MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🐛 Fix G38 with probe on Z_MIN (#22452)

Browse Source
This commit is contained in:
Grayson 2021-07-31 22:55:22 -05:00 committed by Scott Lahteine
parent 4b2fdbeeb1
commit 1866f51d08
3 changed files with 19 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/inc/Conditionals_LCD.h
View File

@ -771,7 +771,7 @@
#endif #endif
/** /**
* Set flags for enabled probes * Set a flag for any type of bed probe, including the paper-test
*/ */
#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE) #if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
#define HAS_BED_PROBE 1 #define HAS_BED_PROBE 1
@ -913,7 +913,7 @@
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && !BOTH(DELTA, SENSORLESS_PROBING) #if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && !BOTH(DELTA, SENSORLESS_PROBING)
#define USES_Z_MIN_PROBE_PIN 1 #define USES_Z_MIN_PROBE_PIN 1
#endif #endif
#if Z_HOME_TO_MIN && (!USES_Z_MIN_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING)) #if Z_HOME_TO_MIN && TERN1(USES_Z_MIN_PROBE_PIN, ENABLED(USE_PROBE_FOR_Z_HOMING))
#define HOMING_Z_WITH_PROBE 1 #define HOMING_Z_WITH_PROBE 1
#endif #endif
#ifndef Z_PROBE_LOW_POINT #ifndef Z_PROBE_LOW_POINT

2
Marlin/src/inc/Conditionals_post.h
View File

@ -2533,7 +2533,7 @@
#if PIN_EXISTS(Z4_MAX) #if PIN_EXISTS(Z4_MAX)
#define HAS_Z4_MAX 1 #define HAS_Z4_MAX 1
#endif #endif
#if BOTH(HAS_BED_PROBE, USES_Z_MIN_PROBE_PIN) && PIN_EXISTS(Z_MIN_PROBE) #if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
#define HAS_Z_MIN_PROBE_PIN 1 #define HAS_Z_MIN_PROBE_PIN 1
#endif #endif

34
Marlin/src/module/endstops.cpp
View File

@ -596,14 +596,15 @@ void _O2 Endstops::report_states() {
// endstop ISR or the Stepper ISR. // endstop ISR or the Stepper ISR.
#if BOTH(DELTA, SENSORLESS_PROBING) #if BOTH(DELTA, SENSORLESS_PROBING)
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_MAX #define __ENDSTOP(AXIS, ...) AXIS ##_MAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_MAX_PIN #define _ENDSTOP_PIN(AXIS, ...) AXIS ##_MAX_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_MAX_ENDSTOP_INVERTING #define _ENDSTOP_INVERTING(AXIS, ...) AXIS ##_MAX_ENDSTOP_INVERTING
#else #else
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX #define __ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
#endif #endif
#define _ENDSTOP(AXIS, MINMAX) __ENDSTOP(AXIS, MINMAX)
// Check endstops - Could be called from Temperature ISR! // Check endstops - Could be called from Temperature ISR!
void Endstops::update() { void Endstops::update() {
@ -615,9 +616,10 @@ void Endstops::update() {
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX))) #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
#define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT)) #define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT))
#if BOTH(G38_PROBE_TARGET, HAS_Z_MIN_PROBE_PIN) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY) #if ENABLED(G38_PROBE_TARGET) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
// If G38 command is active check Z_MIN_PROBE for ALL movement #define HAS_G38_PROBE 1
if (G38_move) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); // For G38 moves check the probe's pin for ALL movement
if (G38_move) UPDATE_ENDSTOP_BIT(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN));
#endif #endif
// With Dual X, endstops are only checked in the homing direction for the active extruder // With Dual X, endstops are only checked in the homing direction for the active extruder
@ -746,7 +748,7 @@ void Endstops::update() {
COPY_LIVE_STATE(Z_MAX, Z4_MAX); COPY_LIVE_STATE(Z_MAX, Z4_MAX);
#endif #endif
#endif #endif
#elif !USES_Z_MIN_PROBE_PIN || Z_MAX_PIN != Z_MIN_PROBE_PIN #elif TERN1(USES_Z_MIN_PROBE_PIN, Z_MAX_PIN != Z_MIN_PROBE_PIN)
// If this pin isn't the bed probe it's the Z endstop // If this pin isn't the bed probe it's the Z endstop
UPDATE_ENDSTOP_BIT(Z, MAX); UPDATE_ENDSTOP_BIT(Z, MAX);
#endif #endif
@ -930,15 +932,11 @@ void Endstops::update() {
#define PROCESS_ENDSTOP_Z(MINMAX) PROCESS_DUAL_ENDSTOP(Z, MINMAX) #define PROCESS_ENDSTOP_Z(MINMAX) PROCESS_DUAL_ENDSTOP(Z, MINMAX)
#endif #endif
#if BOTH(G38_PROBE_TARGET, HAS_Z_MIN_PROBE_PIN) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY) #if HAS_G38_PROBE
#if ENABLED(G38_PROBE_AWAY) #define _G38_OPEN_STATE TERN(G38_PROBE_AWAY, (G38_move >= 4), LOW)
#define _G38_OPEN_STATE (G38_move >= 4) // For G38 moves check the probe's pin for ALL movement
#else if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN))) != _G38_OPEN_STATE) {
#define _G38_OPEN_STATE LOW if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, TERN(X_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(X_AXIS); }
#endif
// If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE)) != _G38_OPEN_STATE) {
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, TERN(X_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(X_AXIS); }
#if HAS_Y_AXIS #if HAS_Y_AXIS
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, TERN(Y_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(Y_AXIS); } else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, TERN(Y_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(Y_AXIS); }
#endif #endif
@ -1043,7 +1041,7 @@ void Endstops::update() {
#if HAS_Z_MAX || (Z_SPI_SENSORLESS && Z_HOME_TO_MAX) #if HAS_Z_MAX || (Z_SPI_SENSORLESS && Z_HOME_TO_MAX)
#if ENABLED(Z_MULTI_ENDSTOPS) #if ENABLED(Z_MULTI_ENDSTOPS)
PROCESS_ENDSTOP_Z(MAX); PROCESS_ENDSTOP_Z(MAX);
#elif !USES_Z_MIN_PROBE_PIN || Z_MAX_PIN != Z_MIN_PROBE_PIN // No probe or probe is Z_MIN || Probe is not Z_MAX #elif TERN1(USES_Z_MIN_PROBE_PIN, Z_MAX_PIN != Z_MIN_PROBE_PIN) // No probe or probe is Z_MIN || Probe is not Z_MAX
PROCESS_ENDSTOP(Z, MAX); PROCESS_ENDSTOP(Z, MAX);
#endif #endif
#if CORE_DIAG(XZ, X, MIN) #if CORE_DIAG(XZ, X, MIN)