From 2afb7bd4cfa130d57dcbca657fa9a81eecbc7a15 Mon Sep 17 00:00:00 2001 From: Bernhard Kubicek Date: Sun, 6 Nov 2011 14:03:41 +0100 Subject: [PATCH] refactured temperature.cpp so that there are now abstract functions to access temperatures. --- Marlin/Configuration.h | 3 +- Marlin/Marlin.pde | 106 ++++++++++------------------- Marlin/temperature.cpp | 57 +++++++++++----- Marlin/temperature.h | 100 ++++++++++++++++++++++----- Marlin/ultralcd.pde | 150 +++++++++++++++++++++-------------------- 5 files changed, 237 insertions(+), 179 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 65c4f32a3c..8ad0e22829 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -157,6 +157,7 @@ const int dropsegments=5; //everything with this number of steps will be ignore //// Experimental watchdog and minimal temp // The watchdog waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature // If the temperature has not increased at the end of that period, the target temperature is set to zero. It can be reset with another M104/M109 +/// CURRENTLY NOT IMPLEMENTED AND UNUSEABLE //#define WATCHPERIOD 5000 //5 seconds // Actual temperature must be close to target for this long before M109 returns success @@ -245,4 +246,4 @@ const int dropsegments=5; //everything with this number of steps will be ignore #endif -#endif +#endif diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde index 92907a2d24..698b137803 100644 --- a/Marlin/Marlin.pde +++ b/Marlin/Marlin.pde @@ -150,10 +150,7 @@ extern float HeaterPower; const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42 float tt = 0, bt = 0; -#ifdef WATCHPERIOD -int watch_raw = -1000; -unsigned long watchmillis = 0; -#endif //WATCHPERIOD + //Inactivity shutdown variables unsigned long previous_millis_cmd = 0; @@ -817,28 +814,18 @@ inline void process_commands() } break; case 104: // M104 - if (code_seen('S')) target_raw[TEMPSENSOR_HOTEND_0] = temp2analog(code_value()); -#ifdef PIDTEMP - pid_setpoint = code_value(); -#endif //PIDTEM - #ifdef WATCHPERIOD - if(target_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0]){ - watchmillis = max(1,millis()); - watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; - }else{ - watchmillis = 0; - } - #endif + if (code_seen('S')) setTargetHotend0(code_value()); + setWatch(); break; case 140: // M140 set bed temp - if (code_seen('S')) target_raw[TEMPSENSOR_BED] = temp2analogBed(code_value()); + if (code_seen('S')) setTargetBed(code_value()); break; case 105: // M105 #if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595) - tt = analog2temp(current_raw[TEMPSENSOR_HOTEND_0]); + tt = degHotend0(); #endif #if TEMP_1_PIN > -1 - bt = analog2tempBed(current_raw[TEMPSENSOR_BED]); + bt = degBed(); #endif #if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595) Serial.print("ok T:"); @@ -866,36 +853,27 @@ inline void process_commands() //break; case 109: {// M109 - Wait for extruder heater to reach target. LCD_MESSAGE("Heating..."); - if (code_seen('S')) target_raw[TEMPSENSOR_HOTEND_0] = temp2analog(code_value()); - #ifdef PIDTEMP - pid_setpoint = code_value(); - #endif //PIDTEM - #ifdef WATCHPERIOD - if(target_raw[TEMPSENSOR_HOTEND_0]>current_raw[TEMPSENSOR_HOTEND_0]){ - watchmillis = max(1,millis()); - watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; - } else { - watchmillis = 0; - } - #endif //WATCHPERIOD + if (code_seen('S')) setTargetHotend0(code_value()); + + setWatch(); codenum = millis(); /* See if we are heating up or cooling down */ - bool target_direction = (current_raw[TEMPSENSOR_HOTEND_0] < target_raw[TEMPSENSOR_HOTEND_0]); // true if heating, false if cooling + bool target_direction = isHeatingHotend0(); // true if heating, false if cooling #ifdef TEMP_RESIDENCY_TIME long residencyStart; residencyStart = -1; /* continue