Fix Tramming Wizard behavior (#20796)

This commit is contained in:
zeleps 2021-01-17 07:08:48 +02:00 committed by GitHub
parent fb41413b76
commit 1b19eed195
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 14 additions and 6 deletions

View File

@ -23,6 +23,10 @@
#include "../../inc/MarlinConfigPre.h" #include "../../inc/MarlinConfigPre.h"
#if EITHER(RESTORE_LEVELING_AFTER_G28, ENABLE_LEVELING_AFTER_G28)
#define G28_L0_ENSURES_LEVELING_OFF 1
#endif
#if ENABLED(PROBE_MANUALLY) #if ENABLED(PROBE_MANUALLY)
extern bool g29_in_progress; extern bool g29_in_progress;
#else #else

View File

@ -241,7 +241,7 @@ void GcodeSuite::G28() {
// Disable the leveling matrix before homing // Disable the leveling matrix before homing
#if HAS_LEVELING #if HAS_LEVELING
IF_ENABLED(RESTORE_LEVELING_AFTER_G28, const bool leveling_restore_state = planner.leveling_active); const bool leveling_restore_state = parser.boolval('L', TERN(RESTORE_LEVELING_AFTER_G28, planner.leveling_active, ENABLED(ENABLE_LEVELING_AFTER_G28)));
IF_ENABLED(PROBE_MANUALLY, g29_in_progress = false); // Cancel the active G29 session IF_ENABLED(PROBE_MANUALLY, g29_in_progress = false); // Cancel the active G29 session
set_bed_leveling_enabled(false); set_bed_leveling_enabled(false);
#endif #endif
@ -440,8 +440,7 @@ void GcodeSuite::G28() {
do_blocking_move_to_z(delta_clip_start_height); do_blocking_move_to_z(delta_clip_start_height);
#endif #endif
IF_ENABLED(RESTORE_LEVELING_AFTER_G28, set_bed_leveling_enabled(leveling_restore_state)); TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_restore_state));
IF_ENABLED(ENABLE_LEVELING_AFTER_G28, set_bed_leveling_enabled(true));
restore_feedrate_and_scaling(); restore_feedrate_and_scaling();

View File

@ -42,6 +42,10 @@
float z_measured[G35_PROBE_COUNT] = { 0 }; float z_measured[G35_PROBE_COUNT] = { 0 };
static uint8_t tram_index = 0; static uint8_t tram_index = 0;
#if HAS_LEVELING
#include "../../feature/bedlevel/bedlevel.h"
#endif
static bool probe_single_point() { static bool probe_single_point() {
do_blocking_move_to_z(TERN(BLTOUCH, Z_CLEARANCE_DEPLOY_PROBE, Z_CLEARANCE_BETWEEN_PROBES)); do_blocking_move_to_z(TERN(BLTOUCH, Z_CLEARANCE_DEPLOY_PROBE, Z_CLEARANCE_BETWEEN_PROBES));
// Stow after each point with BLTouch "HIGH SPEED" mode for push-pin safety // Stow after each point with BLTouch "HIGH SPEED" mode for push-pin safety
@ -60,7 +64,7 @@ static void _menu_single_probe(const uint8_t point) {
STATIC_ITEM(MSG_LEVEL_CORNERS, SS_LEFT); STATIC_ITEM(MSG_LEVEL_CORNERS, SS_LEFT);
STATIC_ITEM(MSG_LAST_VALUE_SP, SS_LEFT, ftostr42_52(z_measured[0] - z_measured[point])); // Print diff STATIC_ITEM(MSG_LAST_VALUE_SP, SS_LEFT, ftostr42_52(z_measured[0] - z_measured[point])); // Print diff
ACTION_ITEM(MSG_UBL_BC_INSERT2, []{ if (probe_single_point()) ui.refresh(); }); ACTION_ITEM(MSG_UBL_BC_INSERT2, []{ if (probe_single_point()) ui.refresh(); });
ACTION_ITEM(MSG_BUTTON_DONE, []{ ui.goto_previous_screen_no_defer(); }); // Back ACTION_ITEM(MSG_BUTTON_DONE, []{ ui.goto_previous_screen(); }); // Back
END_MENU(); END_MENU();
} }
@ -88,7 +92,8 @@ void goto_tramming_wizard() {
// Inject G28, wait for homing to complete, // Inject G28, wait for homing to complete,
set_all_unhomed(); set_all_unhomed();
queue.inject_P(G28_STR); queue.inject_P(TERN(G28_L0_ENSURES_LEVELING_OFF, PSTR("G28L0"), G28_STR));
ui.goto_screen([]{ ui.goto_screen([]{
_lcd_draw_homing(); _lcd_draw_homing();
if (all_axes_homed()) if (all_axes_homed())

View File

@ -918,7 +918,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
DEBUG_ECHOLNPGM("No move (not homed)"); DEBUG_ECHOLNPGM("No move (not homed)");
} }
TERN_(HAS_LCD_MENU, if (!no_move) ui.return_to_status()); TERN_(HAS_LCD_MENU, if (!no_move) ui.update());
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
const bool idex_full_control = dual_x_carriage_mode == DXC_FULL_CONTROL_MODE; const bool idex_full_control = dual_x_carriage_mode == DXC_FULL_CONTROL_MODE;