From efc198f952a54323dbcb4d0c480d6fa9a64edb9b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2017 17:41:38 -0500 Subject: [PATCH 01/16] Spacing, const, comments --- Marlin/Conditionals_LCD.h | 2 +- Marlin/Configuration_adv.h | 12 ++--- Marlin/Marlin_main.cpp | 88 ++++++++++++---------------------- Marlin/buzzer.h | 2 +- Marlin/configuration_store.cpp | 8 ++-- Marlin/temperature.cpp | 2 +- Marlin/ultralcd_impl_HD44780.h | 63 ++++++++++++------------ 7 files changed, 73 insertions(+), 104 deletions(-) diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h index 3c39512a93..b33499e6bf 100644 --- a/Marlin/Conditionals_LCD.h +++ b/Marlin/Conditionals_LCD.h @@ -243,7 +243,7 @@ /* Custom characters defined in the first 8 characters of the LCD */ #define LCD_BEDTEMP_CHAR 0x00 // Print only as a char. This will have 'unexpected' results when used in a string! #define LCD_DEGREE_CHAR 0x01 - #define LCD_STR_THERMOMETER "\x02" // Too many places use preprocessor string concatination to change this to a char right now. + #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation #define LCD_UPLEVEL_CHAR 0x03 #define LCD_REFRESH_CHAR 0x04 #define LCD_STR_FOLDER "\x05" diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 2665bddb6f..0db274d13b 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -225,13 +225,11 @@ */ //#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board - // pins_XXX.h file overrides this one - #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0 - #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM - // and if CASE_LIGHT_DEFAULT is set to on - //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu #endif //=========================================================================== diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 1717026b3f..c4866d89a5 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -458,7 +458,7 @@ volatile bool wait_for_heatup = true; volatile bool wait_for_user = false; #endif -const char axis_codes[XYZE] = {'X', 'Y', 'Z', 'E'}; +const char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' }; // Number of characters read in the current line of serial input static int serial_count = 0; @@ -1394,7 +1394,7 @@ bool get_target_extruder_from_command(int code) { * * Callers must sync the planner position after calling this! */ -static void set_axis_is_at_home(AxisEnum axis) { +static void set_axis_is_at_home(const AxisEnum axis) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]); @@ -1496,7 +1496,7 @@ static void set_axis_is_at_home(AxisEnum axis) { /** * Some planner shorthand inline functions */ -inline float get_homing_bump_feedrate(AxisEnum axis) { +inline float get_homing_bump_feedrate(const AxisEnum axis) { int constexpr homing_bump_divisor[] = HOMING_BUMP_DIVISOR; int hbd = homing_bump_divisor[axis]; if (hbd < 1) { @@ -1507,20 +1507,19 @@ inline float get_homing_bump_feedrate(AxisEnum axis) { return homing_feedrate_mm_s[axis] / hbd; } -// -// line_to_current_position -// Move the planner to the current position from wherever it last moved -// (or from wherever it has been told it is located). -// +/** + * Move the planner to the current position from wherever it last moved + * (or from wherever it has been told it is located). + */ inline void line_to_current_position() { planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, active_extruder); } -// -// line_to_destination -// Move the planner, not necessarily synced with current_position -// -inline void line_to_destination(float fr_mm_s) { +/** + * Move the planner to the position stored in the destination array, which is + * used by G0/G1/G2/G3/G5 and many other functions to set a destination. + */ +inline void line_to_destination(const float fr_mm_s) { planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], fr_mm_s, active_extruder); } inline void line_to_destination() { line_to_destination(feedrate_mm_s); } @@ -2751,7 +2750,7 @@ static void clean_up_after_endstop_or_probe_move() { /** * Home an individual linear axis */ -static void do_homing_move(const AxisEnum axis, float distance, float fr_mm_s=0.0) { +static void do_homing_move(const AxisEnum axis, const float distance, const float fr_mm_s=0.0) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { @@ -4907,7 +4906,7 @@ void home_all_axes() { gcode_G28(true); } if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) ) { - float simple_z = current_position[Z_AXIS] - measured_z; + const float simple_z = current_position[Z_AXIS] - measured_z; #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPAIR("Z from Probe:", simple_z); @@ -7667,45 +7666,32 @@ void report_current_position() { #ifdef M114_DETAIL - static const char axis_char[XYZE] = {'X','Y','Z','E'}; - - void report_xyze(const float pos[XYZE], uint8_t n = 4, uint8_t precision = 3) { + void report_xyze(const float pos[XYZE], const uint8_t n = 4, const uint8_t precision = 3) { char str[12]; - for(uint8_t i=0; itick(); thermalManager.manage_heater(); diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index f1c1b82e2b..d9d71ce4b4 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -457,10 +457,10 @@ void MarlinSettings::postprocess() { #endif #if DISABLED(ULTIPANEL) - const int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, - lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, - lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; - #endif // !ULTIPANEL + constexpr int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, + lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, + lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; + #endif EEPROM_WRITE(lcd_preheat_hotend_temp); EEPROM_WRITE(lcd_preheat_bed_temp); diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 40df64b67a..ea3a9a91f2 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -52,7 +52,7 @@ #endif #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) - static void* heater_ttbl_map[2] = {(void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE }; + static void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE }; static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN }; #else static void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS((void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE, (void*)HEATER_2_TEMPTABLE, (void*)HEATER_3_TEMPTABLE, (void*)HEATER_4_TEMPTABLE); diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index d1ddd3ba1b..ed7d630b47 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -193,18 +193,19 @@ extern volatile uint8_t buttons; //an extended version of the last checked butt static void lcd_implementation_update_indicators(); #endif - -static void createChar_P(char c, PROGMEM byte *ptr) { +static void createChar_P(const char c, const byte * const ptr) { byte temp[8]; - int8_t i; - - for(i=0; i<8; i++) { + for (uint8_t i = 0; i < 8; i++) temp[i] = pgm_read_byte(&ptr[i]); - } lcd.createChar(c, temp); } -const static PROGMEM byte bedTemp[8] = { +static void lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) + const bool info_screen_charset = true + #endif +) { + const static PROGMEM byte bedTemp[8] = { B00000, B11111, B10101, @@ -213,9 +214,9 @@ const static PROGMEM byte bedTemp[8] = { B11111, B00000, B00000 -}; + }; -const static PROGMEM byte degree[8] = { + const static PROGMEM byte degree[8] = { B01100, B10010, B10010, @@ -226,7 +227,7 @@ const static PROGMEM byte degree[8] = { B00000 }; -const static PROGMEM byte thermometer[8] = { + const static PROGMEM byte thermometer[8] = { B00100, B01010, B01010, @@ -237,7 +238,7 @@ const static PROGMEM byte thermometer[8] = { B01110 }; -const static PROGMEM byte uplevel[8] = { + const static PROGMEM byte uplevel[8] = { B00100, B01110, B11111, @@ -246,9 +247,9 @@ const static PROGMEM byte uplevel[8] = { B00000, B00000, B00000 -}; + }; -const static PROGMEM byte feedrate[8] = { + const static PROGMEM byte feedrate[8] = { B11100, B10000, B11000, @@ -257,9 +258,9 @@ const static PROGMEM byte feedrate[8] = { B00110, B00101, B00000 -}; + }; -const static PROGMEM byte clock[8] = { + const static PROGMEM byte clock[8] = { B00000, B01110, B10011, @@ -268,10 +269,10 @@ const static PROGMEM byte clock[8] = { B01110, B00000, B00000 -}; + }; -#if ENABLED(SDSUPPORT) - const static PROGMEM byte refresh[8] = { + #if ENABLED(SDSUPPORT) + const static PROGMEM byte refresh[8] = { B00000, B00110, B11001, @@ -280,8 +281,8 @@ const static PROGMEM byte clock[8] = { B10011, B01100, B00000, - }; - const static PROGMEM byte folder[8] = { + }; + const static PROGMEM byte folder[8] = { B00000, B11100, B11111, @@ -290,10 +291,10 @@ const static PROGMEM byte clock[8] = { B11111, B00000, B00000 - }; + }; - #if ENABLED(LCD_PROGRESS_BAR) - const static PROGMEM byte progress[3][8] = { { + #if ENABLED(LCD_PROGRESS_BAR) + const static PROGMEM byte progress[3][8] = { { B00000, B10000, B10000, @@ -321,14 +322,8 @@ const static PROGMEM byte clock[8] = { B10101, B00000 } }; + #endif #endif -#endif - -static void lcd_set_custom_characters( - #if ENABLED(LCD_PROGRESS_BAR) - const bool info_screen_charset = true - #endif -) { createChar_P(LCD_BEDTEMP_CHAR, bedTemp); createChar_P(LCD_DEGREE_CHAR, degree); @@ -638,10 +633,12 @@ FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, co #if ENABLED(LCD_PROGRESS_BAR) inline void lcd_draw_progress_bar(const uint8_t percent) { - int tix = (int)(percent * (LCD_WIDTH) * 3) / 100, - cel = tix / 3, rem = tix % 3, i = LCD_WIDTH; + const int tix = (int)(percent * (LCD_WIDTH) * 3) / 100, + cel = tix / 3, + rem = tix % 3; + uint8_t i = LCD_WIDTH; char msg[LCD_WIDTH + 1], b = ' '; - msg[i] = '\0'; + msg[LCD_WIDTH] = '\0'; while (i--) { if (i == cel - 1) b = LCD_STR_PROGRESS[2]; From e1c5a43247956688ed66043d5a405a4da5781aa1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 04:32:31 -0500 Subject: [PATCH 02/16] Cleanup stepper current control config options --- Marlin/Configuration_adv.h | 10 +++++----- .../Cartesio/Configuration_adv.h | 10 +++++----- .../example_configurations/Felix/Configuration_adv.h | 10 +++++----- .../FolgerTech-i3-2020/Configuration_adv.h | 10 +++++----- .../Hephestos/Configuration_adv.h | 10 +++++----- .../Hephestos_2/Configuration_adv.h | 11 +++++------ .../example_configurations/K8200/Configuration_adv.h | 10 +++++----- .../example_configurations/K8400/Configuration_adv.h | 10 +++++----- .../example_configurations/M150/Configuration_adv.h | 10 +++++----- .../RigidBot/Configuration_adv.h | 10 +++++----- .../example_configurations/SCARA/Configuration_adv.h | 10 +++++----- .../example_configurations/TAZ4/Configuration_adv.h | 10 +++++----- .../TinyBoy2/Configuration_adv.h | 10 +++++----- .../example_configurations/WITBOX/Configuration_adv.h | 10 +++++----- .../delta/FLSUN/auto_calibrate/Configuration_adv.h | 10 +++++----- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 10 +++++----- .../delta/generic/Configuration_adv.h | 10 +++++----- .../delta/kossel_mini/Configuration_adv.h | 10 +++++----- .../delta/kossel_pro/Configuration_adv.h | 10 +++++----- .../delta/kossel_xl/Configuration_adv.h | 10 +++++----- .../gCreate_gMax1.5+/Configuration_adv.h | 10 +++++----- .../makibox/Configuration_adv.h | 8 ++++---- .../tvrrug/Round2/Configuration_adv.h | 10 +++++----- .../example_configurations/wt150/Configuration_adv.h | 8 ++++---- Marlin/pins.h | 6 +++--- 25 files changed, 121 insertions(+), 122 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0db274d13b..0810194b20 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 42183ac74d..844c8468f1 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 28368b4280..1889d6883f 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h index 5cee9c6a71..e365927d3f 100644 --- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 52da5bfb49..20b20b6d23 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h index 144f2e829f..0ea3be30f6 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h @@ -419,17 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT {150, 170, 180, 190, 180} // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A]) - -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 150, 170, 180, 190, 180 } // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A]) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 894cc2c0b4..0b72300d89 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -432,16 +432,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h index 0a6208ab4c..f1d4c78477 100644 --- a/Marlin/example_configurations/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/K8400/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/M150/Configuration_adv.h b/Marlin/example_configurations/M150/Configuration_adv.h index 5c46854c28..adcee6867e 100644 --- a/Marlin/example_configurations/M150/Configuration_adv.h +++ b/Marlin/example_configurations/M150/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index f973a648a7..1be574fce2 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index d3fab11d2e..3f31e9d944 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index 72a6b1d8bc..75988b6149 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index b6e6175fb8..ba0eae98a7 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 52da5bfb49..20b20b6d23 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 7782959a89..80c2d36c6a 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -421,16 +421,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 392cde7c6b..8930283f6c 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -421,16 +421,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 7565ac8652..c3df2ecccc 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -421,16 +421,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 7565ac8652..c3df2ecccc 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -421,16 +421,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index d15fcff5bf..2d811234f1 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -426,16 +426,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 173d6f986e..5639207b23 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -421,16 +421,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h index 11857e0759..0b6ae047d6 100644 --- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 31e2d891fe..d36902e802 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -419,13 +419,13 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 6e0ce6e9e0..3314a56cfa 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -419,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C -//#define DIGIPOT_MCP4018 +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index b8dee77729..48454db668 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -419,13 +419,13 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro #define DIGIPOT_I2C -#define DIGIPOT_MCP4018 +#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS #define DIGIPOT_I2C_MOTOR_CURRENTS {0.68, 0.68, 1.18, 1.27, 1.27} diff --git a/Marlin/pins.h b/Marlin/pins.h index 703df17427..e4c5e4f5e1 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -20,8 +20,8 @@ * */ -#ifndef PINS_H -#define PINS_H +#ifndef __PINS_H__ +#define __PINS_H__ #if MB(GEN7_CUSTOM) #include "pins_GEN7_CUSTOM.h" @@ -570,4 +570,4 @@ #define SS_PIN AVR_SS_PIN #endif -#endif // __PINS_H +#endif // __PINS_H__ From 45c74406cf8eb4a294c1c2690aa50706cdf1b784 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2017 17:45:28 -0500 Subject: [PATCH 03/16] Recover 32 bytes of SRAM in Marlin bootscreen code --- Marlin/ultralcd_impl_HD44780.h | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index ed7d630b47..e281cacaac 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -440,7 +440,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { } void bootscreen() { - byte top_left[8] = { + const static PROGMEM byte corner[4][8] = { { B00000, B00000, B00000, @@ -449,8 +449,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { B00010, B00100, B00100 - }; - byte top_right[8] = { + }, { B00000, B00000, B00000, @@ -459,8 +458,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { B01100, B00100, B00100 - }; - byte botom_left[8] = { + }, { B00100, B00010, B00001, @@ -469,8 +467,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { B00000, B00000, B00000 - }; - byte botom_right[8] = { + }, { B00100, B01000, B10000, @@ -479,11 +476,9 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { B00000, B00000, B00000 - }; - lcd.createChar(0, top_left); - lcd.createChar(1, top_right); - lcd.createChar(2, botom_left); - lcd.createChar(3, botom_right); + } }; + for (uint8_t i = 0; i < 4; i++) + createChar_P(i, corner[i]); lcd.clear(); From 97e13a30ba1aff0af84f7847f27bd5c05eeb7b5f Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2017 18:32:14 -0500 Subject: [PATCH 04/16] Save over 100 bytes SRAM in pin_is_protected --- Marlin/Marlin_main.cpp | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index c4866d89a5..5315772cdb 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -660,8 +660,8 @@ static bool send_ok[BUFSIZE]; #define host_keepalive() NOOP #endif -static inline float pgm_read_any(const float *p) { return pgm_read_float_near(p); } -static inline signed char pgm_read_any(const signed char *p) { return pgm_read_byte_near(p); } +FORCE_INLINE float pgm_read_any(const float *p) { return pgm_read_float_near(p); } +FORCE_INLINE signed char pgm_read_any(const signed char *p) { return pgm_read_byte_near(p); } #define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \ static const PROGMEM type array##_P[XYZ] = { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \ @@ -6270,10 +6270,10 @@ inline void gcode_M31() { /** * Sensitive pin test for M42, M226 */ -static bool pin_is_protected(uint8_t pin) { - static const int sensitive_pins[] = SENSITIVE_PINS; +static bool pin_is_protected(const int8_t pin) { + static const int8_t sensitive_pins[] PROGMEM = SENSITIVE_PINS; for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) - if (sensitive_pins[i] == pin) return true; + if (pin == (int8_t)pgm_read_byte(&sensitive_pins[i])) return true; return false; } From e6d10f6ddd51dd8e7296c39aa576bd8b26eb1423 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2017 18:49:16 -0500 Subject: [PATCH 05/16] Spend 48b PROGMEM to save 16b SRAM ...by moving `homing_feedrate_mm_s` to PROGMEM. --- Marlin/Marlin_main.cpp | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 5315772cdb..73990e71e5 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -389,7 +389,7 @@ static const char *injected_commands_P = NULL; * Feed rates are often configured with mm/m * but the planner and stepper like mm/s units. */ -float constexpr homing_feedrate_mm_s[] = { +static const float homing_feedrate_mm_s[] PROGMEM = { #if ENABLED(DELTA) MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), #else @@ -397,6 +397,8 @@ float constexpr homing_feedrate_mm_s[] = { #endif MMM_TO_MMS(HOMING_FEEDRATE_Z), 0 }; +FORCE_INLINE float homing_feedrate(const AxisEnum a) { return pgm_read_float(&homing_feedrate_mm_s[a]); } + float feedrate_mm_s = MMM_TO_MMS(1500.0); static float saved_feedrate_mm_s; int feedrate_percentage = 100, saved_feedrate_percentage, @@ -1504,7 +1506,7 @@ inline float get_homing_bump_feedrate(const AxisEnum axis) { SERIAL_ECHO_START; SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1"); } - return homing_feedrate_mm_s[axis] / hbd; + return homing_feedrate(axis) / hbd; } /** @@ -1631,7 +1633,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f // If Z needs to raise, do it before moving XY if (destination[Z_AXIS] < z) { destination[Z_AXIS] = z; - prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]); + prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS)); } destination[X_AXIS] = x; @@ -1641,14 +1643,14 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f // If Z needs to lower, do it after moving XY if (destination[Z_AXIS] > z) { destination[Z_AXIS] = z; - prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]); + prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS)); } #else // If Z needs to raise, do it before moving XY if (current_position[Z_AXIS] < z) { - feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]; + feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS); current_position[Z_AXIS] = z; line_to_current_position(); } @@ -1660,7 +1662,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f // If Z needs to lower, do it after moving XY if (current_position[Z_AXIS] > z) { - feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]; + feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS); current_position[Z_AXIS] = z; line_to_current_position(); } @@ -2778,11 +2780,11 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa SYNC_PLAN_POSITION_KINEMATIC(); current_position[axis] = distance; inverse_kinematics(current_position); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder); + planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); #else sync_plan_position(); current_position[axis] = distance; - planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder); + planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); #endif stepper.synchronize(); @@ -3397,7 +3399,7 @@ inline void gcode_G4() { const float mlx = max_length(X_AXIS), mly = max_length(Y_AXIS), mlratio = mlx > mly ? mly / mlx : mlx / mly, - fr_mm_s = min(homing_feedrate_mm_s[X_AXIS], homing_feedrate_mm_s[Y_AXIS]) * sqrt(sq(mlratio) + 1.0); + fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * sqrt(sq(mlratio) + 1.0); do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); endstops.hit_on_purpose(); // clear endstop hit flags @@ -3540,7 +3542,7 @@ inline void gcode_G4() { // Move all carriages together linearly until an endstop is hit. current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10); - feedrate_mm_s = homing_feedrate_mm_s[X_AXIS]; + feedrate_mm_s = homing_feedrate(X_AXIS); line_to_current_position(); stepper.synchronize(); endstops.hit_on_purpose(); // clear endstop hit flags @@ -3853,7 +3855,7 @@ void home_all_axes() { gcode_G28(true); } const float old_feedrate_mm_s = feedrate_mm_s; #if MANUAL_PROBE_HEIGHT > 0 - feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS]; + feedrate_mm_s = homing_feedrate(Z_AXIS); current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; line_to_current_position(); #endif @@ -3864,7 +3866,7 @@ void home_all_axes() { gcode_G28(true); } line_to_current_position(); #if MANUAL_PROBE_HEIGHT > 0 - feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS]; + feedrate_mm_s = homing_feedrate(Z_AXIS); current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); // just slightly over the bed line_to_current_position(); #endif @@ -3900,7 +3902,7 @@ void home_all_axes() { gcode_G28(true); } #if ENABLED(MESH_G28_REST_ORIGIN) current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); set_destination_to_current(); - line_to_destination(homing_feedrate_mm_s[Z_AXIS]); + line_to_destination(homing_feedrate(Z_AXIS)); stepper.synchronize(); #endif } @@ -5502,7 +5504,7 @@ void home_all_axes() { gcode_G28(true); } // If any axis has enough movement, do the move LOOP_XYZ(i) if (fabs(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) { - if (!parser.seen('F')) feedrate_mm_s = homing_feedrate_mm_s[i]; + if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i); // If G38.2 fails throw an error if (!G38_run_probe() && is_38_2) { SERIAL_ERROR_START; From 2a41f0ff84a7f8afe4942997e980cc73ba3e0339 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 02:30:39 -0500 Subject: [PATCH 06/16] Save 28b PROGMEM in ultralcd.cpp (line_to_current) --- Marlin/ultralcd.cpp | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 1512cd893b..7f2c80e11b 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -686,8 +686,13 @@ void kill_screen(const char* lcd_msg) { else lcd_buzz(20, 440); } - inline void line_to_current(AxisEnum axis) { - planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[axis]), active_extruder); + inline void line_to_current_z() { + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[Z_AXIS]), active_extruder); + } + + inline void line_to_z(const float &z) { + current_position[Z_AXIS] = z; + line_to_current_z(); } #if ENABLED(SDSUPPORT) @@ -1521,8 +1526,7 @@ void kill_screen(const char* lcd_msg) { // void _lcd_after_probing() { #if MANUAL_PROBE_HEIGHT > 0 - current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; - line_to_current(Z_AXIS); + line_to_z(LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT); #endif // Display "Done" screen and wait for moves to complete #if MANUAL_PROBE_HEIGHT > 0 || ENABLED(MESH_BED_LEVELING) @@ -1539,15 +1543,13 @@ void kill_screen(const char* lcd_msg) { // Utility to go to the next mesh point inline void _manual_probe_goto_xy(float x, float y) { #if MANUAL_PROBE_HEIGHT > 0 - current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; - line_to_current(Z_AXIS); + line_to_z(LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT); #endif current_position[X_AXIS] = LOGICAL_X_POSITION(x); current_position[Y_AXIS] = LOGICAL_Y_POSITION(y); planner.buffer_line_kinematic(current_position, MMM_TO_MMS(XY_PROBE_SPEED), active_extruder); #if MANUAL_PROBE_HEIGHT > 0 - current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); - line_to_current(Z_AXIS); + line_to_z(LOGICAL_Z_POSITION(Z_MIN_POS)); #endif lcd_synchronize(); } @@ -1629,10 +1631,8 @@ void kill_screen(const char* lcd_msg) { // if (encoderPosition) { refresh_cmd_timeout(); - current_position[Z_AXIS] += float((int32_t)encoderPosition) * (MBL_Z_STEP); - NOLESS(current_position[Z_AXIS], -(LCD_PROBE_Z_RANGE) * 0.5); - NOMORE(current_position[Z_AXIS], (LCD_PROBE_Z_RANGE) * 0.5); - line_to_current(Z_AXIS); + const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP); + line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5)); lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; encoderPosition = 0; } @@ -2299,15 +2299,13 @@ void kill_screen(const char* lcd_msg) { reset_bed_level(); // After calibration bed-level data is no longer valid #endif - current_position[Z_AXIS] = max(Z_HOMING_HEIGHT, Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5; - line_to_current(Z_AXIS); + line_to_z(max(Z_HOMING_HEIGHT, Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5); current_position[X_AXIS] = a < 0 ? LOGICAL_X_POSITION(X_HOME_POS) : cos(RADIANS(a)) * delta_calibration_radius; current_position[Y_AXIS] = a < 0 ? LOGICAL_Y_POSITION(Y_HOME_POS) : sin(RADIANS(a)) * delta_calibration_radius; - line_to_current(Z_AXIS); + line_to_current_z(); - current_position[Z_AXIS] = 4.0; - line_to_current(Z_AXIS); + line_to_z(4.0); lcd_synchronize(); @@ -2536,8 +2534,7 @@ void kill_screen(const char* lcd_msg) { #if ENABLED(DELTA) #define _MOVE_XY_ALLOWED (current_position[Z_AXIS] <= delta_clip_start_height) void lcd_lower_z_to_clip_height() { - current_position[Z_AXIS] = delta_clip_start_height; - line_to_current(Z_AXIS); + line_to_z(delta_clip_start_height); lcd_synchronize(); } #else From 36cc03a9b48ef66e592068f6fee5d982d20ef503 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 02:58:31 -0500 Subject: [PATCH 07/16] Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate --- Marlin/Marlin_main.cpp | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 73990e71e5..ec0152aa09 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1499,8 +1499,8 @@ static void set_axis_is_at_home(const AxisEnum axis) { * Some planner shorthand inline functions */ inline float get_homing_bump_feedrate(const AxisEnum axis) { - int constexpr homing_bump_divisor[] = HOMING_BUMP_DIVISOR; - int hbd = homing_bump_divisor[axis]; + const uint8_t homing_bump_divisor[] PROGMEM = HOMING_BUMP_DIVISOR; + uint8_t hbd = pgm_read_byte(&homing_bump_divisor[axis]); if (hbd < 1) { hbd = 10; SERIAL_ECHO_START; From 4134a6b526fa6c9bbdc60b89bd6d9037df8a1fa7 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 04:03:01 -0500 Subject: [PATCH 08/16] Save 88b PROGMEM, 48 bytes SRAM in settings.reset --- Marlin/configuration_store.cpp | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index d9d71ce4b4..90e5efc551 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -1125,12 +1125,12 @@ void MarlinSettings::postprocess() { * M502 - Reset Configuration */ void MarlinSettings::reset() { - const float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] = DEFAULT_MAX_FEEDRATE; - const uint32_t tmp3[] = DEFAULT_MAX_ACCELERATION; + static const float tmp1[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] PROGMEM = DEFAULT_MAX_FEEDRATE; + static const uint32_t tmp3[] PROGMEM = DEFAULT_MAX_ACCELERATION; LOOP_XYZE_N(i) { - planner.axis_steps_per_mm[i] = tmp1[i < COUNT(tmp1) ? i : COUNT(tmp1) - 1]; - planner.max_feedrate_mm_s[i] = tmp2[i < COUNT(tmp2) ? i : COUNT(tmp2) - 1]; - planner.max_acceleration_mm_per_s2[i] = tmp3[i < COUNT(tmp3) ? i : COUNT(tmp3) - 1]; + planner.axis_steps_per_mm[i] = pgm_read_float(&tmp1[i < COUNT(tmp1) ? i : COUNT(tmp1) - 1]); + planner.max_feedrate_mm_s[i] = pgm_read_float(&tmp2[i < COUNT(tmp2) ? i : COUNT(tmp2) - 1]); + planner.max_acceleration_mm_per_s2[i] = pgm_read_float(&tmp3[i < COUNT(tmp3) ? i : COUNT(tmp3) - 1]); } planner.acceleration = DEFAULT_ACCELERATION; @@ -1265,9 +1265,9 @@ void MarlinSettings::reset() { endstops.enable_globally( #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT) - (true) + true #else - (false) + false #endif ); From c9e3caf928eb9024b735f682a869c86d1d2ea524 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 06:10:10 -0500 Subject: [PATCH 09/16] Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C --- Marlin/Marlin_main.cpp | 2 +- Marlin/SanityCheck.h | 10 +++++++ Marlin/digipot_mcp4018.cpp | 57 ++++++++++++++++++++++++-------------- Marlin/digipot_mcp4451.cpp | 12 ++++---- 4 files changed, 53 insertions(+), 28 