MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Update realtime, DLP comments

Browse Source
This commit is contained in:
Scott Lahteine 2021-04-19 00:07:57 -05:00
parent d5143c2c15
commit 2c2984fd29
1 changed files with 17 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
Marlin/Configuration_adv.h
View File

@ -2141,8 +2141,19 @@
//#define EMERGENCY_PARSER //#define EMERGENCY_PARSER
/** /**
* Realtime Reporting * Realtime Reporting (requires EMERGENCY_PARSER)
* Add support for commands S000 State, P000 Pause, and R000 Resume *
* - Report position and state of the machine (like Grbl).
* - Auto-report position during long moves.
* - Useful for CNC/LASER.
*
* Adds support for commands:
* S000 : Report State and Position while moving.
* P000 : Instant Pause / Hold while moving.
* R000 : Resume from Pause / Hold.
*
* - During Hold all Emergency Parser commands are available, as usual.
* - Enable NANODLP_Z_SYNC and NANODLP_ALL_AXIS for move command end-state reports.
*/ */
//#define REALTIME_REPORTING_COMMANDS //#define REALTIME_REPORTING_COMMANDS
#if ENABLED(REALTIME_REPORTING_COMMANDS) #if ENABLED(REALTIME_REPORTING_COMMANDS)
@ -3778,14 +3789,13 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will
* string to enable synchronization with DLP projector exposure. This change will allow to use * output a "Z_move_comp" string to enable synchronization with DLP projector exposure.
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands.
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Send a "Z_move_comp" report for any axis move (not just Z).
// Default behavior is limited to Z axis only.
#endif #endif
/** /**