Merge pull request #6633 from thinkyhead/bf_temp_units

Minor patches and cleanup
This commit is contained in:
Scott Lahteine 2017-05-07 21:56:52 -05:00 committed by GitHub
commit 232e8682d1
33 changed files with 123 additions and 99 deletions

View File

@ -474,14 +474,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
@ -489,7 +489,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

View File

@ -1298,19 +1298,30 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() >
#if ENABLED(TEMPERATURE_UNITS_SUPPORT) #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
inline void set_input_temp_units(TempUnit units) { input_temp_units = units; } inline void set_input_temp_units(TempUnit units) { input_temp_units = units; }
float temp_abs(const float &c) { float to_temp_units(const float &c) {
switch (input_temp_units) { switch (input_temp_units) {
case TEMPUNIT_F: case TEMPUNIT_F:
return (c - 32.0) * 0.5555555556; return c * 0.5555555556 + 32.0;
case TEMPUNIT_K: case TEMPUNIT_K:
return c - 273.15; return c + 273.15;
case TEMPUNIT_C: case TEMPUNIT_C:
default: default:
return c; return c;
} }
} }
int16_t code_value_temp_abs() { return temp_abs(code_value_float()); } int16_t code_value_temp_abs() {
const float c = code_value_float();
switch (input_temp_units) {
case TEMPUNIT_F:
return (int16_t)((c - 32.0) * 0.5555555556);
case TEMPUNIT_K:
return (int16_t)(c - 273.15);
case TEMPUNIT_C:
default:
return (int16_t)(c);
}
}
int16_t code_value_temp_diff() { int16_t code_value_temp_diff() {
switch (input_temp_units) { switch (input_temp_units) {

View File

@ -1257,8 +1257,8 @@ void MarlinSettings::reset() {
CONFIG_ECHO_START; CONFIG_ECHO_START;
#if ENABLED(TEMPERATURE_UNITS_SUPPORT) #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
extern TempUnit input_temp_units; extern TempUnit input_temp_units;
extern float temp_abs(const float &f); extern float to_temp_units(const float &f);
#define TEMP_UNIT(N) temp_abs(N) #define TEMP_UNIT(N) to_temp_units(N)
SERIAL_ECHOPGM(" M149 "); SERIAL_ECHOPGM(" M149 ");
SERIAL_CHAR(input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C'); SERIAL_CHAR(input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C');
SERIAL_ECHOPGM(" ; Units in "); SERIAL_ECHOPGM(" ; Units in ");

View File

@ -473,14 +473,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 }
@ -488,7 +488,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 }

View File

@ -457,14 +457,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
@ -472,7 +472,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 }

View File

@ -457,14 +457,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
@ -472,7 +472,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 }

View File

@ -480,14 +480,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 } #define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 }
@ -495,7 +495,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 }

View File

@ -465,14 +465,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 }
@ -480,7 +480,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 }
@ -1149,7 +1149,7 @@
* IMPORTANT: The U8glib library is required for Full Graphic Display! * IMPORTANT: The U8glib library is required for Full Graphic Display!
* https://github.com/olikraus/U8glib_Arduino * https://github.com/olikraus/U8glib_Arduino
*/ */
#define ULTRA_LCD // Character based //#define ULTRA_LCD // Character based
//#define DOGLCD // Full graphics display //#define DOGLCD // Full graphics display
/** /**

View File

@ -468,14 +468,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 204 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 204 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 200 } #define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 200 }
@ -483,7 +483,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 800, 800, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 800, 800, 20, 1000 }

View File

@ -504,13 +504,13 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
@ -518,7 +518,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

View File

@ -474,14 +474,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 }
@ -489,7 +489,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }
@ -1158,7 +1158,7 @@
* IMPORTANT: The U8glib library is required for Full Graphic Display! * IMPORTANT: The U8glib library is required for Full Graphic Display!
* https://github.com/olikraus/U8glib_Arduino * https://github.com/olikraus/U8glib_Arduino
*/ */
#define ULTRA_LCD // Character based //#define ULTRA_LCD // Character based
//#define DOGLCD // Full graphics display //#define DOGLCD // Full graphics display
/** /**

View File

@ -474,14 +474,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } #define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 }
@ -489,7 +489,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

View File

@ -474,14 +474,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
@ -489,7 +489,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

View File

@ -471,7 +471,7 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
// default steps per unit for RigidBot with standard hardware // default steps per unit for RigidBot with standard hardware
#define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 }
@ -480,7 +480,7 @@
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
@ -488,7 +488,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 }

View File

@ -489,14 +489,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA #define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 }
@ -504,7 +504,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 }

View File

@ -494,14 +494,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } #define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 }
@ -509,7 +509,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

