From 143ad74db70a363d977a2ef67b00cf22252eb1d8 Mon Sep 17 00:00:00 2001 From: jbrazio Date: Mon, 29 Feb 2016 11:27:09 +0000 Subject: [PATCH] Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config files. --- Marlin/Configuration.h | 37 +++++++++---------- .../Felix/Configuration.h | 23 ++++++++++-- .../Felix/Configuration_DUAL.h | 23 ++++++++++-- .../Hephestos/Configuration.h | 23 ++++++++++-- .../K8200/Configuration.h | 23 ++++++++++-- .../RepRapWorld/Megatronics/Configuration.h | 23 ++++++++++-- .../RigidBot/Configuration.h | 23 ++++++++++-- .../SCARA/Configuration.h | 23 ++++++++++-- .../TAZ4/Configuration.h | 23 ++++++++++-- .../WITBOX/Configuration.h | 23 ++++++++++-- .../adafruit/ST7565/Configuration.h | 23 ++++++++++-- .../delta/biv2.5/Configuration.h | 23 ++++++++++-- .../delta/generic/Configuration.h | 17 ++++++++- .../delta/kossel_mini/Configuration.h | 23 ++++++++++-- .../delta/kossel_pro/Configuration.h | 17 ++++++++- .../delta/kossel_xl/Configuration.h | 27 +++++++++++--- .../makibox/Configuration.h | 23 ++++++++++-- .../tvrrug/Round2/Configuration.h | 23 ++++++++++-- 18 files changed, 336 insertions(+), 84 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 7de3c46a6e..986dcc8aea 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -488,26 +488,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - /* - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - */ + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). + // X and Y offsets must be integers. + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left [of the nozzle] +right #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Z offset: -front [of the nozzle] +behind #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below [the nozzle] (always negative!) diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index dd126bd33f..a4eccb0722 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -470,11 +470,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index f487926edc..95f5e143f6 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -441,11 +441,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 1fd76a5a26..8caf0f610b 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -481,11 +481,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 40a3836702..ee5ab3f594 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -503,11 +503,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index ef5e6c14cf..62c4483e68 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 4d52a0823e..73a3db8739 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 6e262364d0..ef35f6b428 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -496,11 +496,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) //#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 3b55779c75..d2e2c7d259 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -507,11 +507,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 24ca92a926..e3a3a312ad 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -480,11 +480,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 8f23c4337e..48f1b16c3c 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index e26f970815..9111e3dc67 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -527,11 +527,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 6c27ff0966..5397ca343b 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -528,8 +528,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 119537ed37..965fef895b 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -528,11 +528,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 15 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 74ec19cf93..fb9025e715 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -515,8 +515,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) #define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919 #define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304 // Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index ead4199a47..4a536b76f8 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -520,11 +520,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 7 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. @@ -617,7 +632,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define HOMING_FEEDRATE {60*60, 60*60, 60*60, 0} // set the homing speeds (mm/min) // default settings -#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 #define XYZ_PULLEY_TEETH 16 @@ -779,7 +794,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI - + // SSD1306 OLED generic display support // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib //#define U8GLIB_SSD1306 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 00acc568e6..826d0339de 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -491,11 +491,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index edd49e799e..1d491946d3 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif // AUTO_BED_LEVELING_GRID - // Offsets to the Z probe relative to the nozzle tip. + // Z Probe to nozzle (X,Y) offset, relative to (0, 0). // X and Y offsets must be integers. - #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right - #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind - #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!) + // + // In the following example the X and Y offsets are both positive: + // #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + // + // +-- BACK ---+ + // | | + // L | (+) P | R <-- probe (20,20) + // E | | I + // F | (-) N (+) | G <-- nozzle (10,10) + // T | | H + // | (-) | T + // | | + // O-- FRONT --+ + // (0,0) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!) #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance. // Be sure you have this distance over your Z_MAX_POS in case.