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index ec0152aa09..4bbd804984 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -782,7 +782,7 @@ extern "C" { #endif // !SDSUPPORT #if ENABLED(DIGIPOT_I2C) - extern void digipot_i2c_set_current(int channel, float current); + extern void digipot_i2c_set_current(uint8_t channel, float current); extern void digipot_i2c_init(); #endif diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 83dabc975e..88f05d9dd1 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -1165,6 +1165,16 @@ static_assert(1 >= 0 #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." #endif +/** + * Digipot requirement + */ +#if ENABLED(DIGIPOT_MCP4018) + #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \ + || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1) + #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined." + #endif +#endif + /** * Require 4 or more elements in per-axis initializers */ diff --git a/Marlin/digipot_mcp4018.cpp b/Marlin/digipot_mcp4018.cpp index a14419c4d6..a13302b034 100644 --- a/Marlin/digipot_mcp4018.cpp +++ b/Marlin/digipot_mcp4018.cpp @@ -24,6 +24,7 @@ #if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018) +#include "enum.h" #include "Stream.h" #include "utility/twi.h" #include //https://github.com/stawel/SlowSoftI2CMaster @@ -38,31 +39,47 @@ #define DIGIPOT_A4988_Itripmax(Vref) ((Vref)/(8.0*DIGIPOT_A4988_Rsx)) -#define DIGIPOT_A4988_FACTOR (DIGIPOT_A4988_MAX_VALUE/DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax)) +#define DIGIPOT_A4988_FACTOR ((DIGIPOT_A4988_MAX_VALUE)/DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax)) //TODO: MAX_CURRENT -0.5A ?? (currently set to 2A, max possible current 2.5A) #define DIGIPOT_A4988_MAX_CURRENT (DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax) - 0.5) -static byte current_to_wiper(float current) { - return byte(ceil(float((DIGIPOT_A4988_FACTOR * current)))); +static byte current_to_wiper(const float current) { + return byte(ceil(float(DIGIPOT_A4988_FACTOR) * current)); } -static uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = { - DIGIPOTS_I2C_SDA_X, - DIGIPOTS_I2C_SDA_Y, - DIGIPOTS_I2C_SDA_Z, - DIGIPOTS_I2C_SDA_E0, - DIGIPOTS_I2C_SDA_E1, +const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = { + DIGIPOTS_I2C_SDA_X + #if DIGIPOT_I2C_NUM_CHANNELS > 1 + , DIGIPOTS_I2C_SDA_Y + #if DIGIPOT_I2C_NUM_CHANNELS > 2 + , DIGIPOTS_I2C_SDA_Z + #if DIGIPOT_I2C_NUM_CHANNELS > 3 + , DIGIPOTS_I2C_SDA_E0 + #if DIGIPOT_I2C_NUM_CHANNELS > 4 + , DIGIPOTS_I2C_SDA_E1 + #endif + #endif + #endif + #endif }; static SlowSoftI2CMaster pots[DIGIPOT_I2C_NUM_CHANNELS] = { - SlowSoftI2CMaster { sda_pins[0], DIGIPOTS_I2C_SCL }, - SlowSoftI2CMaster { sda_pins[1], DIGIPOTS_I2C_SCL }, - SlowSoftI2CMaster { sda_pins[2], DIGIPOTS_I2C_SCL }, - SlowSoftI2CMaster { sda_pins[3], DIGIPOTS_I2C_SCL }, - SlowSoftI2CMaster { sda_pins[4], DIGIPOTS_I2C_SCL } + SlowSoftI2CMaster { sda_pins[X_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 1 + , SlowSoftI2CMaster { sda_pins[Y_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 2 + , SlowSoftI2CMaster { sda_pins[Z_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 3 + , SlowSoftI2CMaster { sda_pins[E_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 4 + , SlowSoftI2CMaster { sda_pins[E_AXIS + 1], DIGIPOTS_I2C_SCL } + #endif + #endif + #endif + #endif }; -static void i2c_send(int channel, byte v) { +static void i2c_send(const uint8_t channel, const byte v) { if (WITHIN(channel, 0, DIGIPOT_I2C_NUM_CHANNELS - 1)) { pots[channel].i2c_start(((DIGIPOT_I2C_ADDRESS) << 1) | I2C_WRITE); pots[channel].i2c_write(v); @@ -71,21 +88,19 @@ static void i2c_send(int channel, byte v) { } // This is for the MCP4018 I2C based digipot -void digipot_i2c_set_current(int channel, float current) { - current = min(max(current, 0.0f), float(DIGIPOT_A4988_MAX_CURRENT)); - - i2c_send(channel, current_to_wiper(current)); +void digipot_i2c_set_current(uint8_t channel, float current) { + i2c_send(channel, current_to_wiper(min(max(current, 0.0f), float(DIGIPOT_A4988_MAX_CURRENT)))); } void digipot_i2c_init() { - const float digipot_motor_current[] = DIGIPOT_I2C_MOTOR_CURRENTS; + static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS; for (uint8_t i = 0; i < DIGIPOT_I2C_NUM_CHANNELS; i++) pots[i].i2c_init(); // setup initial currents as defined in Configuration_adv.h for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) - digipot_i2c_set_current(i, digipot_motor_current[i]); + digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i])); } #endif // DIGIPOT_I2C && DIGIPOT_MCP4018 diff --git a/Marlin/digipot_mcp4451.cpp b/Marlin/digipot_mcp4451.cpp index 419d3a423f..6e94778cf2 100644 --- a/Marlin/digipot_mcp4451.cpp +++ b/Marlin/digipot_mcp4451.cpp @@ -37,11 +37,11 @@ #define DIGIPOT_I2C_MAX_CURRENT 2.5 #endif -static byte current_to_wiper(float current) { +static byte current_to_wiper(const float current) { return byte(ceil(float((DIGIPOT_I2C_FACTOR * current)))); } -static void i2c_send(byte addr, byte a, byte b) { +static void i2c_send(const byte addr, const byte a, const byte b) { Wire.beginTransmission(addr); Wire.write(a); Wire.write(b); @@ -49,7 +49,7 @@ static void i2c_send(byte addr, byte a, byte b) { } // This is for the MCP4451 I2C based digipot -void digipot_i2c_set_current(int channel, float current) { +void digipot_i2c_set_current(uint8_t channel, float current) { current = min((float) max(current, 0.0f), DIGIPOT_I2C_MAX_CURRENT); // these addresses are specific to Azteeg X3 Pro, can be set to others, // In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1 @@ -69,11 +69,11 @@ void digipot_i2c_set_current(int channel, float current) { } void digipot_i2c_init() { - const float digipot_motor_current[] = DIGIPOT_I2C_MOTOR_CURRENTS; + static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS; Wire.begin(); // setup initial currents as defined in Configuration_adv.h - for (int i = 0; i < COUNT(digipot_motor_current); i++) - digipot_i2c_set_current(i, digipot_motor_current[i]); + for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) + digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i])); } #endif // DIGIPOT_I2C From b7dc4d9973f503026dae528949594d03861fede4 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 06:33:06 -0500 Subject: [PATCH 10/16] Save 92b PROGMEM, 14b SRAM with extruder auto fan --- Marlin/temperature.cpp | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index ea3a9a91f2..1244a55b1c 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -472,8 +472,8 @@ int Temperature::getHeaterPower(int heater) { #if HAS_AUTO_FAN void Temperature::checkExtruderAutoFans() { - constexpr int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN }; - constexpr int fanBit[] = { + static const int8_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN }; + static const uint8_t fanBit[] PROGMEM = { 0, AUTO_1_IS_0 ? 0 : 1, AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2, @@ -482,20 +482,20 @@ int Temperature::getHeaterPower(int heater) { }; uint8_t fanState = 0; - HOTEND_LOOP() { + HOTEND_LOOP() if (current_temperature[e] > EXTRUDER_AUTO_FAN_TEMPERATURE) - SBI(fanState, fanBit[e]); - } + SBI(fanState, pgm_read_byte(&fanBit[e])); uint8_t fanDone = 0; for (uint8_t f = 0; f < COUNT(fanPin); f++) { - int8_t pin = fanPin[f]; - if (pin >= 0 && !TEST(fanDone, fanBit[f])) { - uint8_t newFanSpeed = TEST(fanState, fanBit[f]) ? EXTRUDER_AUTO_FAN_SPEED : 0; + int8_t pin = pgm_read_byte(&fanPin[f]); + const uint8_t bit = pgm_read_byte(&fanBit[f]); + if (pin >= 0 && !TEST(fanDone, bit)) { + uint8_t newFanSpeed = TEST(fanState, bit) ? EXTRUDER_AUTO_FAN_SPEED : 0; // this idiom allows both digital and PWM fan outputs (see M42 handling). digitalWrite(pin, newFanSpeed); analogWrite(pin, newFanSpeed); - SBI(fanDone, fanBit[f]); + SBI(fanDone, bit); } } } From 6bb05c45433876f9be80fe23886c1282752f9311 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 07:18:46 -0500 Subject: [PATCH 11/16] Save 20b in smart_fill_mesh with PROGMEM --- Marlin/ubl_G29.cpp | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 28a1cb3bd1..ab0ac32cb3 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -1593,24 +1593,33 @@ typedef struct { uint8_t sx, ex, sy, ey; bool yfirst; } smart_fill_info; void unified_bed_leveling::smart_fill_mesh() { - const smart_fill_info info[] = { - { 0, GRID_MAX_POINTS_X, 0, GRID_MAX_POINTS_Y - 2, false }, // Bottom of the mesh looking up - { 0, GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y - 1, 0, false }, // Top of the mesh looking down - { 0, GRID_MAX_POINTS_X - 2, 0, GRID_MAX_POINTS_Y, true }, // Left side of the mesh looking right - { GRID_MAX_POINTS_X - 1, 0, 0, GRID_MAX_POINTS_Y, true } // Right side of the mesh looking left - }; + static const smart_fill_info + info0 PROGMEM = { 0, GRID_MAX_POINTS_X, 0, GRID_MAX_POINTS_Y - 2, false }, // Bottom of the mesh looking up + info1 PROGMEM = { 0, GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y - 1, 0, false }, // Top of the mesh looking down + info2 PROGMEM = { 0, GRID_MAX_POINTS_X - 2, 0, GRID_MAX_POINTS_Y, true }, // Left side of the mesh looking right + info3 PROGMEM = { GRID_MAX_POINTS_X - 1, 0, 0, GRID_MAX_POINTS_Y, true }; // Right side of the mesh looking left + static const smart_fill_info * const info[] PROGMEM = { &info0, &info1, &info2, &info3 }; + + // static const smart_fill_info info[] PROGMEM = { + // { 0, GRID_MAX_POINTS_X, 0, GRID_MAX_POINTS_Y - 2, false } PROGMEM, // Bottom of the mesh looking up + // { 0, GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y - 1, 0, false } PROGMEM, // Top of the mesh looking down + // { 0, GRID_MAX_POINTS_X - 2, 0, GRID_MAX_POINTS_Y, true } PROGMEM, // Left side of the mesh looking right + // { GRID_MAX_POINTS_X - 1, 0, 0, GRID_MAX_POINTS_Y, true } PROGMEM // Right side of the mesh looking left + // }; for (uint8_t i = 0; i < COUNT(info); ++i) { - const smart_fill_info &f = info[i]; - if (f.yfirst) { - const int8_t dir = f.ex > f.sx ? 