Create DEBUG_LEVELING_FEATURE

This commit is contained in:
Richard Wackerbarth 2015-08-05 06:40:36 -05:00
parent 194f98ff95
commit 20b4772155
4 changed files with 391 additions and 256 deletions

View File

@ -510,8 +510,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
// it is highly recommended you let this Z_SAFE_HOMING enabled!!! //If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area. #define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
// When defined, it will: // When defined, it will:

View File

@ -221,7 +221,8 @@ enum DebugFlags {
DEBUG_INFO = BIT(1), DEBUG_INFO = BIT(1),
DEBUG_ERRORS = BIT(2), DEBUG_ERRORS = BIT(2),
DEBUG_DRYRUN = BIT(3), DEBUG_DRYRUN = BIT(3),
DEBUG_COMMUNICATION = BIT(4) DEBUG_COMMUNICATION = BIT(4),
DEBUG_LEVELING = BIT(5)
}; };
extern uint8_t marlin_debug_flags; extern uint8_t marlin_debug_flags;

View File

@ -1033,7 +1033,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
#endif //DUAL_X_CARRIAGE #endif //DUAL_X_CARRIAGE
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
void print_xyz(const char *prefix, const float x, const float y, const float z) { void print_xyz(const char *prefix, const float x, const float y, const float z) {
SERIAL_ECHO(prefix); SERIAL_ECHO(prefix);
SERIAL_ECHOPAIR(": (", x); SERIAL_ECHOPAIR(": (", x);
@ -1112,10 +1112,12 @@ static void set_axis_is_at_home(AxisEnum axis) {
if (axis == Z_AXIS) current_position[Z_AXIS] -= zprobe_zoffset; if (axis == Z_AXIS) current_position[Z_AXIS] -= zprobe_zoffset;
#endif #endif
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("set_axis_is_at_home ", (unsigned long)axis); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOPAIR(" > (home_offset[axis]==", home_offset[axis]); SERIAL_ECHOPAIR("set_axis_is_at_home ", (unsigned long)axis);
print_xyz(") > current_position", current_position); SERIAL_ECHOPAIR(" > (home_offset[axis]==", home_offset[axis]);
print_xyz(") > current_position", current_position);
}
#endif #endif
} }
} }
@ -1162,8 +1164,10 @@ static void setup_for_endstop_move() {
saved_feedrate_multiplier = feedrate_multiplier; saved_feedrate_multiplier = feedrate_multiplier;
feedrate_multiplier = 100; feedrate_multiplier = 100;
refresh_cmd_timeout(); refresh_cmd_timeout();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
}
#endif #endif
enable_endstops(true); enable_endstops(true);
} }
@ -1175,8 +1179,10 @@ static void setup_for_endstop_move() {
* Calculate delta, start a line, and set current_position to destination * Calculate delta, start a line, and set current_position to destination
*/ */
void prepare_move_raw() { void prepare_move_raw() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("prepare_move_raw > destination", destination); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("prepare_move_raw > destination", destination);
}
#endif #endif
refresh_cmd_timeout(); refresh_cmd_timeout();
calculate_delta(destination); calculate_delta(destination);
@ -1205,8 +1211,10 @@ static void setup_for_endstop_move() {
current_position[Y_AXIS] = corrected_position.y; current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z; current_position[Z_AXIS] = corrected_position.z;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("set_bed_level_equation_lsq > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("set_bed_level_equation_lsq > current_position", current_position);
}
#endif #endif
sync_plan_position(); sync_plan_position();
@ -1238,8 +1246,10 @@ static void setup_for_endstop_move() {
current_position[Y_AXIS] = corrected_position.y; current_position[Y_AXIS] = corrected_position.y;
current_position[Z_AXIS] = corrected_position.z; current_position[Z_AXIS] = corrected_position.z;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("set_bed_level_equation_3pts > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("set_bed_level_equation_3pts > current_position", current_position);
}
#endif #endif
sync_plan_position(); sync_plan_position();
@ -1254,8 +1264,10 @@ static void setup_for_endstop_move() {
float start_z = current_position[Z_AXIS]; float start_z = current_position[Z_AXIS];
long start_steps = st_get_position(Z_AXIS); long start_steps = st_get_position(Z_AXIS);
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1"); SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1");
}
#endif #endif
// move down slowly until you find the bed // move down slowly until you find the bed
@ -1270,8 +1282,10 @@ static void setup_for_endstop_move() {
float mm = start_z - float(start_steps - stop_steps) / axis_steps_per_unit[Z_AXIS]; float mm = start_z - float(start_steps - stop_steps) / axis_steps_per_unit[Z_AXIS];
