diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index 24404c8555..ce7becf047 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -932,6 +932,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index 59f42da893..8aacd1fa1a 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index 4ac60c6e3f..4653910010 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -1022,6 +1022,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index f1cead72ab..8cfb91e579 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -919,6 +919,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index f0f67de4c1..3e7c40e88f 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index aff6919772..0fb4a82286 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index de92833969..e9198a70da 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index 9a86568a68..b4b486d19d 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -900,6 +900,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 201a04ebe2..dde324069f 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -898,6 +898,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 1a386a8b4b..4b800d8f5c 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -900,6 +900,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 58eacfddd4..6589a25033 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -911,6 +911,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index 3a9834faff..71ea04793a 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -922,6 +922,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 5b5885370a..c86eaa18eb 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -904,6 +904,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index 2cb789e80d..cea3412da5 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -931,6 +931,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h
index 9cda5a5210..7df048085f 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h
@@ -907,6 +907,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index b46051d343..ce1494e84d 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -894,6 +894,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index 4434d5b09d..295459fcc5 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -894,6 +894,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 9065551290..36af811cf7 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -918,6 +918,12 @@
 #define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index f9fc66e2d3..100da5e4ba 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -927,6 +927,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index aa3e1608f7..929ea47c1f 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index d9521fe21c..3e8389802f 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -919,6 +919,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 49065f85b0..a0af8ee708 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -918,6 +918,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index 9ad2cefbbd..35187d90ac 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 1abc4f83b1..e3d0b66654 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -924,6 +924,12 @@
 //#define AUTO_BED_LEVELING_UBL
 #define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index 4887deace9..8effde2169 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -932,6 +932,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index b85ecbea10..692eb1a82d 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -940,6 +940,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index b676c2b1a7..f84d120aad 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -911,6 +911,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index de59235b22..c3de82d3e5 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 #define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index 452b42ea7d..1aa1c6f0ba 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index ae8ffda0c4..7fd2cf7b51 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index 348f4b82a6..a4d3606033 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 4111793bc3..e00a92d60f 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -910,6 +910,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index fcc2e7b415..de211ff10e 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -924,6 +924,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 4617dcee23..85d857797b 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -915,6 +915,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index 538c600749..71e0363f55 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -943,6 +943,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 833715b1d9..3dbe58b366 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 77f2437ed2..a0d98b0126 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -968,6 +968,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index fe494ae707..6d2466444e 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -903,6 +903,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 465d717abc..2d8e21bf86 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index dee561d480..d305200fd6 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -923,6 +923,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 286baaf570..ca6ed17565 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -903,6 +903,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 5984775eb5..22e0789861 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -942,6 +942,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index a6303c8d74..8573366ac8 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index fb7a34cf5d..341dd1367b 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 2c900678f5..abd4c1a2fc 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -913,6 +913,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 6338967a3d..43bbb54d01 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 26ee3f8250..cbc546cff2 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1042,6 +1042,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index a15e885754..8abc72dc08 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1033,6 +1033,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 1a9ab7101a..51d0d64edb 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1042,6 +1042,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 0598a3a4d3..c79d6e8213 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1045,6 +1045,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index d10edb2768..5e3de46512 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -1029,6 +1029,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 537ee791b1..f44de6ee0b 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -1032,6 +1032,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 865505eb53..d429fa0013 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -1032,6 +1032,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index dd9ff1c651..a094fdc4ab 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -1041,6 +1041,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index ce18c8ab9c..ba34d31538 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -926,6 +926,12 @@
 #define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index c6242369a1..9e9c6596a4 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -915,6 +915,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index f89b6b002d..3de98375d2 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -913,6 +913,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index ac058e2d28..8c56396532 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -907,6 +907,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 7c433eaed1..f63a474ede 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -917,6 +917,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.