1 : -1; - for (uint8_t y = f.sy; y != f.ey; ++y) - for (uint8_t x = f.sx; x != f.ex; x += dir) + const smart_fill_info *f = (smart_fill_info*)pgm_read_word(&info[i]); + const int8_t sx = pgm_read_word(&f->sx), sy = pgm_read_word(&f->sy), + ex = pgm_read_word(&f->ex), ey = pgm_read_word(&f->ey); + if (pgm_read_byte(&f->yfirst)) { + const int8_t dir = ex > sx ? 1 : -1; + for (uint8_t y = sy; y != ey; ++y) + for (uint8_t x = sx; x != ex; x += dir) if (smart_fill_one(x, y, dir, 0)) break; } else { - const int8_t dir = f.ey > f.sy ? 1 : -1; - for (uint8_t x = f.sx; x != f.ex; ++x) - for (uint8_t y = f.sy; y != f.ey; y += dir) + const int8_t dir = ey > sy ? 1 : -1; + for (uint8_t x = sx; x != ex; ++x) + for (uint8_t y = sy; y != ey; y += dir) if (smart_fill_one(x, y, 0, dir)) break; } } From 9128d9ab45b4f73a8b7d3f21ae84691619da21e5 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 6 Jun 2017 07:19:27 -0500 Subject: [PATCH 12/16] Improve sanity checks with static_assert, organize --- Marlin/SanityCheck.h | 364 +++++++++++++++++++++++-------------------- 1 file changed, 199 insertions(+), 165 deletions(-) diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 88f05d9dd1..440144cf8f 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -270,23 +270,6 @@ #endif #endif -/** - * Delta requirements - */ -#if ENABLED(DELTA) - #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG) - #error "You probably want to use Max Endstops for DELTA!" - #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_DELTA - #error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." - #elif ABL_GRID - #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0 - #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers." - #elif GRID_MAX_POINTS_X < 3 - #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher." - #endif - #endif -#endif - /** * Babystepping */ @@ -430,44 +413,57 @@ #endif /** - * Allow only one bed leveling option to be defined + * Kinematics + */ + +/** + * Allow only one kinematic type to be defined */ static_assert(1 >= 0 - #if ENABLED(AUTO_BED_LEVELING_LINEAR) + #if ENABLED(DELTA) + 1 #endif - #if ENABLED(AUTO_BED_LEVELING_3POINT) + #if ENABLED(MORGAN_SCARA) + 1 #endif - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + #if ENABLED(MAKERARM_SCARA) + 1 #endif - #if ENABLED(AUTO_BED_LEVELING_UBL) + #if ENABLED(COREXY) + 1 #endif - #if ENABLED(MESH_BED_LEVELING) + #if ENABLED(COREXZ) + 1 #endif - , "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." + #if ENABLED(COREYZ) + + 1 + #endif + #if ENABLED(COREYX) + + 1 + #endif + #if ENABLED(COREZX) + + 1 + #endif + #if ENABLED(COREZY) + + 1 + #endif + , "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY." ); /** - * Mesh Bed Leveling + * Delta requirements */ -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - #error "MESH_BED_LEVELING does not yet support DELTA printers." - #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9 - #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL." - #endif -#endif - -/** - * Unified Bed Leveling - */ -#if ENABLED(AUTO_BED_LEVELING_UBL) - #if IS_SCARA - #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers." +#if ENABLED(DELTA) + #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG) + #error "You probably want to use Max Endstops for DELTA!" + #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_DELTA + #error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." + #elif ABL_GRID + #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0 + #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers." + #elif GRID_MAX_POINTS_X < 3 + #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher." + #endif #endif #endif @@ -503,7 +499,6 @@ static_assert(1 >= 0 , "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo." ); - #if PROBE_SELECTED /** @@ -593,6 +588,114 @@ static_assert(1 >= 0 #endif +/** + * Allow only one bed leveling option to be defined + */ +static_assert(1 >= 0 + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + + 1 + #endif + #if ENABLED(AUTO_BED_LEVELING_3POINT) + + 1 + #endif + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + 1 + #endif + #if ENABLED(AUTO_BED_LEVELING_UBL) + + 1 + #endif + #if ENABLED(MESH_BED_LEVELING) + + 1 + #endif + , "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." +); + +/** + * Bed Leveling Requirements + */ + +#if ENABLED(AUTO_BED_LEVELING_UBL) + + /** + * Unified Bed Leveling + */ + + #if IS_SCARA + #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers." + #elif DISABLED(EEPROM_SETTINGS) + #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." + #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) + #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." + #else + static_assert(WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_1_X can't be reached by the Z probe."); + static_assert(WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_2_X can't be reached by the Z probe."); + static_assert(WITHIN(UBL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_3_X can't be reached by the Z probe."); + static_assert(WITHIN(UBL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y), "UBL_PROBE_PT_1_Y can't be reached by the Z probe."); + static_assert(WITHIN(UBL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y), "UBL_PROBE_PT_2_Y can't be reached by the Z probe."); + static_assert(WITHIN(UBL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y), "UBL_PROBE_PT_3_Y can't be reached by the Z probe."); + #endif + +#elif HAS_ABL + + /** + * Auto Bed Leveling + */ + + #if ENABLED(USE_RAW_KINEMATICS) + #error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING" + #endif + + /** + * Delta and SCARA have limited bed leveling options + */ + #if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR) + #error "Only AUTO_BED_LEVELING_BILINEAR currently supports SCARA bed leveling." + #endif + + /** + * Check auto bed leveling probe points + */ + #if ABL_GRID + + #ifdef DELTA_PROBEABLE_RADIUS + static_assert(LEFT_PROBE_BED_POSITION >= -DELTA_PROBEABLE_RADIUS, "LEFT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS."); + static_assert(RIGHT_PROBE_BED_POSITION <= DELTA_PROBEABLE_RADIUS, "RIGHT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS."); + static_assert(FRONT_PROBE_BED_POSITION >= -DELTA_PROBEABLE_RADIUS, "FRONT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS."); + static_assert(BACK_PROBE_BED_POSITION <= DELTA_PROBEABLE_RADIUS, "BACK_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS."); + #else + static_assert(LEFT_PROBE_BED_POSITION < RIGHT_PROBE_BED_POSITION, "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."); + static_assert(FRONT_PROBE_BED_POSITION < BACK_PROBE_BED_POSITION, "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."); + static_assert(LEFT_PROBE_BED_POSITION >= MIN_PROBE_X, "LEFT_PROBE_BED_POSITION can't be reached by the Z probe."); + static_assert(RIGHT_PROBE_BED_POSITION <= MAX_PROBE_X, "RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."); + static_assert(FRONT_PROBE_BED_POSITION >= MIN_PROBE_Y, "FRONT_PROBE_BED_POSITION can't be reached by the Z probe."); + static_assert(BACK_PROBE_BED_POSITION <= MAX_PROBE_Y, "BACK_PROBE_BED_POSITION can't be reached by the Z probe."); + #endif + + #else // AUTO_BED_LEVELING_3POINT + + static_assert(WITHIN(ABL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "ABL_PROBE_PT_1_X can't be reached by the Z probe."); + static_assert(WITHIN(ABL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "ABL_PROBE_PT_2_X can't be reached by the Z probe."); + static_assert(WITHIN(ABL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "ABL_PROBE_PT_3_X can't be reached by the Z probe."); + static_assert(WITHIN(ABL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y), "ABL_PROBE_PT_1_Y can't be reached by the Z probe."); + static_assert(WITHIN(ABL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y), "ABL_PROBE_PT_2_Y can't be reached by the Z probe."); + static_assert(WITHIN(ABL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y), "ABL_PROBE_PT_3_Y can't be reached by the Z probe."); + + #endif // AUTO_BED_LEVELING_3POINT + +#elif ENABLED(MESH_BED_LEVELING) + + /** + * Mesh Bed Leveling + */ + + #if ENABLED(DELTA) + #error "MESH_BED_LEVELING does not yet support DELTA printers." + #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9 + #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL." + #endif + +#endif + /** * LCD_BED_LEVELING requirements */ @@ -630,83 +733,6 @@ static_assert(1 >= 0 #endif #endif // Z_SAFE_HOMING -/** - * Auto Bed Leveling - */ -#if HAS_ABL - - #if ENABLED(USE_RAW_KINEMATICS) - #error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING" - #endif - - /** - * Delta and SCARA have limited bed leveling options - */ - #if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR) - #error "Only AUTO_BED_LEVELING_BILINEAR currently supports SCARA bed leveling." - #endif - - /** - * Check auto bed leveling sub-options, especially probe points - */ - #if ABL_GRID - #ifndef DELTA_PROBEABLE_RADIUS - #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION - #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION." - #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION - #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION." - #endif - #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X - #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X - #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y - #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y - #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe." - #endif - #endif - #elif ENABLED(AUTO_BED_LEVELING_UBL) - #if DISABLED(EEPROM_SETTINGS) - #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." - #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) - #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." - #endif - #if IS_CARTESIAN - #if !