to loop until we have reached the target temp _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */ - while((target_direction ? (current_raw[TEMPSENSOR_HOTEND_0] < target_raw[TEMPSENSOR_HOTEND_0]) : (current_raw[TEMPSENSOR_HOTEND_0] > target_raw[TEMPSENSOR_HOTEND_0])) || + while((target_direction ? (isHeatingHotend0()) : (isCoolingHotend0()) || (residencyStart > -1 && (millis() - residencyStart) < TEMP_RESIDENCY_TIME*1000) ) { #else - while ( target_direction ? (current_raw[TEMPSENSOR_HOTEND_0] < target_raw[TEMPSENSOR_HOTEND_0]) : (current_raw[TEMPSENSOR_HOTEND_0] > target_raw[TEMPSENSOR_HOTEND_0]) ) { + while ( target_direction ? (isHeatingHotend0()) : (isCoolingHotend0()) ) { #endif //TEMP_RESIDENCY_TIME if( (millis() - codenum) > 1000 ) { //Print Temp Reading every 1 second while heating up/cooling down Serial.print("T:"); - Serial.println( analog2temp(current_raw[TEMPSENSOR_HOTEND_0]) ); + Serial.println( degHotend0() ); codenum = millis(); } manage_heater(); @@ -903,9 +881,9 @@ inline void process_commands() #ifdef TEMP_RESIDENCY_TIME /* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time or when current temp falls outside the hysteresis after target temp was reached */ - if ((residencyStart == -1 && target_direction && current_raw[TEMPSENSOR_HOTEND_0] >= target_raw[TEMPSENSOR_HOTEND_0]) || - (residencyStart == -1 && !target_direction && current_raw[TEMPSENSOR_HOTEND_0] <= target_raw[TEMPSENSOR_HOTEND_0]) || - (residencyStart > -1 && labs(analog2temp(current_raw[TEMPSENSOR_HOTEND_0]) - analog2temp(target_raw[TEMPSENSOR_HOTEND_0])) > TEMP_HYSTERESIS) ) { + if ((residencyStart == -1 && target_direction && !isHeatingHotend0()) || + (residencyStart == -1 && !target_direction && !isCoolingHotend0()) || + (residencyStart > -1 && labs(degHotend0() - degTargetHotend0()) > TEMP_HYSTERESIS) ) { residencyStart = millis(); } #endif //TEMP_RESIDENCY_TIME @@ -915,23 +893,23 @@ inline void process_commands() break; case 190: // M190 - Wait bed for heater to reach target. #if TEMP_1_PIN > -1 - if (code_seen('S')) target_raw[TEMPSENSOR_BED] = temp2analog(code_value()); - codenum = millis(); - while(current_raw[TEMPSENSOR_BED] < target_raw[TEMPSENSOR_BED]) - { - if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. + if (code_seen('S')) setTargetBed(code_value()); + codenum = millis(); + while(isHeatingBed()) { - float tt=analog2temp(current_raw[TEMPSENSOR_HOTEND_0]); - Serial.print("T:"); - Serial.println( tt ); - Serial.print("ok T:"); - Serial.print( tt ); - Serial.print(" B:"); - Serial.println( analog2temp(current_raw[TEMPSENSOR_BED]) ); - codenum = millis(); - } + if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. + { + float tt=degHotend0(); + Serial.print("T:"); + Serial.println( tt ); + Serial.print("ok T:"); + Serial.print( tt ); + Serial.print(" B:"); + Serial.println( degBed() ); + codenum = millis(); + } manage_heater(); - } + } #endif break; #if FAN_PIN > -1 @@ -1331,24 +1309,8 @@ void wd_reset() { inline void kill() { - #if TEMP_0_PIN > -1 - target_raw[0]=0; - #if HEATER_0_PIN > -1 - WRITE(HEATER_0_PIN,LOW); - #endif - #endif - #if TEMP_1_PIN > -1 - target_raw[1]=0; - #if HEATER_1_PIN > -1 - WRITE(HEATER_1_PIN,LOW); - #endif - #endif - #if TEMP_2_PIN > -1 - target_raw[2]=0; - #if HEATER_2_PIN > -1 - WRITE(HEATER_2_PIN,LOW); - #endif - #endif + disable_heater(); + disable_x(); disable_y(); disable_z(); @@ -1369,4 +1331,4 @@ void manage_inactivity(byte debug) { } check_axes_activity(); } - + diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index b55573d93c..0c5a2e4ce2 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -37,28 +37,27 @@ #include "streaming.h" #include "temperature.h" -int target_bed_raw = 0; -int current_bed_raw = 0; int target_raw[3] = {0, 0, 0}; int current_raw[3] = {0, 