current_position[Z_AXIS] = mm; current_position[Z_AXIS] = mm;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("run_z_probe (DELTA) 2 > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("run_z_probe (DELTA) 2 > current_position", current_position);
}
#endif #endif
sync_plan_position_delta(); sync_plan_position_delta();
@ -1308,8 +1322,10 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = st_get_position_mm(Z_AXIS); current_position[Z_AXIS] = st_get_position_mm(Z_AXIS);
sync_plan_position(); sync_plan_position();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("run_z_probe > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("run_z_probe > current_position", current_position);
}
#endif #endif
#endif // !DELTA #endif // !DELTA
@ -1322,8 +1338,10 @@ static void setup_for_endstop_move() {
static void do_blocking_move_to(float x, float y, float z) { static void do_blocking_move_to(float x, float y, float z) {
float oldFeedRate = feedrate; float oldFeedRate = feedrate;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("do_blocking_move_to", x, y, z); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("do_blocking_move_to", x, y, z);
}
#endif #endif
#if ENABLED(DELTA) #if ENABLED(DELTA)
@ -1362,8 +1380,10 @@ static void setup_for_endstop_move() {
static void clean_up_after_endstop_move() { static void clean_up_after_endstop_move() {
#if ENABLED(ENDSTOPS_ONLY_FOR_HOMING) #if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
#if ENABLED(DEBUG_LEVELING) #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > enable_endstops(false)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > enable_endstops(false)");
}
#endif #endif
enable_endstops(false); enable_endstops(false);
#endif #endif
@ -1374,8 +1394,10 @@ static void setup_for_endstop_move() {
static void deploy_z_probe() { static void deploy_z_probe() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("deploy_z_probe > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("deploy_z_probe > current_position", current_position);
}
#endif #endif
#if HAS_SERVO_ENDSTOPS #if HAS_SERVO_ENDSTOPS
@ -1468,8 +1490,10 @@ static void setup_for_endstop_move() {
static void stow_z_probe(bool doRaise=true) { static void stow_z_probe(bool doRaise=true) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("stow_z_probe > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("stow_z_probe > current_position", current_position);
}
#endif #endif
#if HAS_SERVO_ENDSTOPS #if HAS_SERVO_ENDSTOPS
@ -1479,11 +1503,13 @@ static void setup_for_endstop_move() {
#if Z_RAISE_AFTER_PROBING > 0 #if Z_RAISE_AFTER_PROBING > 0
if (doRaise) { if (doRaise) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING);
SERIAL_ECHOPAIR("> SERVO_ENDSTOPS > do_blocking_move_to_z ", current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); SERIAL_EOL;
SERIAL_EOL; SERIAL_ECHOPAIR("> SERVO_ENDSTOPS > do_blocking_move_to_z ", current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING);
SERIAL_EOL;
}
#endif #endif
do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // this also updates current_position do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // this also updates current_position
st_synchronize(); st_synchronize();
@ -1574,35 +1600,43 @@ static void setup_for_endstop_move() {
// Probe bed height at position (x,y), returns the measured z value // Probe bed height at position (x,y), returns the measured z value
static float probe_pt(float x, float y, float z_before, ProbeAction probe_action=ProbeDeployAndStow, int verbose_level=1) { static float probe_pt(float x, float y, float z_before, ProbeAction probe_action=ProbeDeployAndStow, int verbose_level=1) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("probe_pt >>>"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action); SERIAL_ECHOLNPGM("probe_pt >>>");
SERIAL_EOL; SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
print_xyz("> current_position", current_position); SERIAL_EOL;
print_xyz("> current_position", current_position);
}
#endif #endif
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("Z Raise to z_before ", z_before); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("Z Raise to z_before ", z_before);
SERIAL_ECHOPAIR("> do_blocking_move_to_z ", z_before); SERIAL_EOL;
SERIAL_EOL; SERIAL_ECHOPAIR("> do_blocking_move_to_z ", z_before);
SERIAL_EOL;
}
#endif #endif
// Move Z up to the z_before height, then move the Z probe to the given XY // Move Z up to the z_before height, then move the Z probe to the given XY
do_blocking_move_to_z(z_before); // this also updates current_position do_blocking_move_to_z(z_before); // this also updates current_position