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) - #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." - #elif !WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given UBL_PROBE_PT_1_X can't be reached by the Z probe." - #elif !WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given UBL_PROBE_PT_2_X can't be reached by the Z probe." - #elif !WITHIN(UBL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given UBL_PROBE_PT_3_X can't be reached by the Z probe." - #elif !WITHIN(UBL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given UBL_PROBE_PT_1_Y can't be reached by the Z probe." - #elif !WITHIN(UBL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given UBL_PROBE_PT_2_Y can't be reached by the Z probe." - #elif !WITHIN(UBL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given UBL_PROBE_PT_3_Y can't be reached by the Z probe." - #endif - #endif - #else // AUTO_BED_LEVELING_3POINT - #if !WITHIN(ABL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe." - #elif !WITHIN(ABL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe." - #elif !WITHIN(ABL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X) - #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe." - #elif !WITHIN(ABL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe." - #elif !WITHIN(ABL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe." - #elif !WITHIN(ABL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y) - #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe." - #endif - #endif // AUTO_BED_LEVELING_3POINT - -#endif // HAS_ABL - /** * Advance Extrusion */ @@ -739,40 +765,6 @@ static_assert(1 >= 0 #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." #endif -/** - * Don't set more than one kinematic type - */ -static_assert(1 >= 0 - #if ENABLED(DELTA) - + 1 - #endif - #if ENABLED(MORGAN_SCARA) - + 1 - #endif - #if ENABLED(MAKERARM_SCARA) - + 1 - #endif - #if ENABLED(COREXY) - + 1 - #endif - #if ENABLED(COREXZ) - + 1 - #endif - #if ENABLED(COREYZ) - + 1 - #endif - #if ENABLED(COREYX) - + 1 - #endif - #if ENABLED(COREZX) - + 1 - #endif - #if ENABLED(COREZY) - + 1 - #endif - , "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY." -); - /** * Allen Key * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. @@ -1147,22 +1139,64 @@ static_assert(1 >= 0 , "Please select no more than one LCD controller option." ); -#if ENABLED(HAVE_TMC2130) && !( \ - ENABLED( X_IS_TMC2130 ) \ - || ENABLED( X2_IS_TMC2130 ) \ - || ENABLED( Y_IS_TMC2130 ) \ - || ENABLED( Y2_IS_TMC2130 ) \ - || ENABLED( Z_IS_TMC2130 ) \ - || ENABLED( Z2_IS_TMC2130 ) \ - || ENABLED( E0_IS_TMC2130 ) \ - || ENABLED( E1_IS_TMC2130 ) \ - || ENABLED( E2_IS_TMC2130 ) \ - || ENABLED( E3_IS_TMC2130 ) ) - #error "Choose at least one TMC2130 stepper." +/** + * Make sure HAVE_TMCDRIVER is warranted + */ +#if ENABLED(HAVE_TMCDRIVER) && !( \ + ENABLED( X_IS_TMC ) \ + || ENABLED( X2_IS_TMC ) \ + || ENABLED( Y_IS_TMC ) \ + || ENABLED( Y2_IS_TMC ) \ + || ENABLED( Z_IS_TMC ) \ + || ENABLED( Z2_IS_TMC ) \ + || ENABLED( E0_IS_TMC ) \ + || ENABLED( E1_IS_TMC ) \ + || ENABLED( E2_IS_TMC ) \ + || ENABLED( E3_IS_TMC ) \ + || ENABLED( E4_IS_TMC ) \ + ) + #error "HAVE_TMCDRIVER requires at least one TMC stepper to be set." #endif -#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) - #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." +/** + * Make sure HAVE_TMC2130 is warranted + */ +#if ENABLED(HAVE_TMC2130) + #if !( ENABLED( X_IS_TMC2130 ) \ + || ENABLED( X2_IS_TMC2130 ) \ + || ENABLED( Y_IS_TMC2130 ) \ + || ENABLED( Y2_IS_TMC2130 ) \ + || ENABLED( Z_IS_TMC2130 ) \ + || ENABLED( Z2_IS_TMC2130 ) \ + || ENABLED( E0_IS_TMC2130 ) \ + || ENABLED( E1_IS_TMC2130 ) \ + || ENABLED( E2_IS_TMC2130 ) \ + || ENABLED( E3_IS_TMC2130 ) \ + || ENABLED( E4_IS_TMC2130 ) \ + ) + #error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set." + #elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) + #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." + #endif +#endif + +/** + * Make sure HAVE_L6470DRIVER is warranted + */ +#if ENABLED(HAVE_L6470DRIVER) && !( \ + ENABLED( X_IS_L6470 ) \ + || ENABLED( X2_IS_L6470 ) \ + || ENABLED( Y_IS_L6470 ) \ + || ENABLED( Y2_IS_L6470 ) \ + || ENABLED( Z_IS_L6470 ) \ + || ENABLED( Z2_IS_L6470 ) \ + || ENABLED( E0_IS_L6470 ) \ + || ENABLED( E1_IS_L6470 ) \ + || ENABLED( E2_IS_L6470 ) \ + || ENABLED( E3_IS_L6470 ) \ + || ENABLED( E4_IS_L6470 ) \ + ) + #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set." #endif /** From dac29e0f7526e9ca5e59b8827e4530a02fb48212 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 7 Jun 2017 06:14:24 -0500 Subject: [PATCH 13/16] Cleaner failure of UBL without EEPROM --- Marlin/Marlin_main.cpp | 51 +++++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 21 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 4bbd804984..f66d1c6d4f 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -8866,25 +8866,43 @@ void quickstop_stepper() { inline void gcode_M420() { #if ENABLED(AUTO_BED_LEVELING_UBL) + // L to load a mesh from the EEPROM if (parser.seen('L')) { - const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.state.storage_slot; - const int16_t a = settings.calc_num_meshes(); - if (!a) { + #if ENABLED(EEPROM_SETTINGS) + const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.state.storage_slot; + const int16_t a = settings.calc_num_meshes(); + + if (!a) { + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + return; + } + + if (!WITHIN(storage_slot, 0, a - 1)) { + SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + return; + } + + settings.load_mesh(storage_slot); + ubl.state.storage_slot = storage_slot; + + #else + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); return; - } - if (!WITHIN(storage_slot, 0, a - 1)) { - SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); - SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); - return; - } - - settings.load_mesh(storage_slot); - ubl.state.storage_slot = storage_slot; + #endif } + + // L to load a mesh from the EEPROM + if (parser.seen('L') || parser.seen('V')) { + ubl.display_map(0); // Currently only supports one map type + SERIAL_ECHOLNPAIR("UBL_MESH_VALID = ", UBL_MESH_VALID); + SERIAL_ECHOLNPAIR("ubl.state.storage_slot = ", ubl.state.storage_slot); + } + #endif // AUTO_BED_LEVELING_UBL // V to print the matrix or mesh @@ -8906,15 +8924,6 @@ void quickstop_stepper() { #endif } - #if ENABLED(AUTO_BED_LEVELING_UBL) - // L to load a mesh from the EEPROM - if (parser.seen('L') || parser.seen('V')) { - ubl.display_map(0); // Currently only supports one map type - SERIAL_ECHOLNPAIR("UBL_MESH_VALID = ", UBL_MESH_VALID); - SERIAL_ECHOLNPAIR("ubl.state.storage_slot = ", ubl.state.storage_slot); - } - #endif - bool to_enable = false; if (parser.seen('S')) { to_enable = parser.value_bool(); From a27b08e6af12782c17e19ba9d87198048b988aee Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 7 Jun 2017 07:12:19 -0500 Subject: [PATCH 14/16] Various code style tweaks --- Marlin/G26_Mesh_Validation_Tool.cpp | 16 ++--- Marlin/Marlin_main.cpp | 100 ++++++++++++++++------------ Marlin/ubl.h | 5 +- Marlin/ubl_motion.cpp | 18 +++-- 4 files changed, 76 insertions(+), 63 deletions(-) diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index 5c8802ef41..d8cc62e0ea 100644 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -252,8 +252,8 @@ // Move nozzle to the specified height for the first layer set_destination_to_current(); destination[Z_AXIS] = g26_layer_height; - move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0.0); - move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], g26_ooze_amount); + move_to(destination, 0.0); + move_to(destination, g26_ooze_amount); has_control_of_lcd_panel = true; //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern.")); @@ -368,14 +368,14 @@ destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; //debug_current_and_destination(PSTR("ready to do Z-Raise.")); - move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0); // Raise the nozzle + move_to(destination, 0); // Raise the nozzle //debug_current_and_destination(PSTR("done doing Z-Raise.")); destination[X_AXIS] = g26_x_pos; // Move back to the starting position destination[Y_AXIS] = g26_y_pos; //destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is - move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0); // Move back to the starting position + move_to(destination, 0); // Move back to the starting position //debug_current_and_destination(PSTR("done doing X/Y move.")); has_control_of_lcd_panel = false; // Give back control of the LCD Panel! @@ -554,16 +554,16 @@ } - void unified_bed_leveling::retract_filament(float where[XYZE]) { + void unified_bed_leveling::retract_filament(const float where[XYZE]) { if (!g26_retracted) { // Only retract if we are not already retracted! g26_retracted = true; - move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], -1.0 * g26_retraction_multiplier); + move_to(where, -1.0 * g26_retraction_multiplier); } } - void unified_bed_leveling::recover_filament(float where[XYZE]) { + void unified_bed_leveling::recover_filament(const float where[XYZE]) { if (g26_retracted) { // Only un-retract if we are retracted. - move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], 1.2 * g26_retraction_multiplier); + move_to(where, 1.2 * g26_retraction_multiplier); g26_retracted = false; } } diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index f66d1c6d4f..5a1d1504d1 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1561,16 +1561,16 @@ inline void set_destination_to_current() { COPY(destination, current_position); * Plan a move to (X, Y, Z) and set the current_position * The final current_position may not be the one that was requested */ -void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s /*=0.0*/) { +void do_blocking_move_to(const float &lx, const