Update Travis CI to match 1.1.x

As modified in #8395
This commit is contained in:
Scott Lahteine 2017-11-13 03:51:40 -06:00
parent 91baca6abb
commit 202a9b06d9

View File

@ -85,7 +85,7 @@ script:
# ...with AUTO_BED_LEVELING_LINEAR, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, and EEPROM_CHITCHAT
#
- restore_configs
- opt_enable Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
- opt_enable Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test a Servo Probe
@ -94,7 +94,7 @@ script:
- restore_configs
- opt_enable NUM_SERVOS Z_ENDSTOP_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
- opt_set NUM_SERVOS 1
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
- opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
@ -104,14 +104,25 @@ script:
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test PROBE_MANUALLY feature, with LCD support,
# Test MINIRAMBO for PWM_MOTOR_CURRENT
# PROBE_MANUALLY feature, with LCD support,
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
# Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
# ADVANCED_PAUSE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
#
- restore_configs
- opt_set MOTHERBOARD BOARD_MINIRAMBO
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
- opt_enable EEPROM_SETTINGS M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
- opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
- opt_set_adv I2C_SLAVE_ADDRESS 63
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
@ -164,34 +175,29 @@ script:
- opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test MINIRAMBO for PWM_MOTOR_CURRENT
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
# Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
# ADVANCED_PAUSE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
#
- restore_configs
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
- opt_set_adv I2C_SLAVE_ADDRESS 63
- opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
- pins_set RAMPS X_MAX_PIN -1
- opt_add_adv Z2_MAX_PIN 2
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Enable COREXY
#
- restore_configs
- opt_enable COREXY
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Enable COREYX (swapped)
#
#- restore_configs
#- opt_enable COREYX
#- build_marlin
# Test many less common options
#
- restore_configs
- opt_enable COREYX
- opt_set_adv FAN_MIN_PWM 50
- opt_set_adv FAN_KICKSTART_TIME 100
- opt_set_adv XY_FREQUENCY_LIMIT 15
- opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER
- opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
- opt_enable USE_XMAX_PLUG
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
######## Other Standard LCD/Panels ##############
#
@ -212,7 +218,7 @@ script:
#
#- restore_configs
#- opt_enable MAKRPANEL
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
#
@ -244,7 +250,7 @@ script:
# Cant find configuration details to get it to compile
#- restore_configs
#- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# RA_CONTROL_PANEL
#
@ -262,19 +268,19 @@ script:
#
#- restore_configs
#- opt_enable LCD_I2C_SAINSMART_YWROBOT
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# LCD_I2C_PANELOLU2
#
#- restore_configs
#- opt_enable LCD_I2C_PANELOLU2
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# LCD_I2C_VIKI
#
#- restore_configs
#- opt_enable LCD_I2C_VIKI
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# LCM1602
#
@ -288,18 +294,18 @@ script:
# BQ Hephestos 2
#- restore_configs
#- use_example_configs Hephestos_2
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
- use_example_configs delta/generic
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
#
- use_example_configs delta/generic
- opt_disable DISABLE_MIN_ENDSTOPS
- opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS OLED_PANEL_TINYBOY2
- opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Delta Config (FLSUN AC because it's complex)
@ -310,12 +316,12 @@ script:
# Makibox Config need to check board type for Teensy++ 2.0
#
#- use_example_configs makibox
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# SCARA with TMC2130
#
- use_example_configs SCARA
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS ULTIMAKERCONTROLLER
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
- opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
- opt_enable_adv AUTOMATIC_CURRENT_CONTROL STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
@ -323,7 +329,7 @@ script:
# tvrrug Config need to check board type for sanguino atmega644p
#
#- use_example_configs tvrrug/Round2
#- build_marlin
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
#
######## Board Types #############
@ -393,15 +399,6 @@ script:
- opt_set MIXING_STEPPERS 2
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test DUAL_X_CARRIAGE
#
#- restore_configs
#- opt_set EXTRUDERS 2
#- opt_set TEMP_SENSOR_1 1
#- opt_enable USE_XMAX_PLUG
#- opt_enable_adv DUAL_X_CARRIAGE
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test SWITCHING_EXTRUDER
#
- restore_configs