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("> do_blocking_move_to_xy ", x - X_PROBE_OFFSET_FROM_EXTRUDER); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOPAIR(", ", y - Y_PROBE_OFFSET_FROM_EXTRUDER); SERIAL_ECHOPAIR("> do_blocking_move_to_xy ", x - X_PROBE_OFFSET_FROM_EXTRUDER);
SERIAL_EOL; SERIAL_ECHOPAIR(", ", y - Y_PROBE_OFFSET_FROM_EXTRUDER);
SERIAL_EOL;
}
#endif #endif
do_blocking_move_to_xy(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER); // this also updates current_position do_blocking_move_to_xy(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER); // this also updates current_position
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY) #if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeDeploy) { if (probe_action & ProbeDeploy) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> ProbeDeploy"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> ProbeDeploy");
}
#endif #endif
deploy_z_probe(); deploy_z_probe();
} }
@ -1613,8 +1647,10 @@ static void setup_for_endstop_move() {
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY) #if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeStow) { if (probe_action & ProbeStow) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
}
#endif #endif
stow_z_probe(); stow_z_probe();
} }
@ -1630,8 +1666,10 @@ static void setup_for_endstop_move() {
SERIAL_EOL; SERIAL_EOL;
} }
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("<<< probe_pt"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("<<< probe_pt");
}
#endif #endif
return measured_z; return measured_z;
@ -1689,8 +1727,10 @@ static void setup_for_endstop_move() {
// Reset calibration results to zero. // Reset calibration results to zero.
void reset_bed_level() { void reset_bed_level() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("reset_bed_level"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("reset_bed_level");
}
#endif #endif
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) { for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) { for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
@ -1727,9 +1767,11 @@ static void setup_for_endstop_move() {
* offset[in] The additional distance to move to adjust docking location * offset[in] The additional distance to move to adjust docking location
*/ */
static void dock_sled(bool dock, int offset=0) { static void dock_sled(bool dock, int offset=0) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("dock_sled", dock); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("dock_sled", dock);
SERIAL_EOL;
}
#endif #endif
if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) { if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) {
LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN); LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN);
@ -1765,10 +1807,12 @@ static void setup_for_endstop_move() {
#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS) #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
static void homeaxis(AxisEnum axis) { static void homeaxis(AxisEnum axis) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_CHAR(')'); SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
SERIAL_EOL; SERIAL_CHAR(')');
SERIAL_EOL;
}
#endif #endif
#define HOMEAXIS_DO(LETTER) \ #define HOMEAXIS_DO(LETTER) \
((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1)) ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
@ -1822,8 +1866,10 @@ static void homeaxis(AxisEnum axis) {
current_position[axis] = 0; current_position[axis] = 0;
sync_plan_position(); sync_plan_position();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> enable_endstops(false)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
#endif #endif
enable_endstops(false); // Disable endstops while moving away enable_endstops(false); // Disable endstops while moving away
@ -1832,8 +1878,10 @@ static void homeaxis(AxisEnum axis) {
line_to_destination(); line_to_destination();
st_synchronize(); st_synchronize();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> enable_endstops(true)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
#endif #endif
enable_endstops(true); // Enable endstops for next homing move enable_endstops(true); // Enable endstops for next homing move
@ -1845,8 +1893,10 @@ static void homeaxis(AxisEnum axis) {
line_to_destination(); line_to_destination();
st_synchronize(); st_synchronize();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> TRIGGER ENDSTOP > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> TRIGGER ENDSTOP > current_position", current_position);
}
#endif #endif
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
@ -1877,27 +1927,35 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(DELTA) #if ENABLED(DELTA)
