Apply to the rest of the configs

Marlin/example_configurations/Felix/Configuration.h

@@ -507,6 +507,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -505,6 +505,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/Hephestos/Configuration.h

@@ -517,6 +517,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -519,6 +519,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/K8200/Configuration.h

@@ -542,6 +542,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -525,6 +525,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/RigidBot/Configuration.h

@@ -519,6 +519,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/SCARA/Configuration.h

@@ -533,6 +533,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/TAZ4/Configuration.h

@@ -546,6 +546,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/WITBOX/Configuration.h

@@ -517,6 +517,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -525,6 +525,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -567,6 +567,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/delta/generic/Configuration.h

@@ -567,6 +567,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -567,6 +567,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -556,6 +556,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -565,6 +565,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/makibox/Configuration.h

@@ -528,6 +528,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -515,6 +515,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+
   //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
 
   #if ENABLED(MANUAL_BED_LEVELING)