Add POWER_OFF_DELAY option (#19987)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Hebezo 2020-11-09 01:37:41 +01:00 committed by Scott Lahteine
parent 44f689320b
commit 170ba87648
7 changed files with 29 additions and 12 deletions

View File

@ -344,9 +344,10 @@
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
#define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CONTROLLERFAN
#define AUTO_POWER_CHAMBER_FAN #define AUTO_POWER_CHAMBER_FAN
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
#endif #endif
#endif #endif

View File

@ -92,11 +92,13 @@ extern bool wait_for_heatup;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE); powersupply_on = true; }while(0) #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE); powersupply_on = false; }while(0) #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on() #define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off() #define PSU_OFF() powerManager.power_off()
#define PSU_OFF_SOON() powerManager.power_off_soon()
#else #else
#define PSU_ON() PSU_PIN_ON() #define PSU_ON() PSU_PIN_ON()
#define PSU_OFF() PSU_PIN_OFF() #define PSU_OFF() PSU_PIN_OFF()
#define PSU_OFF_SOON PSU_OFF
#endif #endif
#endif #endif

View File

@ -126,4 +126,12 @@ void Power::power_off() {
} }
} }
void Power::power_off_soon() {
#if POWER_OFF_DELAY
lastPowerOn = millis() - SEC_TO_MS(POWER_TIMEOUT) + SEC_TO_MS(POWER_OFF_DELAY);
#else
power_off();
#endif
}
#endif // AUTO_POWER_CONTROL #endif // AUTO_POWER_CONTROL

View File

@ -32,6 +32,7 @@ class Power {
static void check(); static void check();
static void power_on(); static void power_on();
static void power_off(); static void power_off();
static void power_off_soon();
private: private:
static millis_t lastPowerOn; static millis_t lastPowerOn;
static bool is_power_needed(); static bool is_power_needed();

View File

@ -105,7 +105,7 @@ void GcodeSuite::M81() {
#if HAS_SUICIDE #if HAS_SUICIDE
suicide(); suicide();
#elif ENABLED(PSU_CONTROL) #elif ENABLED(PSU_CONTROL)
PSU_OFF(); PSU_OFF_SOON();
#endif #endif
LCD_MESSAGEPGM_P(PSTR(MACHINE_NAME " " STR_OFF ".")); LCD_MESSAGEPGM_P(PSTR(MACHINE_NAME " " STR_OFF "."));

View File

@ -416,8 +416,13 @@
#endif #endif
#endif #endif
#if !defined(PSU_POWERUP_DELAY) && ENABLED(PSU_CONTROL) #if ENABLED(PSU_CONTROL)
#define PSU_POWERUP_DELAY 250 #ifndef PSU_POWERUP_DELAY
#define PSU_POWERUP_DELAY 250
#endif
#ifndef POWER_OFF_DELAY
#define POWER_OFF_DELAY 0
#endif
#endif #endif
/** /**

View File

@ -3016,9 +3016,9 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "PSU_CONTROL requires PSU_ACTIVE_STATE to be defined as 'HIGH' or 'LOW'." #error "PSU_CONTROL requires PSU_ACTIVE_STATE to be defined as 'HIGH' or 'LOW'."
#elif !PIN_EXISTS(PS_ON) #elif !PIN_EXISTS(PS_ON)
#error "PSU_CONTROL requires PS_ON_PIN." #error "PSU_CONTROL requires PS_ON_PIN."
#elif POWER_OFF_DELAY < 0
#error "POWER_OFF_DELAY must be a positive value."
#endif #endif
#elif ENABLED(AUTO_POWER_CONTROL)
#error "AUTO_POWER_CONTROL requires PSU_CONTROL."
#endif #endif
#if HAS_CUTTER #if HAS_CUTTER