// retrace by the amount specified in endstop_adj // retrace by the amount specified in endstop_adj
if (endstop_adj[axis] * axis_home_dir < 0) { if (endstop_adj[axis] * axis_home_dir < 0) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> enable_endstops(false)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
#endif #endif
enable_endstops(false); // Disable endstops while moving away enable_endstops(false); // Disable endstops while moving away
sync_plan_position(); sync_plan_position();
destination[axis] = endstop_adj[axis]; destination[axis] = endstop_adj[axis];
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz(" > destination", destination); SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]);
print_xyz(" > destination", destination);
}
#endif #endif
line_to_destination(); line_to_destination();
st_synchronize(); st_synchronize();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> enable_endstops(true)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
#endif #endif
enable_endstops(true); // Enable endstops for next homing move enable_endstops(true); // Enable endstops for next homing move
} }
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
else { else {
SERIAL_ECHOPAIR("> endstop_adj * axis_home_dir = ", endstop_adj[axis] * axis_home_dir); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("> endstop_adj * axis_home_dir = ", endstop_adj[axis] * axis_home_dir);
SERIAL_EOL;
}
} }
#endif #endif
#endif #endif
@ -1906,8 +1964,10 @@ static void homeaxis(AxisEnum axis) {
set_axis_is_at_home(axis); set_axis_is_at_home(axis);
sync_plan_position(); sync_plan_position();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> AFTER set_axis_is_at_home > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> AFTER set_axis_is_at_home > current_position", current_position);
}
#endif #endif
destination[axis] = current_position[axis]; destination[axis] = current_position[axis];
@ -1927,8 +1987,10 @@ static void homeaxis(AxisEnum axis) {
// Deploy a Z probe if there is one, and homing towards the bed // Deploy a Z probe if there is one, and homing towards the bed
if (axis == Z_AXIS) { if (axis == Z_AXIS) {
if (axis_home_dir < 0) { if (axis_home_dir < 0) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> SERVO_LEVELING > stow_z_probe"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> SERVO_LEVELING > stow_z_probe");
}
#endif #endif
stow_z_probe(); stow_z_probe();
} }
@ -1941,8 +2003,10 @@ static void homeaxis(AxisEnum axis) {
#if HAS_SERVO_ENDSTOPS #if HAS_SERVO_ENDSTOPS
// Retract Servo endstop if enabled // Retract Servo endstop if enabled
if (servo_endstop_id[axis] >= 0) { if (servo_endstop_id[axis] >= 0) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
}
#endif #endif
servo[servo_endstop_id[axis]].move(servo_endstop_angle[axis][1]); servo[servo_endstop_id[axis]].move(servo_endstop_angle[axis][1]);
} }
@ -1951,10 +2015,12 @@ static void homeaxis(AxisEnum axis) {
} }
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_CHAR(')'); SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
SERIAL_EOL; SERIAL_CHAR(')');
SERIAL_EOL;
}
#endif #endif
} }
@ -2157,8 +2223,10 @@ inline void gcode_G4() {
*/ */
inline void gcode_G28() { inline void gcode_G28() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("gcode_G28 >>>"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("gcode_G28 >>>");
}
#endif #endif
// Wait for planner moves to finish! // Wait for planner moves to finish!
@ -2209,8 +2277,10 @@ inline void gcode_G28() {
sync_plan_position_delta(); sync_plan_position_delta();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("(DELTA) > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("(DELTA) > current_position", current_position);
}
#endif #endif
#else // NOT DELTA #else // NOT DELTA
@ -2226,8 +2296,10 @@ inline void gcode_G28() {
#if Z_HOME_DIR > 0 // If homing away from BED do Z first #if Z_HOME_DIR > 0 // If homing away from BED do Z first
HOMEAXIS(Z); HOMEAXIS(Z);
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> HOMEAXIS(Z) > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> HOMEAXIS(Z) > current_position", current_position);
}
#endif #endif
#elif DISABLED(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0 #elif DISABLED(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0
@ -2235,10 +2307,12 @@ inline void gcode_G28() {
// Raise Z before homing any other axes // Raise Z before homing any other axes
// (Does this need to be "negative home direction?" Why not just use Z_RAISE_BEFORE_HOMING?) // (Does this need to be "negative home direction?" Why not just use Z_RAISE_BEFORE_HOMING?)
destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS);
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
print_xyz("> (home_all_axis || homeZ) > destination", destination); SERIAL_EOL;
print_xyz("> (home_all_axis || homeZ) > destination", destination);
}
#endif #endif
feedrate = max_feedrate[Z_AXIS] * 60; feedrate = max_feedrate[Z_AXIS] * 60;
line_to_destination(); line_to_destination();
@ -2276,8 +2350,10 @@ inline void gcode_G28() {
set_axis_is_at_home(Y_AXIS); set_axis_is_at_home(Y_AXIS);
sync_plan_position(); sync_plan_position();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> QUICK_HOME > current_position 1", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> QUICK_HOME > current_position 1", current_position);
}
#endif #endif
destination[X_AXIS] = current_position[X_AXIS]; destination[X_AXIS] = current_position[X_AXIS];
@ -2293,8 +2369,10 @@ inline void gcode_G28() {
current_position[Z_AXIS] = destination[Z_AXIS]; current_position[Z_AXIS] = destination[Z_AXIS];
#endif #endif
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> QUICK_HOME > current_position 2", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> QUICK_HOME > current_position 2", current_position);
}
#endif #endif
} }
@ -2322,8 +2400,10 @@ inline void gcode_G28() {
#else #else
HOMEAXIS(X); HOMEAXIS(X);
#endif #endif
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> homeX", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> homeX", current_position);
}
#endif #endif
} }
@ -2331,8 +2411,10 @@ inline void gcode_G28() {
// Home Y // Home Y
if (home_all_axis || homeY) { if (home_all_axis || homeY) {
HOMEAXIS(Y); HOMEAXIS(Y);
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> homeY", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> homeY", current_position);
}
#endif #endif
} }
#endif #endif
@ -2344,8 +2426,10 @@ inline void gcode_G28() {
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>");
}
#endif #endif
if (home_all_axis) { if (home_all_axis) {
@ -2363,11 +2447,13 @@ inline void gcode_G28() {
destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed
feedrate = XY_TRAVEL_SPEED; feedrate = XY_TRAVEL_SPEED;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
print_xyz("> home_all_axis > current_position", current_position); SERIAL_EOL;
print_xyz("> home_all_axis > destination", destination); print_xyz("> home_all_axis > current_position", current_position);
print_xyz("> home_all_axis > destination", destination);
}
#endif #endif
// This could potentially move X, Y, Z all together // This could potentially move X, Y, Z all together
@ -2403,11 +2489,13 @@ inline void gcode_G28() {
destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS);
feedrate = max_feedrate[Z_AXIS] * 60; // feedrate (mm/m) = max_feedrate (mm/s) feedrate = max_feedrate[Z_AXIS] * 60; // feedrate (mm/m) = max_feedrate (mm/s)
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("Raise Z (before homing) by ", (float)Z_RAISE_BEFORE_HOMING);
print_xyz("> homeZ > current_position", current_position); SERIAL_EOL;
print_xyz("> homeZ > destination", destination); print_xyz("> homeZ > current_position", current_position);
print_xyz("> homeZ > destination", destination);
}
#endif #endif
line_to_destination(); line_to_destination();
@ -2430,8 +2518,10 @@ inline void gcode_G28() {
} // !home_all_axes && homeZ } // !home_all_axes && homeZ
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
}
#endif #endif
#else // !Z_SAFE_HOMING #else // !Z_SAFE_HOMING
@ -2440,8 +2530,10 @@ inline void gcode_G28() {
#endif // !Z_SAFE_HOMING #endif // !Z_SAFE_HOMING
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> (home_all_axis || homeZ) > final", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> (home_all_axis || homeZ) > final", current_position);
}
#endif #endif
} // home_all_axis || homeZ } // home_all_axis || homeZ
