diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 3c75cec830..69a9fbabeb 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index 3c75cec830..69a9fbabeb 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index d80eeacc4d..5aee80de6d 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -773,9 +773,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -870,6 +867,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index cae8a95653..2126c8d762 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration.h b/Marlin/src/config/examples/Anet/A2/Configuration.h
index ac4b314dd9..b6e4517a4e 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration.h
@@ -736,9 +736,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -833,6 +830,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration.h b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
index f074ffcb73..a07715960f 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
@@ -736,9 +736,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -833,6 +830,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index 7b242191cb..4a7828fc9c 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -801,9 +801,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -927,6 +924,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 96bf06b880..fbf041fba9 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -760,9 +760,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -857,6 +854,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index 9bba047071..cd1a37942f 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index bfae318923..fa2a43a979 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -725,9 +725,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -822,6 +819,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index 0555de8366..34ed06b659 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -725,9 +725,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -822,6 +819,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index 8e080fa225..da9b84605e 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -741,9 +741,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -838,6 +835,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 2456cdaedc..0a38aeb8ed 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -754,9 +754,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -851,6 +848,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 8107d07a6d..93de75d989 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -741,9 +741,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -838,6 +835,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index d5b8d71970..112c03410b 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -752,9 +752,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -849,6 +846,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index 744149b3cd..4cb4ed14ff 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -763,9 +763,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -860,6 +857,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 6c5bf263b3..607b2fb710 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index f4205889bf..3509c4ef33 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -772,9 +772,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -869,6 +866,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index c5f9ad1ff9..de29ed5ed6 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -763,9 +763,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -860,6 +857,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index 539e7416c5..95552b799e 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index 343821f5e4..610286c8d2 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 7d3203a123..aedc7791ac 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -763,9 +763,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -860,6 +857,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h
index 9201f12070..6305196f20 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration.h
@@ -764,9 +764,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -860,6 +857,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index f27a79283a..836c90aeb7 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -735,9 +735,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -832,6 +829,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index a103b89020..95bf0b2cac 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -735,9 +735,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -832,6 +829,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 7a328d6438..0613503e93 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -759,9 +759,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -856,6 +853,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
index 7a9eab6251..25f78eeb43 100644
--- a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
@@ -777,9 +777,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -874,6 +871,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
index d76f21a558..e286d6fb8b 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -788,9 +788,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -885,6 +882,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index 3fea05f533..f4569a30bf 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -768,9 +768,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -865,6 +862,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index d80622187c..e6426ac1a4 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 0dc5e6ffb4..b369f532f0 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -769,9 +769,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -866,6 +863,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 8e94144f32..216e364ace 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -768,9 +768,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -865,6 +862,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index b3a6d7fbfc..884c32d392 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 75464b256a..ea66f1453b 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index be758200f5..4f415c0f7b 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 21c563aca7..1454982ea7 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -765,9 +765,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -862,6 +859,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index e0274af936..f8173fd605 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -773,9 +773,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -870,6 +867,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 7a92219108..4b05d5805b 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -745,9 +745,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -846,6 +843,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 1bbe362271..f6639f556e 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -752,9 +752,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -849,6 +846,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 34f8dd0105..2c0c865490 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index fc2e534766..a17b718cdb 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -757,9 +757,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -854,6 +851,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index 64ade7e894..399bd97d28 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index 6e30024247..51aad4974f 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -793,9 +793,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -890,6 +887,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index d589ea9b96..ed2dfc18e0 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index b47cd148a3..c009282d32 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -751,9 +751,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -848,6 +845,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index cec57a34b7..deab5aafd4 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -766,9 +766,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -863,6 +860,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index bf5d3d5fd0..add74ac0d5 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -755,9 +755,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -852,6 +849,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index f8d7f7232f..ed77a670dd 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index c3abf9090d..9065b18d1f 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -784,9 +784,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -881,6 +878,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 6073566a93..c2d8a7f139 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index ac75523091..546284f984 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -804,9 +804,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -901,6 +898,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index aee8ebe297..d40992d21f 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
index 33f71f6d3e..24bebb7f2e 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 5b81ac7d1d..f9f39425e6 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 9d153ffad4..f651cb2ef1 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -764,9 +764,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -861,6 +858,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 03241a40cb..c9e2e1adde 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index aa4ccadae2..63583913fd 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -782,9 +782,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -879,6 +876,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index d10e4b6ca2..fbc29c46a7 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 3755f9be6b..0b5a76cec7 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 634c122f9b..c7275b3226 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -763,9 +763,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -860,6 +857,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 9acd73970c..9fe7566f41 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -753,9 +753,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -850,6 +847,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
index befadcb0d7..dc9935b803 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -875,9 +875,6 @@
  */
 #if ANYCUBIC_PROBE_VERSION > 0
   #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  #define MANUAL_DEPLOY_STOW
-#endif
 #endif
 
