✨ Opulo LumenPnP REV04 (#24718)
This commit is contained in:
Stephen Hawes
Scott Lahteine
parent
1a2e591d03
commit
2f1b89bd1f
@ -421,6 +421,7 @@
|
||||
#define BOARD_ARTILLERY_RUBY 4238 // Artillery Ruby (STM32F401RC)
|
||||
#define BOARD_FYSETC_SPIDER_V2_2 4239 // FYSETC Spider V2.2 (STM32F446VE)
|
||||
#define BOARD_CREALITY_V24S1_301F4 4240 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
|
||||
#define BOARD_OPULO_LUMEN_REV4 4241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
|
||||
@ -701,6 +701,8 @@
|
||||
#include "stm32f4/pins_ARTILLERY_RUBY.h" // STM32F4 env:Artillery_Ruby
|
||||
#elif MB(CREALITY_V24S1_301F4)
|
||||
#include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4 env:STM32F401RC_creality env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
|
||||
#elif MB(OPULO_LUMEN_REV4)
|
||||
#include "stm32f4/pins_OPULO_LUMEN_REV4.h" // STM32F4 env:Opulo_Lumen_REV4
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
|
||||
206
Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h
Normal file
206
Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h
Normal file
@ -0,0 +1,206 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* STM32F407VET6 on Opulo Lumen PnP Rev3
|
||||
* Website - https://opulo.io/
|
||||
*/
|
||||
|
||||
#define ALLOW_STM32DUINO
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "LumenPnP Motherboard REV04"
|
||||
#define DEFAULT_MACHINE_NAME "LumenPnP"
|
||||
|
||||
/**
|
||||
* By default, the extra stepper motor configuration is:
|
||||
* I = Left Head
|
||||
* J = Right Head
|
||||
* K = Auxiliary (Conveyor belt)
|
||||
*/
|
||||
|
||||
#define SRAM_EEPROM_EMULATION
|
||||
#define MARLIN_EEPROM_SIZE 0x2000 // 8K
|
||||
|
||||
// I2C MCP3426 (16-Bit, 240SPS, dual-channel ADC)
|
||||
#define HAS_MCP3426_ADC
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB10
|
||||
#define SERVO1_PIN PB11
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC6
|
||||
#define Y_STOP_PIN PD15
|
||||
#define Z_STOP_PIN PD14
|
||||
|
||||
// None of these require limit switches by default, so we leave these commented
|
||||
// here for your reference.
|
||||
//#define I_MIN_PIN PA8
|
||||
//#define I_MAX_PIN PA8
|
||||
//#define J_MIN_PIN PD13
|
||||
//#define J_MAX_PIN PD13
|
||||
//#define K_MIN_PIN PC9
|
||||
//#define K_MAX_PIN PC9
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PB15
|
||||
#define X_DIR_PIN PB14
|
||||
#define X_ENABLE_PIN PD9
|
||||
|
||||
#define Y_STEP_PIN PE15
|
||||
#define Y_DIR_PIN PE14
|
||||
#define Y_ENABLE_PIN PB13
|
||||
|
||||
#define Z_STEP_PIN PE7
|
||||
#define Z_DIR_PIN PB1
|
||||
#define Z_ENABLE_PIN PE9
|
||||
|
||||
#define I_STEP_PIN PC4
|
||||
#define I_DIR_PIN PA4
|
||||
#define I_ENABLE_PIN PB0
|
||||
|
||||
#define J_STEP_PIN PE11
|
||||
#define J_DIR_PIN PE10
|
||||
#define J_ENABLE_PIN PE13
|
||||
|
||||
#define K_STEP_PIN PD6
|
||||
#define K_DIR_PIN PD7
|
||||
#define K_ENABLE_PIN PA3
|
||||
|
||||
#if HAS_TMC_SPI
|
||||
/**
|
||||
* Make sure to configure the jumpers on the back side of the Mobo according to
|
||||
* this diagram: https://github.com/MarlinFirmware/Marlin/pull/23851
|
||||
*/
|
||||
#error "SPI drivers require a custom jumper configuration, see comment above! Comment out this line to continue."