0, 0}; -unsigned char temp_meas_ready = false; + +bool temp_meas_ready = false; unsigned long previous_millis_heater, previous_millis_bed_heater; #ifdef PIDTEMP - double temp_iState = 0; - double temp_dState = 0; - double pTerm; - double iTerm; - double dTerm; + float temp_iState = 0; + float temp_dState = 0; + float pTerm; + float iTerm; + float dTerm; //int output; - double pid_error; - double temp_iState_min; - double temp_iState_max; - double pid_setpoint = 0.0; - double pid_input; - double pid_output; + float pid_error; + float temp_iState_min; + float temp_iState_max; + float pid_setpoint = 0.0; + float pid_input; + float pid_output; bool pid_reset; float HeaterPower; @@ -67,6 +66,11 @@ unsigned long previous_millis_heater, previous_millis_bed_heater; float Kd=DEFAULT_Kd; float Kc=DEFAULT_Kc; #endif //PIDTEMP + +#ifdef WATCHPERIOD + int watch_raw[3] = {-1000,-1000,-1000}; + unsigned long watchmillis = 0; +#endif //WATCHPERIOD #ifdef HEATER_0_MINTEMP int minttemp_0 = temp2analog(HEATER_0_MINTEMP); @@ -91,9 +95,9 @@ int bed_maxttemp = temp2analog(BED_MAXTEMP); void manage_heater() { -#ifdef USE_WATCHDOG - wd_reset(); -#endif + #ifdef USE_WATCHDOG + wd_reset(); + #endif float pid_input; float pid_output; @@ -330,6 +334,22 @@ void tp_init() +void setWatch() +{ +#ifdef WATCHPERIOD + if(isHeatingHotend0()) + { + watchmillis = max(1,millis()); + watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; + } + else + { + watchmillis = 0; + } +#endif +} + + // Timer 0 is shared with millies ISR(TIMER0_COMPB_vect) { @@ -500,4 +520,5 @@ ISR(TIMER0_COMPB_vect) #endif #endif } -} +} + diff --git a/Marlin/temperature.h b/Marlin/temperature.h index a36f997815..fcc8edb9ea 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -22,18 +22,97 @@ #define temperature_h #include "Marlin.h" +#include "fastio.h" #ifdef PID_ADD_EXTRUSION_RATE #include "stepper.h" #endif -void tp_init(); -void manage_heater(); -//int temp2analogu(int celsius, const short table[][2], int numtemps); -//float analog2tempu(int raw, const short table[][2], int numtemps); + +void tp_init(); //initialise the heating +void manage_heater(); //it is critical that this is called periodically. + +enum TempSensor {TEMPSENSOR_HOTEND_0=0,TEMPSENSOR_BED=1, TEMPSENSOR_HOTEND_1=2}; + +//low leven conversion routines +// do not use this routines and variables outsie of temperature.cpp int temp2analog(int celsius); int temp2analogBed(int celsius); float analog2temp(int raw); float analog2tempBed(int raw); +extern int target_raw[3]; +extern int current_raw[3]; +extern float Kp,Ki,Kd,Kc; +#ifdef PIDTEMP + float pid_setpoint = 0.0; +#endif +#ifdef WATCHPERIOD + extern int watch_raw[3] ; + extern unsigned long watchmillis; +#endif + + +//high level conversion routines, for use outside of temperature.cpp +//inline so that there is no performance decrease. +//deg=degreeCelsius + +inline float degHotend0(){ return analog2temp(current_raw[TEMPSENSOR_HOTEND_0]);}; +inline float degHotend1(){ return analog2temp(current_raw[TEMPSENSOR_HOTEND_1]);}; +inline float degBed() { return analog2tempBed(current_raw[TEMPSENSOR_BED]);}; + +inline float degTargetHotend0() { return analog2temp(target_raw[TEMPSENSOR_HOTEND_0]);}; +inline float degTargetHotend1() { return analog2temp(target_raw[TEMPSENSOR_HOTEND_1]);}; +inline float degTargetBed() { return analog2tempBed(target_raw[TEMPSENSOR_BED]);}; + +inline void setTargetHotend0(float celsius) +{ + target_raw[TEMPSENSOR_HOTEND_0]=temp2analog(celsius); + #ifdef PIDTEMP + pid_setpoint = celsius; + #endif //PIDTEMP +}; +inline void setTargetHotend1(float celsius) { target_raw[TEMPSENSOR_HOTEND_1]=temp2analog(celsius);}; +inline void setTargetBed(float celsius) { target_raw[TEMPSENSOR_BED ]=temp2analogBed(celsius);}; + +inline bool isHeatingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];}; +inline bool isHeatingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];}; +inline bool isHeatingBed() {return target_raw[TEMPSENSOR_BED] > current_raw[TEMPSENSOR_BED];}; + +inline bool isCoolingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];}; +inline bool isCoolingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];}; +inline bool isCoolingBed() {return target_raw[TEMPSENSOR_BED] < current_raw[TEMPSENSOR_BED];}; + +inline void disable_heater() +{ + #if TEMP_0_PIN > -1 + target_raw[0]=0; + #if HEATER_0_PIN > -1 + WRITE(HEATER_0_PIN,LOW); + #endif + #endif + #if TEMP_1_PIN > -1 + target_raw[1]=0; + #if HEATER_1_PIN > -1 + WRITE(HEATER_1_PIN,LOW); + #endif + #endif + #if TEMP_2_PIN > -1 + target_raw[2]=0; + #if HEATER_2_PIN > -1 + WRITE(HEATER_2_PIN,LOW); + #endif + #endif +} +void setWatch() { + if(isHeatingHotend0()) + { + watchmillis = max(1,millis()); + watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; + } + else + { + watchmillis = 0; + } +} #ifdef HEATER_0_USES_THERMISTOR #define HEATERSOURCE 1 #endif @@ -41,18 +120,9 @@ float analog2tempBed(int raw); #define BEDSOURCE 1 #endif -//#define temp2analogh( c ) temp2analogu((c),temptable,NUMTEMPS) -//#define analog2temp( c ) analog2tempu((c),temptable,NUMTEMPS -extern float Kp; -extern float Ki; -extern float Kd; -extern float Kc; -enum {TEMPSENSOR_HOTEND_0=0,TEMPSENSOR_BED=1, TEMPSENSOR_HOTEND_1=2}; -extern int target_raw[3]; -extern int current_raw[3]; -extern double pid_setpoint; -#endif +#endif + diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde index 7eefec6682..444020c228 100644 --- a/Marlin/ultralcd.pde +++ b/Marlin/ultralcd.pde @@ -12,7 +12,7 @@ LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PIN unsigned long previous_millis_lcd=0; - +inline int intround(const float &x){return int(0.5+x);} volatile char buttons=0; //the last checked buttons in a bit array. int encoderpos=0; @@ -29,13 +29,10 @@ void lcd_status(const char* message) strncpy(messagetext,message,LCD_WIDTH); } -void clear() +inline void clear() { - //lcd.setCursor(0,0); + lcd.clear(); - //delay(1); - // lcd.begin(LCD_WIDTH,LCD_HEIGHT); - //lcd_init(); } long previous_millis_buttons=0; @@ -78,47 +75,48 @@ void lcd_init() void beep() { //return; -#ifdef ULTIPANEL - pinMode(BEEPER,OUTPUT); - for(int i=0;i<20;i++){ - WRITE(BEEPER,HIGH); - delay(5); - WRITE(BEEPER,LOW); - delay(5); - } -#endif + #ifdef ULTIPANEL + pinMode(BEEPER,OUTPUT); + for(int i=0;i<20;i++){ + WRITE(BEEPER,HIGH); + delay(5); + WRITE(BEEPER,LOW); + delay(5); + } + #endif } void beepshort() { //return; -#ifdef ULTIPANEL - pinMode(BEEPER,OUTPUT); - for(int i=0;i<10;i++){ - WRITE(BEEPER,HIGH); - delay(3); - WRITE(BEEPER,LOW); - delay(3); - } -#endif + #ifdef ULTIPANEL + pinMode(BEEPER,OUTPUT); + for(int i=0;i<10;i++){ + WRITE(BEEPER,HIGH); + delay(3); + WRITE(BEEPER,LOW); + delay(3); + } + #endif } + void lcd_status() { -#ifdef ULTIPANEL - static uint8_t oldbuttons=0; - static long previous_millis_buttons=0; - static long previous_lcdinit=0; -// buttons_check(); // Done in temperature interrupt - //previous_millis_buttons=millis(); + #ifdef ULTIPANEL + static uint8_t oldbuttons=0; + static long previous_millis_buttons=0; + static long previous_lcdinit=0; + // buttons_check(); // Done in temperature interrupt + //previous_millis_buttons=millis(); + + if((buttons==oldbuttons) && ((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) + return; + oldbuttons=buttons; + #else - if((buttons==oldbuttons) && ((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) - return; - oldbuttons=buttons; -#else - - if(((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) - return; -#endif + if(((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) ) + return; + #endif previous_millis_lcd=millis(); menu.update(); @@ -161,8 +159,7 @@ void buttons_check() if((blocking3)||force_lcd_update) + int tHotEnd0=intround(degHotend0()); + if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) //>1 because otherwise the lcd is refreshed to often. { lcd.setCursor(1,0); - lcd.print(ftostr3(analog2temp(current_raw[TEMPSENSOR_HOTEND_0]))); - oldcurrentraw=current_raw[TEMPSENSOR_HOTEND_0]; + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; } - if((target_raw[TEMPSENSOR_HOTEND_0]!