 /**
@@ -1025,6 +1022,9 @@
   #define Z_MIN_PROBE_REPEATABILITY_TEST
 #endif
 
+// Before deploy/stow pause for user confirmation
+#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 38726e6998..585ab81fdd 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -835,9 +835,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -978,6 +975,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index 6521fe6e2b..16db506bee 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -835,9 +835,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -977,6 +974,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 643a078a08..52d4ebd3b4 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -835,9 +835,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -977,6 +974,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index d5d9fe4dc5..5fe0409e72 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -840,9 +840,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -980,6 +977,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index c41f4dc1ba..4d69279fad 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -825,9 +825,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -965,6 +962,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 919f0eb5cf..6e584e2b59 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -825,9 +825,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -967,6 +964,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index d6123a75de..f042c7890d 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -818,9 +818,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -968,6 +965,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index c334972792..4d61833c08 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -828,9 +828,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -968,6 +965,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 176c1da98f..fe6469e375 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -766,9 +766,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -863,6 +860,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index 5266f7ac02..094ab1e4ee 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -756,9 +756,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -853,6 +850,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 49fb96b574..6a0bbd45da 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -755,9 +755,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -852,6 +849,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index c2830ad1e7..880b08a345 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -748,9 +748,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -845,6 +842,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index e748c5b8d3..1b977a2f2f 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -758,9 +758,6 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
-#if ENABLED(FIX_MOUNTED_PROBE)
-  //#define MANUAL_DEPLOY_STOW
-#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
@@ -855,6 +852,9 @@
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
 
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
 /**
  * Enable one or more of the following if probing seems unreliable.
  * Heaters and/or fans can be disabled during probing to minimize electrical
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 29330de230..87f4b3b205 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -379,8 +379,8 @@ bool set_probe_deployed(const bool deploy) {
 
   // Make room for probe to deploy (or stow)
   // Fix-mounted probe should only raise for deploy
-  // unless MANUAL_DEPLOY_STOW is enabled
-  #if ENABLED(FIX_MOUNTED_PROBE) && DISABLED(MANUAL_DEPLOY_STOW)
+  // unless PAUSE_BEFORE_DEPLOY_STOW is enabled
+  #if ENABLED(FIX_MOUNTED_PROBE) && DISABLED(PAUSE_BEFORE_DEPLOY_STOW)
     const bool deploy_stow_condition = deploy;
   #else
     constexpr bool deploy_stow_condition = true;
@@ -425,6 +425,24 @@ bool set_probe_deployed(const bool deploy) {
                                                    // otherwise an Allen-Key probe can't be stowed.
   #endif
 
+      #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
+
+        BUZZ(100, 659);
+        BUZZ(100, 698);
+
+        const char * const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
+        lcd_setalertstatusPGM(ds_str);
+        serialprintPGM(ds_str);
+        SERIAL_EOL();
+
+        KEEPALIVE_STATE(PAUSED_FOR_USER);
+        wait_for_user = true;
+        while (wait_for_user) idle();
+        lcd_reset_status();
+        KEEPALIVE_STATE(IN_HANDLER);
+
+      #endif // PAUSE_BEFORE_DEPLOY_STOW
+
       #if ENABLED(SOLENOID_PROBE)
 
         #if HAS_SOLENOID_1
@@ -443,24 +461,6 @@ bool set_probe_deployed(const bool deploy) {
 
         deploy ? run_deploy_moves_script() : run_stow_moves_script();
 
-      #elif ENABLED(MANUAL_DEPLOY_STOW)
-
-        do_probe_raise(Z_CLEARANCE_DEPLOY_PROBE);
-
-        BUZZ(100, 659);
-        BUZZ(100, 698);
-
-        const char * const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
-        lcd_setalertstatusPGM(ds_str);
-        serialprintPGM(ds_str);
-        SERIAL_EOL();
-
-        KEEPALIVE_STATE(PAUSED_FOR_USER);
-        wait_for_user = true;
-        while (wait_for_user) idle();
-        lcd_reset_status();
-        KEEPALIVE_STATE(IN_HANDLER);
-
       #endif
 
   #ifdef _TRIGGERED_WHEN_STOWED_TEST
diff --git a/buildroot/share/tests/megaatmega2560_tests b/buildroot/share/tests/megaatmega2560_tests
index 014dd6a4a6..1d7c484593 100755
--- a/buildroot/share/tests/megaatmega2560_tests
+++ b/buildroot/share/tests/megaatmega2560_tests
@@ -291,7 +291,7 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
 # SCARA with TMC2130
 #
 use_example_configs SCARA
-opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE MANUAL_DEPLOY_STOW USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
+opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE PAUSE_BEFORE_DEPLOY_STOW USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
 opt_set X_DRIVER_TYPE TMC2130
 opt_set Y_DRIVER_TYPE TMC2130
 opt_set Z_DRIVER_TYPE TMC2130