@ -2457,8 +2549,10 @@ inline void gcode_G28() {
#endif #endif
#if ENABLED(ENDSTOPS_ONLY_FOR_HOMING) #if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false)"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false)");
}
#endif #endif
enable_endstops(false); enable_endstops(false);
#endif #endif
@ -2475,8 +2569,10 @@ inline void gcode_G28() {
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
sync_plan_position(); sync_plan_position();
mbl.active = 1; mbl.active = 1;
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("mbl_was_active > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("mbl_was_active > current_position", current_position);
}
#endif #endif
} }
#endif #endif
@ -2486,8 +2582,10 @@ inline void gcode_G28() {
refresh_cmd_timeout(); refresh_cmd_timeout();
endstops_hit_on_purpose(); // clear endstop hit flags endstops_hit_on_purpose(); // clear endstop hit flags
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("<<< gcode_G28"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("<<< gcode_G28");
}
#endif #endif
} }
@ -2675,8 +2773,10 @@ inline void gcode_G28() {
*/ */
inline void gcode_G29() { inline void gcode_G29() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("gcode_G29 >>>"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("gcode_G29 >>>");
}
#endif #endif
// Don't allow auto-leveling without homing first // Don't allow auto-leveling without homing first
@ -2838,15 +2938,19 @@ inline void gcode_G28() {
z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING; z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING;
if (probePointCounter) { if (probePointCounter) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS])); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
SERIAL_EOL;
}
#endif #endif
} }
else { else {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING);
SERIAL_EOL;
}
#endif #endif
} }
@ -2887,8 +2991,10 @@ inline void gcode_G28() {
} //xProbe } //xProbe
} //yProbe } //yProbe
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> probing complete > current_position", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> probing complete > current_position", current_position);
}
#endif #endif
clean_up_after_endstop_move(); clean_up_after_endstop_move();
@ -2987,8 +3093,10 @@ inline void gcode_G28() {
#else // !AUTO_BED_LEVELING_GRID #else // !AUTO_BED_LEVELING_GRID
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("> 3-point Leveling"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("> 3-point Leveling");
}
#endif #endif
// Actions for each probe // Actions for each probe
@ -3020,11 +3128,13 @@ inline void gcode_G28() {
z_tmp = current_position[Z_AXIS], z_tmp = current_position[Z_AXIS],
real_z = st_get_position_mm(Z_AXIS); //get the real Z (since plan_get_position is now correcting the plane) real_z = st_get_position_mm(Z_AXIS); //get the real Z (since plan_get_position is now correcting the plane)
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > z_tmp = ", z_tmp); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > z_tmp = ", z_tmp);
SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > real_z = ", real_z); SERIAL_EOL;
SERIAL_EOL; SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > real_z = ", real_z);
SERIAL_EOL;
}
#endif #endif
apply_rotation_xyz(plan_bed_level_matrix, x_tmp, y_tmp, z_tmp); // Apply the correction sending the Z probe offset apply_rotation_xyz(plan_bed_level_matrix, x_tmp, y_tmp, z_tmp); // Apply the correction sending the Z probe offset
@ -3045,9 +3155,11 @@ inline void gcode_G28() {
// adjust for inaccurate endstops, not for reasonably accurate probes. If it were // adjust for inaccurate endstops, not for reasonably accurate probes. If it were
// added here, it could be seen as a compensating factor for the Z probe. // added here, it could be seen as a compensating factor for the Z probe.