=oldtargetraw)||force_lcd_update) + int ttHotEnd0=intround(degTargetHotend0()); + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) { lcd.setCursor(5,0); - lcd.print(ftostr3(analog2temp(target_raw[TEMPSENSOR_HOTEND_0]))); - oldtargetraw=target_raw[TEMPSENSOR_HOTEND_0]; + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; } #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 - static int oldcurrentbedraw=-1; - static int oldtargetbedraw=-1; - if((current_bed_raw!=oldcurrentbedraw)||force_lcd_update) + static int oldtBed=-1; + static int oldtargetBed=-1; + int tBed=intround(degBed()); + if((tBed!=oldtBed)||force_lcd_update) { lcd.setCursor(1,0); - lcd.print(ftostr3(analog2temp(current_bed_raw))); - oldcurrentraw=current_raw[TEMPSENSOR_BED]; + lcd.print(ftostr3(tBed)); + olddegHotEnd0=tBed; } - if((target_bed_raw!=oldtargebedtraw)||force_lcd_update) + int targetBed=intround(degTargetBed()); + if((targetBed!=oldtargetBed)||force_lcd_update) { lcd.setCursor(5,0); - lcd.print(ftostr3(analog2temp(target_bed_raw))); - oldtargetraw=target_bed_raw; + lcd.print(ftostr3(targetBed)); + oldtargetBed=targetBed; } #endif //starttime=2; @@ -327,8 +327,8 @@ void MainMenu::showStatus() messagetext[0]='\0'; } #else //smaller LCDS---------------------------------- - static int oldcurrentraw=-1; - static int oldtargetraw=-1; + static int olddegHotEnd0=-1; + static int oldtargetHotEnd0=-1; if(force_lcd_update) //initial display of content { encoderpos=feedmultiply; @@ -338,18 +338,21 @@ void MainMenu::showStatus() #endif } + int tHotEnd0=intround(degHotend0()); + int ttHotEnd0=intround(degTargetHotend0()); - if((abs(current_raw[TEMPSENSOR_HOTEND]-oldcurrentraw)>3)||force_lcd_update) + + if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) { lcd.setCursor(1,0); - lcd.print(ftostr3(analog2temp(current_raw[TEMPSENSOR_HOTEND]))); - oldcurrentraw=current_raw[TEMPSENSOR_HOTEND]; + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; } - if((target_raw[TEMPSENSOR_HOTEND]!=oldtargetraw)||force_lcd_update) + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) { lcd.setCursor(5,0); - lcd.print(ftostr3(analog2temp(target_raw[TEMPSENSOR_HOTEND]))); - oldtargetraw=target_raw[TEMPSENSOR_HOTEND]; + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; } if(messagetext[0]!='\0') @@ -426,7 +429,7 @@ void MainMenu::showPrepare() if((activeline==line) && CLICKED) { BLOCK - target_raw[TEMPSENSOR_HOTEND_0] = temp2analog(170); + setTargetHotend0(170); beepshort(); } }break; @@ -531,7 +534,7 @@ void MainMenu::showControl() if(force_lcd_update) { lcd.setCursor(0,line);lcd.print(" \002Nozzle:"); - lcd.setCursor(13,line);lcd.print(ftostr3(analog2temp(target_raw[TEMPSENSOR_HOTEND_0]))); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degHotend0()))); } if((activeline==line) ) @@ -541,11 +544,11 @@ void MainMenu::showControl() linechanging=!linechanging; if(linechanging) { - encoderpos=(int)analog2temp(target_raw[TEMPSENSOR_HOTEND_0]); + encoderpos=intround(degHotend0()); } else { - target_raw[TEMPSENSOR_HOTEND_0] = temp2analog(encoderpos); + setTargetHotend0(encoderpos); encoderpos=activeline*lcdslow; beepshort(); } @@ -1590,4 +1593,5 @@ char *fillto(int8_t n,char *c) #else inline void lcd_status() {}; #endif - + +