Z2_MS2 _Z2_MS3
#else
#define _Z2_PINS
#endif
#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
#if PIN_EXISTS(Z3_CS)
#define _Z3_CS Z3_CS_PIN,
#else
#define _Z3_CS
#endif
#if PIN_EXISTS(Z3_MS1)
#define _Z3_MS1 Z3_MS1_PIN,
#else
#define _Z3_MS1
#endif
#if PIN_EXISTS(Z3_MS2)
#define _Z3_MS2 Z3_MS2_PIN,
#else
#define _Z3_MS2
#endif
#if PIN_EXISTS(Z3_MS3)
#define _Z3_MS3 Z3_MS3_PIN,
#else
#define _Z3_MS3
#endif
#define _Z3_PINS Z3_STEP_PIN, Z3_DIR_PIN, Z3_ENABLE_PIN, _Z3_CS _Z3_MS1 _Z3_MS2 _Z3_MS3
#else
#define _Z3_PINS
#endif
//
// Generate the final Sensitive Pins array,
// keeping the array as small as possible.
//
#if PIN_EXISTS(PS_ON)
#define _PS_ON PS_ON_PIN,
#else
#define _PS_ON
#endif
#if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
#define _Z_PROBE Z_MIN_PROBE_PIN,
#else
#define _Z_PROBE
#endif
#if TEMP_SENSOR_BED && PIN_EXISTS(HEATER_BED)
#define _HEATER_BED HEATER_BED_PIN,
#else
#define _HEATER_BED
#endif
#if PIN_EXISTS(FAN)
#define _FAN0 FAN_PIN,
#else
#define _FAN0
#endif
#if PIN_EXISTS(FAN1)
#define _FAN1 FAN1_PIN,
#else
#define _FAN1
#endif
#if PIN_EXISTS(FAN2)
#define _FAN2 FAN2_PIN,
#else
#define _FAN2
#endif
#if PIN_EXISTS(CONTROLLER_FAN)
#define _FANC CONTROLLER_FAN_PIN,
#else
#define _FANC
#endif
#ifndef HAL_SENSITIVE_PINS
#define HAL_SENSITIVE_PINS
#endif
#define SENSITIVE_PINS { \
_X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z_PROBE \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS \
_PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FANC \
HAL_SENSITIVE_PINS \
}