Move Allen Key probe definition to the top

This commit is contained in:
Scott Lahteine 2017-03-06 19:59:42 -06:00
parent 77cf648ed3
commit 27b5666e15
25 changed files with 100 additions and 80 deletions

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -546,6 +546,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -576,10 +580,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -546,6 +546,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -576,10 +580,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -555,6 +555,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -585,10 +589,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -557,6 +557,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -587,10 +591,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -592,6 +592,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -622,10 +626,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -562,6 +562,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -592,10 +596,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -565,6 +565,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -595,10 +599,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -564,6 +564,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -594,10 +598,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -578,6 +578,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -608,10 +612,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -584,6 +584,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -614,10 +618,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -555,6 +555,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -585,10 +589,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -563,6 +563,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -593,10 +597,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -621,6 +621,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //

View File

@ -608,6 +608,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //

View File

@ -608,6 +608,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //

View File

@ -602,6 +602,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //

View File

@ -621,6 +621,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //

View File

@ -566,6 +566,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -596,10 +600,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.

View File

@ -559,6 +559,10 @@
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0). // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers. // X and Y offsets must be integers.
// //
@ -589,10 +593,6 @@
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! *** // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// //
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING. // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.