float &ly, const float &lz, const float &fr_mm_s/*=0.0*/) { const float old_feedrate_mm_s = feedrate_mm_s; #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) print_xyz(PSTR(">>> do_blocking_move_to"), NULL, x, y, z); + if (DEBUGGING(LEVELING)) print_xyz(PSTR(">>> do_blocking_move_to"), NULL, lx, ly, lz); #endif #if ENABLED(DELTA) - if (!position_is_reachable_xy(x, y)) return; + if (!position_is_reachable_xy(lx, ly)) return; feedrate_mm_s = fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S; @@ -1582,10 +1582,10 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f // when in the danger zone if (current_position[Z_AXIS] > delta_clip_start_height) { - if (z > delta_clip_start_height) { // staying in the danger zone - destination[X_AXIS] = x; // move directly (uninterpolated) - destination[Y_AXIS] = y; - destination[Z_AXIS] = z; + if (lz > delta_clip_start_height) { // staying in the danger zone + destination[X_AXIS] = lx; // move directly (uninterpolated) + destination[Y_AXIS] = ly; + destination[Z_AXIS] = lz; prepare_uninterpolated_move_to_destination(); // set_current_to_destination #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("danger zone move", current_position); @@ -1601,23 +1601,23 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f } } - if (z > current_position[Z_AXIS]) { // raising? - destination[Z_AXIS] = z; + if (lz > current_position[Z_AXIS]) { // raising? + destination[Z_AXIS] = lz; prepare_uninterpolated_move_to_destination(); // set_current_to_destination #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("z raise move", current_position); #endif } - destination[X_AXIS] = x; - destination[Y_AXIS] = y; + destination[X_AXIS] = lx; + destination[Y_AXIS] = ly; prepare_move_to_destination(); // set_current_to_destination #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("xy move", current_position); #endif - if (z < current_position[Z_AXIS]) { // lowering? - destination[Z_AXIS] = z; + if (lz < current_position[Z_AXIS]) { // lowering? + destination[Z_AXIS] = lz; prepare_uninterpolated_move_to_destination(); // set_current_to_destination #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("z lower move", current_position); @@ -1626,44 +1626,44 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f #elif IS_SCARA - if (!position_is_reachable_xy(x, y)) return; + if (!position_is_reachable_xy(lx, ly)) return; set_destination_to_current(); // If Z needs to raise, do it before moving XY - if (destination[Z_AXIS] < z) { - destination[Z_AXIS] = z; + if (destination[Z_AXIS] < lz) { + destination[Z_AXIS] = lz; prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS)); } - destination[X_AXIS] = x; - destination[Y_AXIS] = y; + destination[X_AXIS] = lx; + destination[Y_AXIS] = ly; prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S); // If Z needs to lower, do it after moving XY - if (destination[Z_AXIS] > z) { - destination[Z_AXIS] = z; + if (destination[Z_AXIS] > lz) { + destination[Z_AXIS] = lz; prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS)); } #else // If Z needs to raise, do it before moving XY - if (current_position[Z_AXIS] < z) { + if (current_position[Z_AXIS] < lz) { feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS); - current_position[Z_AXIS] = z; + current_position[Z_AXIS] = lz; line_to_current_position(); } feedrate_mm_s = fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S; - current_position[X_AXIS] = x; - current_position[Y_AXIS] = y; + current_position[X_AXIS] = lx; + current_position[Y_AXIS] = ly; line_to_current_position(); // If Z needs to lower, do it after moving XY - if (current_position[Z_AXIS] > z) { + if (current_position[Z_AXIS] > lz) { feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS); - current_position[Z_AXIS] = z; + current_position[Z_AXIS] = lz; line_to_current_position(); } @@ -1677,14 +1677,14 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to"); #endif } -void do_blocking_move_to_x(const float &x, const float &fr_mm_s/*=0.0*/) { - do_blocking_move_to(x, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s); +void do_blocking_move_to_x(const float &lx, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(lx, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s); } -void do_blocking_move_to_z(const float &z, const float &fr_mm_s/*=0.0*/) { - do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z, fr_mm_s); +void do_blocking_move_to_z(const float &lz, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], lz, fr_mm_s); } -void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s/*=0.0*/) { - do_blocking_move_to(x, y, current_position[Z_AXIS], fr_mm_s); +void do_blocking_move_to_xy(const float &lx, const float &ly, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(lx, ly, current_position[Z_AXIS], fr_mm_s); } // @@ -1719,7 +1719,7 @@ static void clean_up_after_endstop_or_probe_move() { /** * Raise Z to a minimum height to make room for a probe to move */ - inline void do_probe_raise(float z_raise) { + inline void do_probe_raise(const float z_raise) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPAIR("do_probe_raise(", z_raise); @@ -1801,6 +1801,10 @@ static void clean_up_after_endstop_or_probe_move() { #elif ENABLED(Z_PROBE_ALLEN_KEY) + FORCE_INLINE void do_blocking_move_to(const float logical[XYZ], const float &fr_mm_s) { + do_blocking_move_to(logical[X_AXIS], logical[Y_AXIS], logical[Z_AXIS], fr_mm_s); + } + void run_deploy_moves_script() { #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Z) #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_X @@ -1815,7 +1819,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_1_X, Z_PROBE_ALLEN_KEY_DEPLOY_1_Y, Z_PROBE_ALLEN_KEY_DEPLOY_1_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE)); + const float deploy_1[] = { Z_PROBE_ALLEN_KEY_DEPLOY_1_X, Z_PROBE_ALLEN_KEY_DEPLOY_1_Y, Z_PROBE_ALLEN_KEY_DEPLOY_1_Z }; + do_blocking_move_to(deploy_1, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Z) #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_X @@ -1830,7 +1835,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_2_X, Z_PROBE_ALLEN_KEY_DEPLOY_2_Y, Z_PROBE_ALLEN_KEY_DEPLOY_2_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)); + const float deploy_2[] = { Z_PROBE_ALLEN_KEY_DEPLOY_2_X, Z_PROBE_ALLEN_KEY_DEPLOY_2_Y, Z_PROBE_ALLEN_KEY_DEPLOY_2_Z }; + do_blocking_move_to(deploy_2, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Z) #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_X @@ -1845,7 +1851,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_3_X, Z_PROBE_ALLEN_KEY_DEPLOY_3_Y, Z_PROBE_ALLEN_KEY_DEPLOY_3_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE)); + const float deploy_3[] = { Z_PROBE_ALLEN_KEY_DEPLOY_3_X, Z_PROBE_ALLEN_KEY_DEPLOY_3_Y, Z_PROBE_ALLEN_KEY_DEPLOY_3_Z }; + do_blocking_move_to(deploy_3, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Z) #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_X @@ -1860,7 +1867,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_4_X, Z_PROBE_ALLEN_KEY_DEPLOY_4_Y, Z_PROBE_ALLEN_KEY_DEPLOY_4_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE)); + const float deploy_4[] = { Z_PROBE_ALLEN_KEY_DEPLOY_4_X, Z_PROBE_ALLEN_KEY_DEPLOY_4_Y, Z_PROBE_ALLEN_KEY_DEPLOY_4_Z }; + do_blocking_move_to(deploy_4, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Z) #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_X @@ -1875,7 +1883,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_5_X, Z_PROBE_ALLEN_KEY_DEPLOY_5_Y, Z_PROBE_ALLEN_KEY_DEPLOY_5_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE)); + const float deploy_5[] = { Z_PROBE_ALLEN_KEY_DEPLOY_5_X, Z_PROBE_ALLEN_KEY_DEPLOY_5_Y, Z_PROBE_ALLEN_KEY_DEPLOY_5_Z }; + do_blocking_move_to(deploy_5, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE)); #endif } @@ -1893,7 +1902,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_1_X, Z_PROBE_ALLEN_KEY_STOW_1_Y, Z_PROBE_ALLEN_KEY_STOW_1_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE)); + const float stow_1[] = { Z_PROBE_ALLEN_KEY_STOW_1_X, Z_PROBE_ALLEN_KEY_STOW_1_Y, Z_PROBE_ALLEN_KEY_STOW_1_Z }; + do_blocking_move_to(stow_1, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_STOW_2_X) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Z) #ifndef Z_PROBE_ALLEN_KEY_STOW_2_X @@ -1908,7 +1918,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_2_X, Z_PROBE_ALLEN_KEY_STOW_2_Y, Z_PROBE_ALLEN_KEY_STOW_2_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE)); + const float stow_2[] = { Z_PROBE_ALLEN_KEY_STOW_2_X, Z_PROBE_ALLEN_KEY_STOW_2_Y, Z_PROBE_ALLEN_KEY_STOW_2_Z }; + do_blocking_move_to(stow_2, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_STOW_3_X) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Z) #ifndef Z_PROBE_ALLEN_KEY_STOW_3_X @@ -1923,7 +1934,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_3_X, Z_PROBE_ALLEN_KEY_STOW_3_Y, Z_PROBE_ALLEN_KEY_STOW_3_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE)); + const float stow_3[] = { Z_PROBE_ALLEN_KEY_STOW_3_X, Z_PROBE_ALLEN_KEY_STOW_3_Y, Z_PROBE_ALLEN_KEY_STOW_3_Z }; + do_blocking_move_to(stow_3, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_STOW_4_X) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Z) #ifndef Z_PROBE_ALLEN_KEY_STOW_4_X @@ -1938,7 +1950,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_4_X, Z_PROBE_ALLEN_KEY_STOW_4_Y, Z_PROBE_ALLEN_KEY_STOW_4_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE)); + const float stow_4[] = { Z_PROBE_ALLEN_KEY_STOW_4_X, Z_PROBE_ALLEN_KEY_STOW_4_Y, Z_PROBE_ALLEN_KEY_STOW_4_Z }; + do_blocking_move_to(stow_4, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE)); #endif #if defined(Z_PROBE_ALLEN_KEY_STOW_5_X) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Z) #ifndef Z_PROBE_ALLEN_KEY_STOW_5_X @@ -1953,7 +1966,8 @@ static void clean_up_after_endstop_or_probe_move() { #ifndef Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE 0.0 #endif - do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_5_X, Z_PROBE_ALLEN_KEY_STOW_5_Y, Z_PROBE_ALLEN_KEY_STOW_5_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE)); + const float stow_5[] = { Z_PROBE_ALLEN_KEY_STOW_5_X, Z_PROBE_ALLEN_KEY_STOW_5_Y, Z_PROBE_ALLEN_KEY_STOW_5_Z }; + do_blocking_move_to(stow_5, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE)); #endif } diff --git a/Marlin/ubl.h b/Marlin/ubl.h index 29ee83c358..d060f8f6b0 100644 --- a/Marlin/ubl.h +++ b/Marlin/ubl.h @@ -138,10 +138,11 @@ static bool look_for_lines_to_connect(); static bool turn_on_heaters(); static bool prime_nozzle(); - static void retract_filament(float where[XYZE]); - static void recover_filament(float where[XYZE]); + static void retract_filament(const float where[XYZE]); + static void recover_filament(const float where[XYZE]); static void print_line_from_here_to_there(const float&, const float&, const float&, const float&, const float&, const float&); static void move_to(const float&, const float&, const float&, const float&); + inline static void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); } #endif public: diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index 3eccee9b52..396251fb79 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -67,19 +67,17 @@ const float de = destination[E_AXIS] - current_position[E_AXIS]; - if (de == 0.0) return; + if (de == 0.0) return; // Printing moves only - const float dx = current_position[X_AXIS] - destination[X_AXIS], - dy = current_position[Y_AXIS] - destination[Y_AXIS], + const float dx = destination[X_AXIS] - current_position[X_AXIS], + dy = destination[Y_AXIS] - current_position[Y_AXIS], xy_dist = HYPOT(dx, dy); - if (xy_dist == 0.0) - return; - else { - SERIAL_ECHOPGM(" fpmm="); - const float fpmm = de / xy_dist; - SERIAL_ECHO_F(fpmm, 6); - } + if (xy_dist == 0.0) return; + + SERIAL_ECHOPGM(" fpmm="); + const float fpmm = de / xy_dist; + SERIAL_ECHO_F(fpmm, 6); SERIAL_ECHOPGM(" current=( "); SERIAL_ECHO_F(current_position[X_AXIS], 6); From e556ab1dff267245af93def2196469bc2b12739e Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 7 Jun 2017 09:40:07 -0500 Subject: [PATCH 15/16] Find three-point leveling points on Delta --- Marlin/Configuration.h | 6 ++++-- .../Cartesio/Configuration.h | 6 ++++-- .../example_configurations/Felix/Configuration.h | 6 ++++-- .../Felix/DUAL/Configuration.h | 6 ++++-- .../FolgerTech-i3-2020/Configuration.h | 6 ++++-- .../Hephestos/Configuration.h | 6 ++++-- .../Hephestos_2/Configuration.h | 6 ++++-- .../example_configurations/K8200/Configuration.h | 6 ++++-- .../example_configurations/K8400/Configuration.h | 6 ++++-- .../K8400/Dual-head/Configuration.h | 6 ++++-- .../example_configurations/M150/Configuration.h | 6 ++++-- .../RepRapWorld/Megatronics/Configuration.h | 6 ++++-- .../RigidBot/Configuration.h | 6 ++++-- .../example_configurations/SCARA/Configuration.h | 6 ++++-- .../example_configurations/TAZ4/Configuration.h | 6 ++++-- .../TinyBoy2/Configuration.h | 6 ++++-- .../WITBOX/Configuration.h | 6 ++++-- .../adafruit/ST7565/Configuration.h | 6 ++++-- .../delta/FLSUN/auto_calibrate/Configuration.h | 16 ++++++++++------ .../delta/FLSUN/kossel_mini/Configuration.h | 16 ++++++++++------ .../delta/generic/Configuration.h | 16 ++++++++++------ .../delta/kossel_mini/Configuration.h | 16 ++++++++++------ .../delta/kossel_pro/Configuration.h | 16 ++++++++++------ .../delta/kossel_xl/Configuration.h | 16 ++++++++++------ .../gCreate_gMax1.5+/Configuration.h | 6 ++++-- .../makibox/Configuration.h | 6 ++++-- .../tvrrug/Round2/Configuration.h | 6 ++++-- .../example_configurations/wt150/Configuration.h | 6 ++++-- 28 files changed, 148 insertions(+), 80 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 8b4735df1f..2ab907bafc 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -881,12 +881,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index b3b487ed44..0ded77ad5c 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -878,12 +878,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 95ee044ec1..6956cfda03 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -862,12 +862,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 86e386e15f..183759c6d7 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -862,12 +862,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h index ee45fa7bd5..370c0b2573 100644 --- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h @@ -884,12 +884,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y 10 - #define UBL_PROBE_PT_1_X 45 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 170 // of the mesh. + + #define UBL_PROBE_PT_1_X 45 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 170 #define UBL_PROBE_PT_2_X 45 #define UBL_PROBE_PT_2_Y 25 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 25 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index affcb9c27b..dca9646126 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -870,12 +870,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index cd0bae630a..98416e2c79 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -873,12 +873,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 6f5ce58ac1..369d315305 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -909,12 +909,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 5cc90ad08e..6b7a39efbe 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -880,12 +880,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 8c22763f7d..cfa443311d 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -880,12 +880,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/M150/Configuration.h b/Marlin/example_configurations/M150/Configuration.h index 7a1a0eaf49..3c85ce9ab5 100644 --- a/Marlin/example_configurations/M150/Configuration.h +++ b/Marlin/example_configurations/M150/Configuration.h @@ -907,12 +907,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index b887f6bce0..61ecc112a0 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -880,12 +880,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 92276ee9ec..7648087a05 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -878,12 +878,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 45a9c37b34..162536f06c 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -895,12 +895,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index a22b6987ad..de5eee2a07 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -899,12 +899,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index ace689cef3..d893a920df 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -936,12 +936,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 15432ef96b..1389cdc9e9 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -870,12 +870,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 8e6735ecd2..ef71b3b561 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -880,12 +880,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index f52882ee83..6a824599ef 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -999,12 +999,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 43cad5d57d..f29cc903b8 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1001,12 +1001,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index d6e183dc9e..5fb5d6747c 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -990,12 +990,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 71ce72e190..26d45ed197 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -993,12 +993,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 9bed47b50d..5028ad3bea 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -998,12 +998,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 39c44e47ce..52733e783d 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1056,12 +1056,16 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. - #define UBL_PROBE_PT_2_X 39 - #define UBL_PROBE_PT_2_Y 20 - #define UBL_PROBE_PT_3_X 180 - #define UBL_PROBE_PT_3_Y 20 + + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240) + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h index b193acca60..63b605cebb 100644 --- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h @@ -896,12 +896,14 @@ #define UBL_MESH_INSET 45 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 53 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 323 // of the mesh. + + #define UBL_PROBE_PT_1_X 53 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 323 #define UBL_PROBE_PT_2_X 53 #define UBL_PROBE_PT_2_Y 63 #define UBL_PROBE_PT_3_X 348 #define UBL_PROBE_PT_3_Y 211 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index bdb1d20469..8f22295bec 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -883,12 +883,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 75a450d36a..e6010071ca 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -875,12 +875,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 26e24c7035..81430e8ffa 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -885,12 +885,14 @@ #define UBL_MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define UBL_PROBE_PT_1_X 39 // These set the probe locations for when UBL does a 3-Point leveling - #define UBL_PROBE_PT_1_Y 180 // of the mesh. + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 #define UBL_PROBE_PT_2_X 39 #define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_Y 20 + #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle From 707707d71aa592b119cbf01b9e57d97060657cc1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 7 Jun 2017 16:06:25 -0500 Subject: [PATCH 16/16] Fix LCD status message padding --- Marlin/ultralcd.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 7f2c80e11b..627f4dd499 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -4165,7 +4165,7 @@ void pad_message_string() { // pad with spaces to fill up the line while (j++ < LCD_WIDTH) lcd_status_message[i++] = ' '; // chop off at the edge - lcd_status_message[i] = '\0'; + lcd_status_message[--i] = '\0'; } }