View File

@ -525,14 +525,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 }
@ -540,7 +540,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

View File

@ -465,14 +465,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } #define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 }
@ -480,7 +480,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 }

View File

@ -474,14 +474,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
@ -489,7 +489,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }

View File

@ -542,14 +542,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 100 } // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 100 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 }
@ -557,7 +557,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 }

View File

@ -549,14 +549,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 90 } // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 90 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 }
@ -564,7 +564,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 }

View File

@ -538,14 +538,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 }
@ -553,7 +553,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

View File

@ -538,14 +538,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 }
@ -553,7 +553,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

View File

@ -532,14 +532,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 } #define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 }
@ -547,7 +547,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 }

View File

@ -551,14 +551,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158 } // default steps per unit for PowerWasp #define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158 } // default steps per unit for PowerWasp
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 }
@ -566,7 +566,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }

View File

@ -488,14 +488,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 }
@ -503,7 +503,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 } #define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 }

View File

@ -477,14 +477,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** #define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 *****
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } #define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 }
@ -492,7 +492,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 }

View File

@ -464,7 +464,7 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR
@ -475,7 +475,7 @@
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR
@ -483,7 +483,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }

View File

@ -479,14 +479,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 } #define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 }
@ -494,7 +494,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 } #define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 }

View File

@ -136,16 +136,16 @@
void unified_bed_leveling::display_map(const int map_type) { void unified_bed_leveling::display_map(const int map_type) {
const bool map0 = map_type == 0; const bool map0 = map_type == 0;
const uint8_t spaces = 11; constexpr uint8_t spaces = 11 * (GRID_MAX_POINTS_X - 2);
if (map0) { if (map0) {
SERIAL_PROTOCOLLNPGM("\nBed Topography Report:\n"); SERIAL_PROTOCOLLNPGM("\nBed Topography Report:\n");
serial_echo_xy(0, GRID_MAX_POINTS_Y - 1); serial_echo_xy(0, GRID_MAX_POINTS_Y - 1);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 3); SERIAL_ECHO_SP(spaces + 3);
serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1); serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1);
SERIAL_EOL; SERIAL_EOL;
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y); serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2)-3); SERIAL_ECHO_SP(spaces - 3);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y); serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y);
SERIAL_EOL; SERIAL_EOL;
} }
@ -190,11 +190,11 @@
if (map0) { if (map0) {
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y); serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 1); SERIAL_ECHO_SP(spaces + 1);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y); serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y);
SERIAL_EOL; SERIAL_EOL;
serial_echo_xy(0, 0); serial_echo_xy(0, 0);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 5); SERIAL_ECHO_SP(spaces + 5);
serial_echo_xy(GRID_MAX_POINTS_X - 1, 0); serial_echo_xy(GRID_MAX_POINTS_X - 1, 0);
SERIAL_EOL; SERIAL_EOL;
} }

View File

@ -389,8 +389,8 @@
} }
if (code_seen('P')) { if (code_seen('P')) {
if (WITHIN(phase_value,0,1) && ubl.state.eeprom_storage_slot==-1) { if (WITHIN(phase_value, 0, 1) && ubl.state.eeprom_storage_slot == -1) {
ubl.state.eeprom_storage_slot=0; ubl.state.eeprom_storage_slot = 0;
SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.\n"); SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.\n");
} }

View File

@ -37,7 +37,7 @@ opensite() {
echo "Previewing MarlinDocumentation..." echo "Previewing MarlinDocumentation..."
# wait to open the url for about 8s # wait to open the url for about 8s
( sleep 8; opensite ) & ( sleep 45; opensite ) &
bundle exec jekyll serve --watch --incremental bundle exec jekyll serve --watch --incremental

View File

@ -8,6 +8,10 @@
MFINFO=$(mfinfo) || exit MFINFO=$(mfinfo) || exit
IFS=' ' read -a INFO <<< "$MFINFO" IFS=' ' read -a INFO <<< "$MFINFO"
if [[ ${INFO[4]} == "(no" ]]; then
echo "Branch is unavailable!" ; exit 1
fi
case "$#" in case "$#" in
0 ) ;; 0 ) ;;
* ) echo "Usage: `basename $0`" 1>&2 ; exit 1 ;; * ) echo "Usage: `basename $0`" 1>&2 ; exit 1 ;;
@ -15,5 +19,14 @@ esac
git add * .travis.yml git add * .travis.yml
git commit -m "patch" git commit -m "patch"
mfrb
git push -f if [[ ${INFO[3]} == ${INFO[4]} ]]; then
if [[ ${INFO[2]} == "MarlinDocumentation" ]]; then
git rebase -i HEAD~2
else
echo "Don't alter the PR target branch."; exit 1
fi
else
mfrb
git push -f
fi