// //
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("> AFTER apply_rotation_xyz > z_tmp = ", z_tmp); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("> AFTER apply_rotation_xyz > z_tmp = ", z_tmp);
SERIAL_EOL;
}
#endif #endif
current_position[Z_AXIS] = -zprobe_zoffset + (z_tmp - real_z) current_position[Z_AXIS] = -zprobe_zoffset + (z_tmp - real_z)
@ -3058,8 +3170,10 @@ inline void gcode_G28() {
// current_position[Z_AXIS] += home_offset[Z_AXIS]; // The Z probe determines Z=0, not "Z home" // current_position[Z_AXIS] += home_offset[Z_AXIS]; // The Z probe determines Z=0, not "Z home"
sync_plan_position(); sync_plan_position();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
print_xyz("> corrected Z in G29", current_position); if (marlin_debug_flags & DEBUG_LEVELING) {
print_xyz("> corrected Z in G29", current_position);
}
#endif #endif
} }
#endif // !DELTA #endif // !DELTA
@ -3071,16 +3185,20 @@ inline void gcode_G28() {
#endif #endif
#ifdef Z_PROBE_END_SCRIPT #ifdef Z_PROBE_END_SCRIPT
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHO("Z Probe End Script: "); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT); SERIAL_ECHO("Z Probe End Script: ");
SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
}
#endif #endif
enqueuecommands_P(PSTR(Z_PROBE_END_SCRIPT)); enqueuecommands_P(PSTR(Z_PROBE_END_SCRIPT));
st_synchronize(); st_synchronize();
#endif #endif
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("<<< gcode_G29"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("<<< gcode_G29");
}
#endif #endif
} }
@ -3891,6 +4009,12 @@ inline void gcode_M111() {
SERIAL_ECHOLNPGM(MSG_DEBUG_DRYRUN); SERIAL_ECHOLNPGM(MSG_DEBUG_DRYRUN);
disable_all_heaters(); disable_all_heaters();
} }
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_DEBUG_LEVELING);
}
#endif
} }
/** /**
@ -4377,22 +4501,28 @@ inline void gcode_M206() {
* M666: Set delta endstop adjustment * M666: Set delta endstop adjustment
*/ */
inline void gcode_M666() { inline void gcode_M666() {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM(">>> gcode_M666"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM(">>> gcode_M666");
}
#endif #endif
for (int8_t i = X_AXIS; i <= Z_AXIS; i++) { for (int8_t i = X_AXIS; i <= Z_AXIS; i++) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
endstop_adj[i] = code_value(); endstop_adj[i] = code_value();
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPGM("endstop_adj["); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHO(axis_codes[i]); SERIAL_ECHOPGM("endstop_adj[");
SERIAL_ECHOPAIR("] = ", endstop_adj[i]); SERIAL_ECHO(axis_codes[i]);
SERIAL_EOL; SERIAL_ECHOPAIR("] = ", endstop_adj[i]);
SERIAL_EOL;
}
#endif #endif
} }
} }
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOLNPGM("<<< gcode_M666"); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_ECHOLNPGM("<<< gcode_M666");
}
#endif #endif
} }
#elif ENABLED(Z_DUAL_ENDSTOPS) // !DELTA && ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS) // !DELTA && ENABLED(Z_DUAL_ENDSTOPS)
@ -6096,9 +6226,11 @@ void clamp_to_software_endstops(float target[3]) {
#if ENABLED(AUTO_BED_LEVELING_FEATURE) #if ENABLED(AUTO_BED_LEVELING_FEATURE)
if (zprobe_zoffset < 0) negative_z_offset += zprobe_zoffset; if (zprobe_zoffset < 0) negative_z_offset += zprobe_zoffset;
if (home_offset[Z_AXIS] < 0) { if (home_offset[Z_AXIS] < 0) {
#ifdef DEBUG_LEVELING #if ENABLED(DEBUG_LEVELING_FEATURE)
SERIAL_ECHOPAIR("> clamp_to_software_endstops > Add home_offset[Z_AXIS]:", home_offset[Z_AXIS]); if (marlin_debug_flags & DEBUG_LEVELING) {
SERIAL_EOL; SERIAL_ECHOPAIR("> clamp_to_software_endstops > Add home_offset[Z_AXIS]:", home_offset[Z_AXIS]);
SERIAL_EOL;
}
#endif #endif
negative_z_offset += home_offset[Z_AXIS]; negative_z_offset += home_offset[Z_AXIS];
} }

View File

@ -214,6 +214,7 @@
#define MSG_DEBUG_INFO "DEBUG INFO ENABLED" #define MSG_DEBUG_INFO "DEBUG INFO ENABLED"
#define MSG_DEBUG_ERRORS "DEBUG ERRORS ENABLED" #define MSG_DEBUG_ERRORS "DEBUG ERRORS ENABLED"
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED" #define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
#define MSG_DEBUG_LEVELING "DEBUG LEVELING ENABLED"
// LCD Menu Messages // LCD Menu Messages