|
||||
|
||||
#if AXIS_HAS_SPI(X)
|
||||
#define X_CS_PIN PD8
|
||||
#endif
|
||||
#if AXIS_HAS_SPI(Y)
|
||||
#define Y_CS_PIN PB12
|
||||
#endif
|
||||
#if AXIS_HAS_SPI(Z)
|
||||
#define Z_CS_PIN PE8
|
||||
#endif
|
||||
#if AXIS_HAS_SPI(I)
|
||||
#define I_CS_PIN PC5
|
||||
#endif
|
||||
#if AXIS_HAS_SPI(J)
|
||||
#define J_CS_PIN PE12
|
||||
#endif
|
||||
#if AXIS_HAS_SPI(K)
|
||||
#define K_CS_PIN PA2
|
||||
#endif
|
||||
|
||||
#elif HAS_TMC_UART
|
||||
|
||||
#define X_SERIAL_TX_PIN PD8
|
||||
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
|
||||
|
||||
#define Y_SERIAL_TX_PIN PB12
|
||||
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
|
||||
|
||||
#define Z_SERIAL_TX_PIN PE8
|
||||
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
|
||||
|
||||
#define I_SERIAL_TX_PIN PC5
|
||||
#define I_SERIAL_RX_PIN I_SERIAL_TX_PIN
|
||||
|
||||
#define J_SERIAL_TX_PIN PE12
|
||||
#define J_SERIAL_RX_PIN J_SERIAL_TX_PIN
|
||||
|
||||
#define K_SERIAL_TX_PIN PA2
|
||||
#define K_SERIAL_RX_PIN K_SERIAL_TX_PIN
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define FAN_PIN PE2
|
||||
#define FAN1_PIN PE3
|
||||
#define FAN2_PIN PE4
|
||||
#define FAN3_PIN PE5
|
||||
|
||||
#define FAN_SOFT_PWM_REQUIRED
|
||||
|
||||
//
|
||||
// Neopixel
|
||||
//
|
||||
#define NEOPIXEL_PIN PC7
|
||||
#define NEOPIXEL2_PIN PC8
|
||||
|
||||
//
|
||||
// SPI
|
||||
//
|
||||
#define MISO_PIN PB4
|
||||
#define MOSI_PIN PB5
|
||||
#define SCK_PIN PB3
|
||||
|
||||
#define TMC_SW_MISO MISO_PIN
|
||||
#define TMC_SW_MOSI MOSI_PIN
|
||||
#define TMC_SW_SCK SCK_PIN
|
||||
|
||||
//
|
||||
// I2C
|
||||
//
|
||||
#define I2C_SDA_PIN PB7
|
||||
#define I2C_SCL_PIN PB6
|
||||
|
||||
/**
|
||||
* The index mobo rev03 has 3 aux ports. We define them here so they may be used
|
||||
* in other places and to make sure someone doesn't have to go look up the pinout
|
||||
* in the board files. Each 12 pin aux port has this pinout:
|
||||
*
|
||||
* VDC 1 2 GND
|
||||
* 3.3V 3 4 SCL (I2C_SCL_PIN)
|
||||
* PWM1 5 6 SDA (I2C_SDA_PIN)
|
||||
* PWM2 7 8 CIPO (MISO_PIN)
|
||||
* A1 9 10 COPI (MOSI_PIN)
|
||||
* A2 11 12 SCK (SCK_PIN)
|
||||
*/
|
||||
#define LUMEN_AUX1_PWM1 PA15
|
||||
#define LUMEN_AUX1_PWM2 PA5
|
||||
#define LUMEN_AUX1_A1 PC0
|
||||
#define LUMEN_AUX1_A2 PC1
|
||||
|
||||
#define LUMEN_AUX2_PWM1 PA6
|
||||
#define LUMEN_AUX2_PWM2 PA7
|
||||
#define LUMEN_AUX2_A1 PC2
|
||||
#define LUMEN_AUX2_A2 PC3
|
||||
|
||||
#define LUMEN_AUX3_PWM1 PB8
|
||||
#define LUMEN_AUX3_PWM2 PB9
|
||||
#define LUMEN_AUX3_A1 PA0
|
||||
#define LUMEN_AUX3_A2 PA1
|
||||
@ -0,0 +1,51 @@
|
||||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F407xx",
|
||||
"f_cpu": "168000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x0483",
|
||||
"0xdf11"
|
||||
],
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"mcu": "stm32f407vet6",
|
||||
"variant": "MARLIN_F407VE"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407VE",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd"
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F407VE (192k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 131072,
|
||||
"maximum_size": 524288,
|
||||
"protocol": "dfu",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink",
|
||||
"blackmagic"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
@ -93,6 +93,17 @@ build_flags = ${stm32_variant.build_flags}
|
||||
-DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
|
||||
extra_scripts = ${stm32_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# STM32F407VET6 Opulo Lumen REV4
|
||||
#
|
||||
[env:Opulo_Lumen_REV4]
|
||||
extends = stm32_variant
|
||||
board = marlin_opulo_lumen_rev4
|
||||
build_flags = ${stm32_variant.build_flags}
|
||||
-DARDUINO_BLACK_F407VE
|
||||
-DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
|
||||
extra_scripts = ${stm32_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4)
|
||||
#
|
||||
|
||||
Loading…
Reference in New Issue
Block a user